2. MONODEAL
  3. 606345491642
606345491642

MONODEAL 606345491642 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the MONODEAL 606345491642 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I connect the MD863 to my TV/PC/MOBILE?
    How do I charge the headset?
    I'm not hearing any sound from the headset.
    The sound from the TV is not consistent.
    How can I get sound through both the headphones and TV?
    How can I get sound only through the headphones?
Q : How do I set up the MD863 to work with my TV/PC/MOBILE?
Please closely follow the user manual comes with the MD863 to connect it with your
TV/audio source. You can also visit Youtube for video guide:
https://youtu.be/qb0yJ2APAIU
Q : How to charge the headset
Carefully align “CHG “ port(Located at the right side headset) with the charging pins on
the base. The distance between two earmuffs may be larger after long time wearing,
so please press both the sides and top of the headset and make the necessary adjustment.
Make sure they make a good connection until green charging indicator light is displayed.
Turn off the headset while charging, so this doesn't ruin your battery and keeps it long
termed. You can also visit Youtube for video guide:
https://youtu.be/yFk_66SIvus
Q: I already plugged everything in, but I still can't hear any sound from the headset
The most frequent causes of this are the following:
No valid audio signal being fed into the transmitter. If you're using the RCA ports on your
TV, ensure you use the red/white ports labeled “AUDIO OUT”, any other (non-labeled)
red/white ports are incorrect and usually for input.
Check if the the red or white RCA cord is loose. Make sure both are connected well with
your TV.
Check if you can hear any sound by plugging the headphones directly into the TV audio
out.
Q: The sound from the TV is not consistent
1) Check if there is a radio playing in the room. The radio frequency will interfere the
TV signal. Please turn off the radio.
2) Check if the power adapter and the base is too close; if the base and the TV is too close.
Keep both distance no less than 0.5m to avoid interference.
3) When the signal is too poor to receive, the headset will turn into dormant state, Please
press “AUTO TUNE” button on the headset.
4) If TV sound is too low, headset can’t receive the signal, please kindly turn up the
volume of TV.
Q : How can I get the sound come through both the headphones and
the TV. I want other people in the room to hear the TV too.
1) For many older models of TV, the internal TV speaker is muted when any of the audio
output ports are connected (AUX, RCA, Optical, etc). For some TVs, e.g. LG, you can
choose to play audio from both the internal TV speakers and an external audio device
simultaneously. Please set your TV as below steps:
manual - set - audio set - output set - external audio device
Some setting may be different, you should contact your TV manufacturer for help if
needed.
2) For some TVS that may don’t have audio setting, you should connect the RF
headphone system to the cable box or set top box instead of the TV.<br>
3) Use an external speaker with audio splitter. e.g. use a 3.5mm audio splitter to share
the TV audio with an EXTERNAL SPEAKER in addition to the MD863.
Q : How can I get the sound only come through both the headphones?
I don’t want other people in the room to hear the TV.
1) You can choose to play audio from only the internal TV speakers. Please set your TV
as below steps:
manual - set - audio set - output set - internal TV speakers
2) Mute the TV
Some setting may be different, you should contact your TV manufacturer for help if
needed.
/