2. Harbor Freight Tools
  3. 95862

Harbor Freight Tools 95862, Coaxial Cable Compression Tool, Item 95862 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Harbor Freight Tools 95862 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
COAXIAL CRIMPER
Model
95862
OPERATION INSTRUCTIONS.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
OPERATION
Caution: Wear ANSI-approved safety goggles and heavy duty work gloves.
Strip 0.25” through shield braid and inner foam insulation of cable to center conductor.
Strip 0.25” more back, but do not pierce shield braid.
Fan shield braid back from inner insulation.
Insert the cable into the Connector until the inner insulation is even with the hole.
Insert the cable and Connector into the Crimper and squeeze handles together until
the Connector is firmly attached to the cable.
Pull on the Connector to ensure it is solidly connected. If Connector moves, repeat
steps 1 - 4.
1.
2.
3.
4.
5.
Cable
shield
.25”
.25”
/