Fagor LA Series Owner's manual

LA Series
Fagor
Brand
Fagor
Model
LA Series
Type
Owner's manual

This manual is also suitable for

Fagor LA Series linear encoders are a versatile and high-performing solution for a wide range of industrial applications. With their advanced technology and robust design, these encoders deliver precise and reliable position feedback, enabling accurate motion control and measurement. Whether you need linear position measurement in factory automation, robotics, medical equipment, or any other industry, Fagor LA Series encoders provide reliable and accurate measurement capabilities.

Fagor LA Series linear encoders are a versatile and high-performing solution for a wide range of industrial applications. With their advanced technology and robust design, these encoders deliver precise and reliable position feedback, enabling accurate motion control and measurement. Whether you need linear position measurement in factory automation, robotics, medical equipment, or any other industry, Fagor LA Series encoders provide reliable and accurate measurement capabilities.

INFORMACION ELECTRICA - ELECTRICAL INFORMATION
FAGOR AUTOMATION S.COOP.
Bº San Andrés Nº19 – Apdo. de correos 144
20500 Arrasate - Mondragón
Spain
Tel. 34-943 71 92 00
Fax 34-943 79 17 12
www.fagorautomation.com
E-mail info@fagorautomation.es
Manual Code: 14460232
Manual Version: 1802
LAB
Características eléctricas / Electrical characteristics
LAB10 LAB50
Protocolo / Protocol BiSS C + 1Vpp
Alimentación / Power supply 5 V ± 10%, 250 mA
Resolución / Resolution 0.01 µm 0.05 µm
Número de bits / Number of bits 32
Longitud de cable / Cable length
Consultar con Fagor Automation
la longitud máxima de cable
Contact Fagor Automation for
maximum cable length
Radio de curvatura / Bending radius
Rígido / Rigid Flexible
Φ 6 mm >24 mm > 60 mm
Φ 10 mm (con protección) / (with protection) > 35 mm > 60 mm
Φ 8 mm > 50 mm > 64 mm
Montaje rígido con fijaciones
Rigid mounting with clamps
Flexionado común
Common bending
Flexionado común
Common bending
EC -...B – C9 Conector circular 17 macho / 17-pin male round connector
PIN 15 16 12 13 14 17 8 9 7 1 10 4
Carcasa
Housing
SEÑAL
SIGNAL
A /A B /B DATA /DATA CLOCK /CLOCK +5V +5V sensor 0V 0V sensor
Tierra
Ground
COLOR
Verde
Green
Amarillo
Yellow
Azul
Blue
Rojo
Red
Gris
Grey
Rosa
Pink
Negro
Black
Violeta
Purple
Marrón
Brown
Verde claro
Light green
Blanco
White
Naranja
Orange
Malla
Shield
EC-...B - C9
Cables para conexión directa de encoders absolutos Fagor BiSS C + 1Vpp
Cables for direct connection of Fagor BiSS C + 1Vpp absolute encoders
Sistemas Beckoff con BiSS C + 1Vpp
Beckoff systems with BiSS C + 1Vpp
Conexión directa Cable EC
Direct connection EC cable
EC-B-BF Longitud / length = 1, 3, 6, 9 m
Conexión con alargadera
Connection with extension cable
(4 x 2 x 0.14 mm2 + 4 x 0.5 mm2 + (4x0,14 mm2))
Cable EC
Alargadera intermedia opcional XCint
Intermediate extension cable optional XCint
Alargadera XC / Extension cable XC
EC-B-C9 Longitud / length = 1, 3 m XC-C8-F-C9 Longitud / length = 5, 10, 15, 20, 25 m XC-C8-F-BF Longitud / length = 5, 10, 15, 20, 25 m
Otros sistemas con BiSS C + 1Vpp (sin conector terminal)
Other systems with BiSS C + 1Vpp (without terminal connector)
Conexión directa Cable EC
Direct connection EC cable
EC-B-O Longitud / length = 1, 3, 6, 9 m
Conexión con alargadera
Connection with extension cable
(4 x 2 x 0.14 mm2 + 4 x 0.5 mm2 + (4x0,14 mm2))
Cable EC
Alargadera intermedia opcional XCint
Intermediate extension cable optional XCint
Alargadera XC / Extension cable XC
EC-B-C9 Longitud / length = 1, 3 m XC-C8-F-C9 Longitud / length = 5, 10, 15, 20, 25 m XC-C8-F-O Longitud / length = 5, 10, 15, 20, 25 m
Es posible orientar la salida del
conector a ambos lados.
The connector exit may be
oriented at both ends.
COMO MONTAR LA CABEZA LECTORA - HOW TO MOUNT THE READER HEAD
Quitar las tapas.
Remove the end caps.
Aflojar los tornillos del embalaje
de la cabeza.
Loosen the packing screws of
the reader head.
Introducir la cabeza por cual-
quiera de los dos extremos de la
regla.
Insert the reader head through
any of the two ends of the scale.
Fijar la cabeza lectora.
Los soportes fijan la distancia de
separación (2.5 mm) entre la
cabeza y la regla.
Quitar los soportes de la
cabeza.
Secure the reader head.
The supports set the 2.5 mm
gap between the reader head
and the scale.
Remove the reader head su-
pports.
Poner las tapas.
Mount the end caps.
DIN EN 100
Sistema autosujeción. No extraer tornillos
Self securing system
Do not take the screws out
Sólo aflojar.
No extraer
Just loosen.
Do not take out
Opciones de montaje
Mounting options
  • Page 1 1
  • Page 2 2

Fagor LA Series Owner's manual

LA Series
Fagor
Brand
Fagor
Model
LA Series
Type
Owner's manual
This manual is also suitable for

Fagor LA Series linear encoders are a versatile and high-performing solution for a wide range of industrial applications. With their advanced technology and robust design, these encoders deliver precise and reliable position feedback, enabling accurate motion control and measurement. Whether you need linear position measurement in factory automation, robotics, medical equipment, or any other industry, Fagor LA Series encoders provide reliable and accurate measurement capabilities.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents