Page is loading ...
User Manual
Instant Smart Translation Device
Rinkmo T2
Two-Way ·Real Time ·Easy View
Device Overview
Power- Turn ON/OFF device or Wakeup
Camera-Photo Translate
Vol+/- - Volume Control
Up Button – Select Target Language
Down Button – Select Source Language
Reset – Reset to factory settings
USB Charging- Micro USB Charging Port
Specification
Product size: 4.7 × 2.1 × 0.5 in
Product net weight: 85.5 g
Touch screen: 2.4inch
Screen Resolution: 240*320
Network: WIFI
System: Android 5.1
Charge port: 5pin Micro USB, 2.0 speed
Charging voltage: 5V/1A
Battery capacity: 1200mAh
Status Icon
WIFI Signal
White - Connected
Grey - Disconnect
Battery Level
Battery Level
Menu Icon
Getting Started
Step 1
1 Please check the power and charge the device for first use
by USB port on your computer or any charging plug.
2 Fully Charged will take 2 hours for every day use.
*Please find Micro USB charging cable in the package*
Step 2:
Long press the power button for 3-5 seconds to turn on the
device and “WELCOME” will display on screen.
Step 3
Connect your device with internet by any public WIFI or
connect 3G/4G hotspot from your smart phone.
To Turn on the WIFI:
Click the Internet icon or Go to
Setting>>WLAN>>Turn ON>>Select WIFI
Enter>>Enter Password>>Connected.
Step 4
Select Language A and Language B
Language A – Your source language or other 51 languages
(total 52)
Language B - Target language or
other 51 languages (total 52)
Press button to select more language and switch
between language A and language B.
Step 5
Press to Talk
1# Long press the DOWN button to speak your Language A
and release to translate, the text will be displayed on screen
and text to speech by voice.
2# Long press the UP button to speak language B and
release to translate.
Photo Translation
You can use your device’s camera to translate text on the
photos
Click the Photo Translation Icon:
1 At the top, Select the source language and target language
or switch the language by press the icon.
2 Point your camera at the text you want to translate
Single Tab – auto focus the text
Zoom In/Out – Use two fingers on the screen
to enlarge or narrow the photos
3 After the camera is focused, please take a shot, the
translated contents will be displayed on the screen
automatically.
4 Press the screen to switch between source text and
translated text.
5 Press icon to exit the menu.
System Language
Please go to settings>>set system
language. Default is English.
Clear Usage Record
Clear all the history translation record
System Upgrade
You may get more language support if
there is any update in there
About Device
System version
TOP 5 Questions
1 Does it need internet connection?
Yes, it needs internet connection for
two-way translate and better user experience.
2 Why it can not hear my voice?
It will take 3-5 seconds to recognize your personal voice for
first time use and faster in next time. More time to use and
more correct.
3 Why the translation is wrong?
#1 Make sure your internet connection is well
#2 Please try to speak in normal speak and less speed.
#3 Please wait 1 second to speak after you press the talk
button.
#4 Please avoid speaking colloquial and local slang.
4 Why I can not translate the text on photo
#1 Please check if your camera is well focused and not
blurred.
#2 Please make sure your internet is connected, then try
again.
5 Why it can not charge and start?
Please make sure your charging cable is well connected with
your device and USB charging plug or computer.
Package:
1*Translator
1*USB cable
1*User Manual
1*Rope
ANY QUESTIONS PLEASE DO CONACT WITH US
to reply you in 24 hour
Instant Smart Translation Device
/