-
Hello! I am an AI chatbot trained to assist you with the DYNATEK DYNA S Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
-
Where is the blinker relay located?
Which wire carries 12 volts from the ignition switch?
What should be done with the 10 mm bolt holding the spark advance assembly to the engine?
What should be done with the screws holding the points plate to the engine?
What should be done with the two wires connected where the points plugged in?
How to coat the advance assembly shaft?
How to ensure that the rotor rotates freely on the shaft?
How to install the DYNA S?
How to connect the wires?
How to plug the red wire from the DYNA S?
How to time the engine statically?
How to adjust the 3-4 timing?
