Whirlpool WME 3621 X AQUA.1 User guide

Brand: Whirlpool

Model: WME 3621 X AQUA.1

Type: User guide

Read the Instructions for Use carefully before using

the appliance.

19514799100

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

SENSE FRESH CONTROL

This function automatically works

to ensure the optimal conditions

to preserve the stored food.

FAN

The Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is switched on.

Fan deactivation/reactivation: Fan is active by default.

To deactivate/reactivate the fan follow the process described below:

- Push the Light Button as indicated in picture 2: the light will switch off;

- Without releasing the Light button, keep pressed the Temperature button too as indicated in picture 3: the light will blink once if the fan has been deactivated (OFF) , or it will blink

three times if the fan has been activated (ON).

Note: Deactivation of the fan switches off function 6th Sense Fresh Control in the fridge.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs light, allowing a

better lightning as well as a very low energy consumption.

If the LED light system does not work, please contact the Service to replace it.

Important: The refrigerator compartment light switches on when the

refrigerator door is opened. If the door is kept open for more then 8 minutes the

light will be automatically switched off.

Indicator LEDs to display the current temperature setpoint or the Fast Cooling

function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling capacity of the refrigerator compartment

when placing a very high quantity of food within it,

To activate the Fast Cooling function, press the Temperature

button cyclically on the control panel till all the 3 LEDs blink and

remain on.

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

The function is automatically deactivated after 6 hours and return

to previous selected set point. The function can be manually

deactivated by press Temperature button on the control panel.

ON/STANDBY button.

TEMPERATURE button

ON/STANDBY function

To put the product in Stand-by,

press and hold the On/Standby

button for 3 seconds. All the

temperature indicators turn off.

Press again to reactivate the

appliance. (see the Instructions

for Use)

TEMPERATURE setting

Press the Temperature button on the control panel to adjust

the temperature from the warmest through the lower to the

coldest level.

Pressing the Temperature button, the temperature setting will

change cyclically.

At first plug-in of appliance temperature setpoint is present at

medium position (factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average

temperature throughout the whole refrigerator.

1. Fan*

2. Electronic control panel / light unit

3. Multi-flow cold air area*

4. Bottle rack *

5. Sensor cover

6. Area shelves

7. Rating plate with commercial name

8. Fruits and vegetables crisper

9. Crisper divider*

10. Door reversibility kit*

11. Egg tray*

12. Bottle separator*

13. Door trays

14. Door seal

15. Water tank

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply, the

display lights up and all the icons appear on the display for

approximately 1 second. The default (factory) values of the

fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary from

model

Led ON Led OFFLed ON Led OFF

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Fast Cooling

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Fast Cooling

19514799100

QUICK START GUIDE

UTILISATION AND MAINTENANCE OF THE WATER DISPENSER AND FILTER

Water dispenser

First use

The first time you use the water dispenser or after a long period left not used wash the tank and the filter with water. The water di

spenser provides fresh, filtered water, without the need of opening the refrigerator door. This will reduce the number of times the

door is opened, thus also reducing energy consumption of the product.

Fitting and replacing the active carbon filter

The water filter should be removed from the foil bag (found in the crisper drawer (item 7). Follow the instructions provided with

the filter.

Important: If the filter is left dry for an extended period of time, its performance may be reduced. Immerse the filter in water for a

few seconds to reinstate optimum performance.

To fill the tank, rotate the cap in the direction ofthe

arrow

Tank

Fig. 1

Water tank (fig. 1)

The water tank is made of antibacterial material. This prevents and reduces

the proliferation of bacteria. An internal container, with an active carbon

filtered ensures water filtration. To fill the tank: rotate the water inlet towards

you and fill with water, using a jug or other suitable container. Once the tank

is full, close the water inlet by moving it back to its original position. Always

use drinking water only: any other liquid may impair product performance.

Activation

device

Stop

Water drip

tray

Fig. 2

Obtaining filtered water (fig. 2)

After filling the tank, the water may not be immediately available. This is

because the filtering process may require a few minutes (depending on the

amount of water in the tank).

To dispense water: with the refrigerator door closed, press the water

dispenser tab with the glass. If for safety reason water delivery must be

prevented, simply press the stop at the back of the tab. To release water

delivery, move the stop back to its original position. It is recommended to

drink the supplied water from the dispenser in 6 hours.

Fig. 3

Cleaning the water tank (fig. 3-4-5-6-7-8)

Periodically clean the water tank with running water. Twice a year it is

recommended to keep healthy the unit using specific products based on

diluted chlorine that not modify the material properties and rinse with

current water.

To clean the tank, proceed as follows:

- (fig. 3) release and remove the water tank by lifting it and pulling towards

you. Place the tank on a flat surface, remove and wash the top cover.

Note: the tank must be refitted in its position as soon as possible, to

prevent the refrigerator from overheating.

Fig. 4

- (fig. 4) remove the internal container and the filter, and wash them

separately.

When washing the filter, only use clean water

(no detergent or sharp tools).

To clean the disk filter, first remove it from the container.

Fig. 5 Fig. 6

- (fig. 5) for a more thorough cleaning, remove the valve cap (the fitting

connecting the tank to the refrigerator) by rotating it anticlockwise.

Cleanthe cap. Important: do not pull on the valve body (fig. 6).

Fig. 7

- (fig. 7) replace the valve cap by rotating clockwise.

Fig. 8

- (fig. 8) fit the tank back in place by placing it between the

lateral guides of the door and pushing it in position, ensuring

that the valve is back in its original seat. Check that the there are

no gaps between the rubber seal of the tank and the door.

Water Filter Duration

To ensure optimum performance you should change the water filter according with the following table:

Water consumption (average) Filter duration

3.0 l/day 4 months

4.5 l/day 3 months

6.0 l/day 2 months

Filter replacement is not covered by product warranty. To order more water filter cartridges, please contact your after-sales ser-

vice.

Whirlpool WME 3621 X AQUA.1 User guide

Whirlpool WME 3621 X AQUA.1 User guide

Whirlpool WME 3621 X AQUA.1 User guide

Related papers

Other documents