Canon imagePROGRAF iPF670 Owner's manual

Brand: Canon

Model: imagePROGRAF iPF670

Type: Owner's manual

Canon imagePROGRAF Print Utility Guide

Version 1.10

Canon Inc.

About the Canon imagePROGRAF Print Utility

The Canon imagePROGRAF Print Utility is an application software specially for the iPad for

printing PDF data and image data using an iPF printer.

Supported File Formats

The following file formats are supported.

- PDF

- JPEG

- PNG

<<Important>>

- JPEG and PNG are supported by version 1.1.0 and later of the Canon imagePROGRAF Print

Utility.

Work Required Before Use

The following work needs to be performed in advance before using the Canon

imagePROGRAF Print Utility.

1. Connect to the network

Check that the iPad, wireless router, and iPF printer are connected to the same network.

<<Important>>

- A wireless router (access point) is required for printing.

- Check that the iPad and wireless router are connected. For details on how to connect and

how to check the settings, refer to the instruction manuals or contact the manufacturers of

your iPad and wireless router.

- Either connect the printer and wireless router directly using a LAN cable or connect them

in the same network using a LAN cable. (iPF printers do not support wireless connection.)

iPad

Wireless route

iPF printer

Wireless route

iPad iPF printer

2. Download the Canon imagePROGRAF Print Utility

Download the Canon imagePROGRAF Print Utility from the App Store.

<<Important>>

- Download requires registration for an App Store account.

- Canon imagePROGRAF Print Utility can be downloaded for free; however, transmission

fees for connecting to App Store apply.

- Check the details given in the App Store for more information on the supported operating

systems and supported models.

- Download is not possible if your operating system environment does not support the

Canon imagePROGRAF Print Utility. The Canon imagePROGRAF Print Utility download

page may not appear as well.

<Note>

- The Canon imagePROGRAF Print Utility appears as "iPF Print" on the screen.

Printing

The procedure for printing is as follows.

<Note>

- This manual uses iOS version 8.1. The screen and term that is displayed may differ

depending on the model of iPad you are using.

1. Run an application that can open PDF files or image files and select the file you want to

print.

2. Run the Canon imagePROGRAF Print Utility from the application.

<Note>

- For PDF files, it is not possible to print to an iPF printer if you cannot run the Canon

imagePROGRAF Print Utility from the application. If this happens, use a different

application to open the PDF file.

- The procedure for running the Canon imagePROGRAF Print Utility differs between

applications. Refer to the instruction manual or contact the manufacturer of the

application you are using.

Example of the operation for starting the utility:

Tap -> Tap Open In -> Tap Open in iPF Print

- For image files, you can also select the files from Photo Albums in the Canon

imagePROGRAF Print Utility and print.

3. Tap Printer Setting.

4. Tap + in the screen that opens.

<Note>

- If the printer you want to use is already registered, tap the printer name here to select it

and proceed to step 7.

5. The printers are detected and displayed in a list. Tap the printer you want to use to select it.

<Note>

- Printers that are connected to the same network as the wireless router are detected.

6. Tap the printer name of the printer you want to add. Set the printer name as needed on

the screen that is displayed and then tap OK.

<Note>

- You can register multiple printers by repeating steps 1 to 5.

7. Tap Print. Printing begins.

<Note>

- You can only print the current page. You cannot print multiple pages at the same time.

- If the size of the paper loaded in the printer is smaller than the configured printer paper

size, part of the image might not be printed.

- If you want to change the print settings, tap .

Usage Cautions

Take note of the following cautions when using the Canon imagePROGRAF Print Utility.

- If you change the HP-GL/2 setting on the printer control panel, problems such as the

position of the image being shifted or part of the image not being printed may occur.

Always set the following items in GL2 Settings on the control panel to the printer default

values.

Setting Item Default value

Margin 3mm(Standard)

Auto Rotate Off

Oversize* On

On-the-Fly* Off

PageSizeProcess1* Off

Detect img size* Off

* indicates items that are only able to be set for certain models.

- If the Color Mode is set to Monochrome in Print Settings in the Canon imagePROGRAF

Print Utility, printing is performed in monochrome even if the Color Mode is set to color in

GL2 Settings on the printer control panel.

- If the print data cannot be correctly sent to the printer for some reason, a solid black image

may be printed. If this happens, you should update the printer firmware to the latest

version to ensure that a solid black image is not printed.

- When printing PDF files, if the Printer Paper Size in Print Settings in the Canon

imagePROGRAF Print Utility is set to the same size as the document size, the image is

printed reduced so that the image will fit inside the printable area with approximately 3 mm

cut off from the top, bottom, left, and right edges of the printer paper size.

If you want to print without the image being reduced, set Printer Paper Size in Print Settings

to Same as document size. In this case, although the image is printed at the same size as

the document without reduction, approximately 3 mm of the circumference of the

document is not used for printing.

■ Trademarks

- Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of

CANON INC.

- iPad is a trademark of Apple Inc., registered in the U.S. and other countries.

- App Store is a service mark of Apple Inc.

■ Copyright

- Duplicating all or part of the content of this manual without permission is prohibited.

■ Notices

- The content of this manual is subject to change without notice.

Canon imagePROGRAF iPF670 Owner's manual

Canon imagePROGRAF iPF670 Owner's manual

Canon imagePROGRAF iPF670 Owner's manual

Related papers

Other documents