Prime-Line R 7230 Installation guide

Brand
Prime-Line
Model
R 7230
Type
Installation guide

Prime-Line R 7230

The Prime-Line R 7230 is a replacement roller for drawers. It is made of durable plastic and has a 3/4" outer diameter. The roller is designed to fit drawers with a 13/16" wide track and a 1-3/4" high back.

The R 7230 roller is easy to install. Simply remove the old roller from the drawer, and then install the new roller in its place. The roller is designed to center itself on the drawer, so you don't have to worry about it getting jammed.

The R 7230 roller is a great way to repair a broken drawer or to improve the performance of an existing drawer.

Prime-Line R 7230

The Prime-Line R 7230 is a replacement roller for drawers. It is made of durable plastic and has a 3/4" outer diameter. The roller is designed to fit drawers with a 13/16" wide track and a 1-3/4" high back.

The R 7230 roller is easy to install. Simply remove the old roller from the drawer, and then install the new roller in its place. The roller is designed to center itself on the drawer, so you don't have to worry about it getting jammed.

The R 7230 roller is a great way to repair a broken drawer or to improve the performance of an existing drawer.

R 7230 R 7230 R 7230
Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis
1-3/4"
4.4 cm
1-3/4"
4.4 cm
1-3/4"
4.4 cm
13/16"
21 mm
13/16"
21 mm
13/16"
21 mm
3-1/4"
8.2 cm
3-1/4"
8.2 cm
3-1/4"
8.2 cm
3/4" O.D.
19 mm
3/4" O.D.
19 mm
3/4" O.D.
19 mm
Remove drawer from opening by sliding completely out,
then drop down to release back roller from track. Remove
roller bracket. Install new roller in same location then install
drawer. NOTE: Center line of back roller must be on center
with back of drawer to avoid jamming.
Quite la gaveta de la apertura jalándola hasta afuera, luego
deje que caiga abajo para soltar el rodillo trasero de carril.
Quite el sostén del rodillo. Instale el nuevo rodillo en el mis-
mo lugar y vuelva a instalar la gaveta. NOTA: La linea central
del rodillo trasero debe estar centrada con la parte trasera
de la gaveta para prevenir que se trave.
Enlevez le tiroir en le glissant complètement hors de sa
cavité puis abaissez-le de manière à dégager le galet ar-
rière hors du rail. Retirez le support de galet et remplacez-le
au même endroit; puis réinstallez le tiroir, AVIS: La ligne
centrale du galet arrière doit être centrée avec l’arrière du
tiroir pour éviter de le coincer.
Remove drawer from opening by sliding completely out,
then drop down to release back roller from track. Remove
roller bracket. Install new roller in same location then install
drawer. NOTE: Center line of back roller must be on center
with back of drawer to avoid jamming.
Quite la gaveta de la apertura jalándola hasta afuera, luego
deje que caiga abajo para soltar el rodillo trasero de carril.
Quite el sostén del rodillo. Instale el nuevo rodillo en el mis-
mo lugar y vuelva a instalar la gaveta. NOTA: La linea central
del rodillo trasero debe estar centrada con la parte trasera
de la gaveta para prevenir que se trave.
Enlevez le tiroir en le glissant complètement hors de sa
cavité puis abaissez-le de manière à dégager le galet ar-
rière hors du rail. Retirez le support de galet et remplacez-le
au même endroit; puis réinstallez le tiroir, AVIS: La ligne
centrale du galet arrière doit être centrée avec l’arrière du
tiroir pour éviter de le coincer.
Remove drawer from opening by sliding completely out,
then drop down to release back roller from track. Remove
roller bracket. Install new roller in same location then install
drawer. NOTE: Center line of back roller must be on center
with back of drawer to avoid jamming.
Quite la gaveta de la apertura jalándola hasta afuera, luego
deje que caiga abajo para soltar el rodillo trasero de carril.
Quite el sostén del rodillo. Instale el nuevo rodillo en el mis-
mo lugar y vuelva a instalar la gaveta. NOTA: La linea central
del rodillo trasero debe estar centrada con la parte trasera
de la gaveta para prevenir que se trave.
Enlevez le tiroir en le glissant complètement hors de sa
cavité puis abaissez-le de manière à dégager le galet ar-
rière hors du rail. Retirez le support de galet et remplacez-le
au même endroit; puis réinstallez le tiroir, AVIS: La ligne
centrale du galet arrière doit être centrée avec l’arrière du
tiroir pour éviter de le coincer.
  • Page 1 1

Prime-Line R 7230 Installation guide

Brand
Prime-Line
Model
R 7230
Type
Installation guide

Prime-Line R 7230

The Prime-Line R 7230 is a replacement roller for drawers. It is made of durable plastic and has a 3/4" outer diameter. The roller is designed to fit drawers with a 13/16" wide track and a 1-3/4" high back.

The R 7230 roller is easy to install. Simply remove the old roller from the drawer, and then install the new roller in its place. The roller is designed to center itself on the drawer, so you don't have to worry about it getting jammed.

The R 7230 roller is a great way to repair a broken drawer or to improve the performance of an existing drawer.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents