Watch and Assemble www.waybasics.com/help-wall-shelves Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Tools needed
1 2 3
4 5 6
7 8
Place bracket on wall. Level bracket.
Drill 8 holes into wall with 1/4 bit. Insert anchors into holes. Fasten bracket to wall anchors with
screws,
Mark 8 holes onto wall with pencil.
That was easy, wasn’t it?Insert shelf onto bracket.
Screws x8 Anchors x8
Bracket x1
Shelf x1
Included
Power Drill + 1/4 drill bit
Phillips Screwdriver
Level
WALL SHELVES
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Way Basics W-CUBE-EO User manual
-
Way Basics FS-10-36-1-WE Installation guide
-
Way Basics W-RECT-OE Operating instructions
-
Way Basics WB-3NC-BK Operating instructions
-
Way Basics C-6CUBE-EO Installation guide
-
Way Basics C-6CUBE-D-NL Installation guide
-
Way Basics WB-2SWRC-EO Operating instructions
-
Way Basics WB-4CUBE-GN User manual
-
Way Basics BS-CB-1-WE Installation guide
-
Way Basics C-6CUBE-BK Installation guide
Other documents
-
Rubbermaid homefree Series User manual
-
DreamLine SHDR-4152720-04 Installation guide
-
ClosetMaid MasterSuite Installer's Assembly, Installation & Reference Manual
-
NewAge Products Inc. 40404 User guide
-
NewAge Products Inc. 40406 User guide
-
NewAge Products Inc. 40400 User guide
-
NewAge Products Inc. 40402 Installation guide
-
Vivo MOUNT-SF002B Assembly Instructions
