Way Basics FS-10-24-1-GN Installation guide

Type
Installation guide
Watch and Assemble www.waybasics.com/help-wall-shelves Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Tools needed
1 2 3
4 5 6
7 8
Place bracket on wall. Level bracket.
Drill 8 holes into wall with 1/4 bit. Insert anchors into holes. Fasten bracket to wall anchors with
screws,
Mark 8 holes onto wall with pencil.
That was easy, wasnt it?Insert shelf onto bracket.
Screws x8 Anchors x8
Bracket x1
Shelf x1
Included
Power Drill + 1/4 drill bit
Phillips Screwdriver
Level
WALL SHELVES
  • Page 1 1

Way Basics FS-10-24-1-GN Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI