ANZZI L-AZ188BN Installation guide

L-AZ188BN

L-AZ188ORB

Cer tifie d by

IAP MO R&T

set screw

cap

hex-key

unscrew

spacer

1.Use provided hex-key loosen set screw.

2.Remove handle and unscrew spacer from

valve body.

3.Place handle onto cartridge in desired

position and tighten set screw with hex-key.

Cover handle hole with hot/cold cap.

1.65"

3.94"

2.56"

4.53"

handle

This manual is also suitable for