1. Locate your rear tether strap attached to
the base.
2. Uncover the adjuster on your tether strap
and pull the loose end of the strap out
from the adjuster.
3. Identify a suitable anchoring point under
the front seat of your vehicle.
4. Route the strap around the anchor point
and through the adjuster.
5. Tighten your rear tether by pulling the
loose end of the strap.
6. Cover the adjuster with the pad provided.
COVER PAD
ADJUSTER
REAR TETHER STRAP INSTALLATION
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI