Manchester MAN-1406-AC User manual

Type
User manual

This manual is also suitable for

ASSEMBLY INSTRUCTIONS:
MANCHESTER FACEPLATE & STANDARD MASONRY BOX
Assembly Instructions:
1. Line up the hinges on the faceplate with the
notches on the masonry box and insert the
faceplate into the box (Figure 1).
2. Open the faceplate door and insert the
mounting bolts through the holes in the
faceplate and into the threaded inserts on
the masonry box. There are 2 bolts/holes;
one on each side (Figure 2).
3. Tighten both bolts with a screwdriver
(Figure 3).
4. Apply a thin bead of silicone to the outside
seam where the masonry box meets the
rear of the faceplate. This bead of silicone
should only be applied to the top and two
side seams of the assembly. Do not apply to
the bottom seam (Figure 4).
5. Let the silicone harden overnight before
installing the assembly into your column or
pilaster.
Figure 1
QualArc, Inc.
11300 Trade Center Dr., Ste. A
Rancho Cordova, CA 95742
916-273-1576
Fax 916-635-0228
www.qualarc.com
Figure 2
Figure 3
Figure 4
Match your Manchester
®
with an optional
address plaque or newspaper box.
Special order from your retailer today!
  • Page 1 1

Manchester MAN-1406-AC User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI