Therma-Tru Light Commercial Doors and Frames User manual
- Type
- User manual
Therma-Tru Light Commercial Doors and Frames are designed for heavy-duty use in commercial and multi-family buildings. They are fabricated from high-quality materials and offer a variety of features to meet the specific needs of your project.
Features:
- Durable construction: Frames are made of 16-gauge steel, while doors are made of 22-gauge or 24-gauge steel.
- Reinforced for surface-mounted hardware: Doors and frames can be reinforced for surface-mounted hardware, such as panic exit devices and deadbolts.
- Adjustable: Adjusta-Fit frames can be adjusted to fit a variety of wall sizes, making them ideal for new construction or renovation projects.
Therma-Tru Light Commercial Doors and Frames are designed for heavy-duty use in commercial and multi-family buildings. They are fabricated from high-quality materials and offer a variety of features to meet the specific needs of your project.
Features:
- Durable construction: Frames are made of 16-gauge steel, while doors are made of 22-gauge or 24-gauge steel.
- Reinforced for surface-mounted hardware: Doors and frames can be reinforced for surface-mounted hardware, such as panic exit devices and deadbolts.
- Adjustable: Adjusta-Fit frames can be adjusted to fit a variety of wall sizes, making them ideal for new construction or renovation projects.
Therma-Tru
®
Light Commercial/Multi-Family - Doors and Frames
1
• Material shown on these drawings will be
fabricated only after formal approval by the
architect, receipt of approval hardware schedule,
and all necessary hardware templates.
• All frames shall be shipped “knocked-down”
unless otherwise specied.
• All frames and doors shall be chemically washed,
rinsed, and dried prior to receiving one coat of
paint.
• Doors and frames will be reinforced for surface
mounted hardware as required. Drilling and
tapping for surface mounted hardware shall be
applied by others.
• It will be the responsibility of the General
Contractor to coordinate hardware locations.
• All frames will be supplied with the required wall
and oor anchors as illustrated on the frame detail
sheet.
• All frames and doors wll be tagged with shop
marks. This schedule can be used to cross
reference shop marks with architects marks.
• These drawings are not intended for use by other
trades.
• Field welding, grinding, nishing, and attachment
of eld splices by others.
DOOR HANDING CHART • All standard type hardware will be located at this
manufacturer’s standard locations as shown on
the door and frame elevations. Hardware items
such as panic exit devices, deadbolts, etc. will also
be located at manufacturer’s standard locations
unless specically advised.
• Installations of all glass and glazing to be
performed by others.
• Doors, frames, and nished hardware to be
installed by others.
• Anchor bolts and expansion shields for any type
fastener to be furnished by others.
• All frames must be set absolutely plumb, square,
and level.
• All frames will be supplied with rubber door
silencers: three for single swing openings and two
per header for double swing openings.
SHEET NUMBER:
OF
JOB NUMBER:
ARCHITECT:
LOCATION:
PROJECT:
FINISHED HARDWARE BY:
CONTRACTOR:
RECORD OF SUBMITTALS
SUBMITTED
RETURNED
1st
2nd
3rd
4th
RECORDED APPROVED DRAWINGS
DRAWN BY:
RECORDED APPROVED HARDWARE
GENERAL NOTES
OUTSIDE
LEFT HAND INSWING
OUTSIDE
RIGHT HAND INSWING
OUTSIDE
LEFT HAND REVERSE
OUTSIDE
RIGHT HAND REVERSE
SINGLE DOORS
RIGHT HAND REVERSE/
LEFT HAND OUTSWING
LEFT HAND REVERSE/
RIGHT HAND OUTSWING
SINGLE DOORS
OUTSIDE OUTSIDE
OUTSIDE OUTSIDE
LEFT HAND ACTIVE RIGHT HAND ACTIVE
LEFT HAND REVERSE ACTIVE RIGHT HAND REVERSE ACTIVE
PAIRS OF DOORS
LEFT HAND REVERSE ACTIVE/
RIGHT HAND OUTSWING ACTIVE
OUTSIDE OUTSIDE
OUTSIDE OUTSIDE
LEFT HAND ACTIVE RIGHT HAND ACTIVE
LEFT HAND REVERSE ACTIVE RIGHT HAND REVERSE ACTIVE
PAIRS OF DOORS
RIGHT HAND REVERSE ACTIVE/
LEFT HAND OUTSWING ACTIVE
PAIRS OF DOORS
2
REMARKS
WIDTH HEIGHT
JOB NUMBER
PROJECT
SHEET NUMBER
OF
LOCATION
LOCK
CLOSER
FLUSH BOLTS
HRDWR. SET/ HDG.
GAUGE
SHEET ELEV.
LABEL
HINGE
JAMB DEPTH
OVERALL HEIGHT
ANCHOR
DOOR CONSTR.
DOOR OPENING
DOOR THICK.
SHEET ELEV.
SHEET SECT.
ITEM
QUANTITY
ARCH MARK
FROM
TO
SWING
FRAME CONSTR.
GAUGE
LOCATION
FRAME DATA
DOOR DATA
HARDWARE
Therma-Tru
®
Light Commercial/Multi-Family - Schedule
3
DOOR ELEVATIONS - FLUSH - LITED
DOOR ELEVATIONS - EMBOSSED - OPAQUE
Therma-Tru
®
Light Commercial/Multi-Family - 22-Gauge & 24-Gauge Steel Doors
EXPOSED GLASS
SIZE: 3” x 33”
EXPOSED GLASS
SIZE: 4” x 25”
EXPOSED GLASS
SIZE: 5” x 20”
3”
4”
5”
33”
25”
20”
EXPOSED GLASS
SIZE: 10” x 10”
EXPOSED GLASS
SIZE: 22” x 28”
EXPOSED GLASS
SIZE: 22” x 34”
10”
28”
34”
EQUAL
EQUAL EQUAL EQUALEQUAL
EQUAL
10” 22” 22”
STYLE# 500STYLE# SE978HDSTYLE# SE969HDSTYLE# SE960HDSTYLE# 514STYLE# SE210HD
4
Therma-Tru
®
Light Commercial/Multi-Family - FG Doors
DOOR ELEVATIONS - SMOOTH
DOOR ELEVATIONS - GRAINED
STYLE# FCF160STYLE# FCF140STYLE# FCF100
STYLE# SSF960STYLE# SSF200STYLE# SSF160STYLE# SSF100
5
Therma-Tru
®
Light Commercial/Multi-Family - Standard Hardware Preps.
STEEL DEADBOLT PREP:
STAMPED 1 1/8" x 2 3/4" OPTIONAL
DEADBOLT PREP FOR STEEL FRAMES.
AVAILABLE WITH ADJUSTA-FIT,
ADJUSTA-TRIM, HOLLOW METAL,
SECURA-FIT & VISTA III FRAMES.
STEEL DEADBOLT PREP
STAMPED 1 1/18" x 2 3/4" OPTIONAL
DEADBOLT PREP FOR STEEL FRAMES.
AVAILABLE WITH ADJUSTA-FIT,
ADJUSTA-TRIM, & SECURA-FIT
FRAMES.
STAMPED TEE STRIKE PREP FOR
STEEL FRAMES. AVAILABLE w/
ADJUSTA-FIT, ADJUSTA-TRIM,
HOLLOW METAL & SECURA-FIT
STEEL TEE STRIKE PREP
STAMPED TEE STRIKE PREP FOR STEEL
FRAMES. AVAILABLE WITH ADJUSTA-
FIT, ADJUSTA-TRIM & SECURA-FIT
FRAMES.
STAMPED LIP STRIKE PREP FOR
STEEL FRAMES. AVAILABLE w/
ADJUSTA- FIT, ADJUSTA-TRIM,
SECURA-FIT & VISTA III FRAMES
STEEL LIP STRIKE PREP
STAMPED LIP STRIKE PREP FOR STEEL
FRAMES. AVAILABLE WITH ADJUSTA-
FIT, ADJUSTA-TRIM & SECURA-FIT
FRAMES.
STEEL 4 7/8" ANSI PREP
STAMPED 4 7/8" ANSI STRIKE PREP FOR
S TE E L F R A M E S . AVA IL AB LE w /
ADJUSTA-FIT, ADJUSTA-TRIM, HOLLOW
METAL & SECURA-FIT FRAMES.
STAMPED 4 7/8" ANSI STRIKE PREP
FOR STEEL FRAMES. AVAILABLE
WITH ADJUSTA-FIT, ADJUSTA-TRIM &
SECURA-FIT FRAMES.
1 1/4" x 8" MORTISE LOCK PREP
45 1/4" FR
OM TOP OF DOOR
44 7/8" FR
OM TOP OF DOOR
5 1/2" ST
ANDARD
STANDARD 1 1/8" x 2 1/4" STRIKE w/
OPTIONAL 1 1/8" x 2 1/4" DEADBOLTPREP
* NOTE: MORTISE LOCK
IS NOT OFFERED WITH
LANDMARK DOORS.
LATCH PREPS
STANDARD 1 1/18" x 2 1/4"
STRIKE WITH OPTIONAL
1 1/18" x 2 1/4"DEADBOLT PREP.
1 1/4" x 8" MORTISE LOCK PREP.
NOTE: MORTISE LOCK IS NOT
OFFERED WITH LANDMARK
DOORS.
45 1/4" FROM TOP OF DOOR
44 7/8" FROM TOP OF DOOR
5 1/2" STANDARD
5 1/2" ST
ANDARD
44 7/8" FR
OM TOP OF DOOR
BENCHMARK STEEL ENTRANCE DOOR.
DEADBOLT HOLE: DRILLED
THROUGH WOOD BLOCK.
DEADBOLT FILLER PLATE
DEADBOLT ASSEMBLY
KNOB LATCH
LATCH FILLER PLATE
STANDARD LATCH PREP
44 7/8" FROM TOP OF DOOR
KNOB LATCHLATCH FILLER PLATE
DEADBOLT ASSEMBLY
DEADBOLT FILLER PLATE
DEADBOLT HOLE: DRILLED
THROUGH WOOD BLOCK.
BENCHMARK STEEL ENTRANCE DOOR
5 1/2" STANDARD
Note All dimensions
are typical on both
sides
:
4.080
1.062
.375
.500
1.500
2.500
3.500
3.985
2.040
.097 (12 Ga.)
Drill .295 / .300 Dia.
Countersunk for a
#10 flat head screw
5/8" Rad.
.018
4" x 4" HINGE DETAIL
.097 (12 GA.)
.018
5/8" RAD.
2.040
4.080
DRILL .295/.300 DIA.
COUNTERSUNK FOR A #10
FLAT HEAD SCREW.
NOTE: ALL DIMENSIONS ARE
TYPICAL ON BOTH SIDES.
1.062
.375
.500
1.500
2.500
3.500
3.985
6
Therma-Tru
®
Light Commercial/Multi-Family - Hardware Locations
NOMINAL 2-0 2-4 2-6 2-8 2-10 3-0 3-6
ACTUAL 23 11/16" 27 11/16" 29 11/16" 31 11/16" 33 11/16" 35 11/16" 41 11/16"
NOMINAL 6-8 7-0 8-0
ACTUAL 78 5/8" 82 1/8" 93"
MORTISE PREP 45 1/4" 45 1/4" 59 5/8"
CYLINDRICAL PREP 44 7/8" 44 7/8" 59 1/4"
STANDARD 1 3/4" DOOR, HINGE and CYLINDER LOCK LOCATIONS:
DOOR WIDTH
DOOR HEIGHT
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER OF
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME = 22-GA.
9 7/8”
30”
30”
UNDERCUT OPTIONS:
STANDARD - 1 3/4"
PUBLIC ACCESS - 1 1/8"
NO SILL OPTION - 3/4"
STANDARD STEEL ENTRANCE DOORS
NOMINAL WIDTH (FRAME OPENING)
ACTUAL WIDTH
9 3/4"
6-8
7-0
9 3/4"
YOUR REP. FOR MORE INFO.
2 3/8" OR 2 3/4"
BACKSET (STD.)
5 1/2" DEADBOLT
FLOOR
SQUARE EDGE
CYLINDRICAL LOCK
30"
30"
30"
30"
MORTISE LOCK PREP
1/8"
ACTUAL HEIGHT
NOMINAL HEIGHT (FRAME OPENING)
1 3/4" UNDER
CUT STANDARD
NOTES:
HINGE BACKSET = 5/32"
22 GA. = .027 MIN.
24 GA. = .023 MIN
DOORS UNDER 6-8 OR
OVER 7-0 ARE AVAILABLE.
CONTACT YOUR REP. FOR
MORE INFO.
7
Therma-Tru
®
Light Commercial/Multi-Family - Custom Elevations/Applications
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER OF
8
Therma-Tru
®
Light Commercial/Multi-Family - Adjusta-Fit
®
Frames - Single
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
FRAME DETAIL
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
2-10 = 35" 3-0 = 37" 3-6 = 43"
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
EXISTING WALL
ADJUSTA-FIT CLOSURE JAMB
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
ADJUSTA-FIT FRAME
HINGE JAMB
4" x 4" HINGE
ADJUSTA-FIT FRAME
LATCH JAMB
ADJUSTA-FIT FRAME
A
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME = 22-GA.
9 7/8”
30”
30”
ADJUSTA-FIT FRAMES
2 1/8”
1 13/16”
WALL SIZE
VARIES WITH
2 3/16”
5/8”
KERFED FOR
WEATHERSTRIPPING
ADJUSTA-FIT KERFED FRAME
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
AVAILABLE THRESHOLDS
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-FIT FRAME
SIDE JAMB
9
Therma-Tru
®
Light Commercial/Multi-Family - Adjusta-Fit
®
Frames - Double
FRAME DETAIL
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
4-0 = 49 1/2" 5-0 = 61 1/2" 5-4 = 65 1/2" 6-0 = 73 1/2"
ADJUSTA-FIT FRAME
HINGE JAMB
4" x 4" HINGE
ADJUSTA-FIT FRAME
INACTIVE HINGE JAMB
4" X 4" INACTIVE HINGE
EXISTING WALL
ADJUSTA-FIT CLOSURE JAMB
TYPICAL BOTH SIDES
ALUMINUM ASTRAGAL w/COMPRESSION
WEATHERSTRIPPING
COMPRESSION
WEATHERSTRIPPING
TYPICAL BOTH SIDES
ACTIVE STEEL
ENTRANCE DOOR
INACTIVE
DOOR
Adjusta-Fit
ADJUSTA-FIT FRAMES
2 1/8”
1 13/16”
WALL SIZE
VARIES WITH
2 3/16”
5/8”
KERFED FOR
WEATHERSTRIPPING
4-0 x 6-8
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8 SPRING LOADED
4-0 x 7-0 BALL BEARING
5-0 x 7-0
5-4 x 7-0 4 7/8" ANSI (STD)
6-0 x 7-0 4 7/8" ANSI w/ DEADBOLT
HEIGHT -
NOMINAL
ROUGH
FRAME
OPENING
OPENING
ROUGH
ROUGH OPENING
ROUGH OPENING
OPENING
WIDTH
HEIGHT - STD
HEIGHT -
BARRIER FREE
NO SILL OPTION
49 1/2"
80 3/4"
80 1/8"
79 3/4"
79 3/4"
65 1/2"
80 3/4"
80 1/8"
79 3/4"
61 1/2"
80 3/4"
80 1/8"
79 3/4"
73 1/2"
80 3/4"
80 1/8"
49 1/2"
84 1/4"
83 5/8"
83 1/4"
83 1/4"
65 1/2"
84 1/4"
83 5/8"
83 1/4"
61 1/2"
84 1/4"
83 5/8"
83 1/4"
73 1/2"
84 1/4"
83 5/8"
6 5/8" - 7"
6A
7 1/8" - 7 5/8"
7
5 5/8" - 6"
5A
6 1/8" - 6 5/8"
6
4 5/8" - 5"
4A
5 1/8" - 5 5/8"
5
3 3/4" - 4 1/8"
3A
4 1/8" - 4 5/8"
4
T-STRIKE w/ DEADBOLT
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
T-STRIKE
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
7 5/8" - 8"
7A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
10 1/8" - 10 5/8"
10
ADJUSTA-FIT KERFED FRAME
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
AVAILABLE THRESHOLDS
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-FIT FRAME
SIDE JAMB
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME = 22-GA.
NOMINAL FRAME OPENING WIDTH
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
10
Therma-Tru
®
Light Commercial/Multi-Family - Adjusta-Trim
®
Frames - Single
FRAME DETAIL
EXISTING WALL
ADJUSTA-TRIM CLOSURE JAMB
COMPRESSION
WEATHERSTRIPPING
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
2-10 = 35" 3-0 = 37" 3-6 = 43"
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
WOOD SPACER
ADJUSTA-TRIM FRAME
HINGE JAMB
ADJUSTA-TRIM FRAME
LATCH JAMB
4" x 4" HINGE
ADJUSTA-TRIM FRAME
Adjusta-Trim
HARDWARE LOCATIONS
40 5/16”
“A”
7 1/4”
VARIES
“B” “B”
AVAILABLE THRESHOLDS
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-TRIM CLOSURE
ADJUSTA-TRIM FRAME
STEEL DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-TRIM
FRAME SIDE JAMB
ADJUSTA-TRIM FRAMES
KERFED FOR
WEATHERSTRIPPING
VARIES WITH
WALL SIZE
2 3/16”
1/2”
1/2”
2”
2”
5/8”
5/8”
ADJUSTA-TRIM KERFED FRAME
A COMBINATION OF MAGNETIC AND
CO MPRESSIO N WEATH ERSTRIPP ING
OFFERED ON KERFED FRAME.
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
X X X X
X X X X
2-0 x 6-8 X X
2-4 x 6-8 X X
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X X X X
X X X X
2-0 x 6-8 X X
2-4 x 6-8 X X
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
3-6 x 6-8 4 7/8" ANSI (STD)
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
9A
10
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
7A
8
8A
9
5A
6
6A
7
3A
4
4A
5
10 1/8" - 10 5/8"
4 5/8" - 5"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
5 1/8" - 5 5/8"
5 5/8" - 6"
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3
80 3/4"
T-STRIKE w/ DEADBOLT
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
HEIGHT -
BARRIER FREE
ROUGH OPENING
HEIGHT -
37"
43"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
NO SILL OPTION
29"
31"
33"
35"
35"
43"
37"
25"
25"
29"
31"
33"
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
11
Therma-Tru
®
Light Commercial/Multi-Family - Adjusta-Trim
®
Frames - Double
FRAME DETAIL
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
4-0 = 49" 5-0 = 61" 5-4 = 65" 6-0 = 73"
WOOD SPACER
ADJUSTA-TRIM
FRAME HINGE JAMB
4" x 4" HINGE
ADJUSTA-TRIM FRAME
INACTIVE HINGE JAMB
4" x 4" INACTIVE HINGE
EXISTING WALL
ADJUSTA-TRIM CLOSURE JAMB
TYPICAL BOTH SIDES
ALUMINUM ASTRAGAL w/COMPRESSION
WEATHERSTRIPPING
COMPRESSION
WEATHERSTRIPPING
TYPICAL BOTH SIDES
ACTIVE STEEL
ENTRANCE DOOR
INACTIVE
DOOR
Adjusta-Trim
AVAILABLE THRESHOLDS
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
ADJUSTA-TRIM CLOSURE
ADJUSTA-TRIM FRAME
STEEL DOOR
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 81”
7-0 = 85”
6-8 = 81 1/4”
7-0 = 85 1/4”
ADJUSTA-TRIM
FRAME SIDE JAMB
ADJUSTA-TRIM FRAMES
KERFED FOR
WEATHERSTRIPPING
VARIES WITH
WALL SIZE
2 3/16”
1/2”
1/2”
2”
2”
5/8”
5/8”
ADJUSTA-TRIM KERFED FRAME
A COMBINATION OF MAGNETIC AND
CO MPRESSIO N WEATH ERSTRIPP ING
OFFERED ON KERFED FRAME.
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME = 22-GA.
NOMINAL FRAME OPENING WIDTH
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
X X X X
X X X X
2-0 x 6-8 X X
2-4 x 6-8 X X
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X X X X
X X X X
4-0 x 6-8 X X
5-0 x 6-8 X X
5-4 x 6-8
6-0 x 6-8
4-0 x 7-0
5-0 x 7-0
5-4 x 7-0
6-0 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
Spring Loaded
WALL SIZE
CLOSURE MODEL
Frost Break Outswing: FBO
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
"C" Rating 3/4 Hour
Frost Break Inswing: FBI
4 7/8" ANSI w/ Opt. Deadbolt
Ball Bearing
No Rating
Barrier Free
Compression
T-Strike w/ Opt. Deadbolt
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
"B" Rating 1 1/2 Hour
THRESHOLDS
WEATHERSTRIPPING
STRIKE PREPS
84 1/4"
83 5/8"
83 1/4"
65 1/2"
84 1/4"
83 5/8"
83 1/4"
61 1/2"
83 1/4"
73 1/2"
61 1/2"
79 3/4"
73 1/2"
84 1/4"
49 1/2"
84 1/4"
83 1/4"
65 1/2"
80 3/4"
80 1/8"
79 3/4"
NO SILL OPTION
79 3/4"
80 3/4"
80 1/8"
79 3/4"
80 1/8"
80 3/4"
80 1/8"
BARRIER FREE
OPENING
WIDTH
HEIGHT - STD
49 1/2"
80 3/4"
ROUGH
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
83 5/8"
83 5/8"
X X X X
X X X X
2-0 x 6-8 X X
2-4 x 6-8 X X
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
10 1/8" - 10 5/8"
10
9 1/8" - 9 5/8"
9
9 5/8" - 10"
9A
8 1/8" 8 5/8"
8
8 5/8" - 9"
8A
7 1/8" - 7 5/8"
7
7 5/8" - 8"
7A
6 1/8" - 6 5/8"
6
6 5/8" - 7"
6A
5 1/8" - 5 5/8"
5
5 5/8" - 6"
5A
4 1/8" - 4 5/8"
4
4 5/8" - 5"
4A
WALL SIZE
CLOSURE MODEL
OPENING
WIDTH
43"
35"
ROUGH OPENING
ROUGH OPENING
FRAME
OPENING
OPENING
HEIGHT -
HEIGHT -
NOMINAL
ROUGH
ROUGH
BARRIER FREE
NO SILL OPTION
25"
80 3/4"
80 1/8"
79 3/4"
HEIGHT - STD
79 3/4"
31"
80 3/4"
80 1/8"
79 3/4"
29"
80 3/4"
80 1/8"
79 3/4"
35"
80 3/4"
80 1/8"
79 3/4"
33"
80 3/4"
80 1/8"
79 3/4"
43"
80 3/4"
80 1/8"
79 3/4"
37"
80 3/4"
80 1/8"
83 5/8"
83 1/4"
29"
84 1/4"
83 5/8"
83 1/4"
25"
84 1/4"
83 5/8"
37"
84 1/4"
83 5/8"
83 1/4"
33"
84 1/4"
83 5/8"
83 1/4"
31"
84 1/4"
83 1/4"
83 1/4"
84 1/4"
83 5/8"
83 1/4"
84 1/4"
83 5/8"
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Compression
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Lip Strike w/ Opt. Deadbolt
Removable Pin
THRESHOLDS
WEATHERSTRIPPING
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
Non-Removable Pin
Ball Bearing
Spring Loaded
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
12
Therma-Tru
®
Light Commercial/Multi-Family - Secura-Fit
®
Frames - Single
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
2-0 x 7-0 T-STRIKE (STD)
2-4 x 7-0 T-STRIKE w/ DEADBOLT
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
JOB NUMBER
PROJECT
LOCATION
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
24" - 24 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
79 7/8" - 80 1/4"
30" - 30 1/4"
79 7/8" - 80 1/4"
32" - 32 1/4"
79 7/8" - 80 1/4"
34" - 34 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
83 7/8" - 84"
36" - 36 1/4"
79 7/8" - 80 1/4"
24" - 24 1/4"
83 7/8" - 84"
30" - 30 1/4"
83 7/8" - 84"
32" - 32 1/4"
83 7/8" - 84"
34" - 34 1/4"
83 7/8" - 84"
36" - 36 1/4"
83 7/8" - 84"
4 7/8" ANSI w/ DEADBOLT
SHEET NUMBER OF
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8 SPRING LOADED
2-10 x 6-8 BALL BEARING
3-0 x 6-8
2-0 x 7-0 T-STRIKE (STD)
2-4 x 7-0 T-STRIKE w/ DEADBOLT
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
JOB NUMBER
PROJECT
LOCATION
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
24" - 24 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
79 7/8" - 80 1/4"
30" - 30 1/4"
79 7/8" - 80 1/4"
32" - 32 1/4"
79 7/8" - 80 1/4"
34" - 34 1/4"
79 7/8" - 80 1/4"
28" - 28 1/4"
83 7/8" - 84"
36" - 36 1/4"
79 7/8" - 80 1/4"
24" - 24 1/4"
83 7/8" - 84"
30" - 30 1/4"
83 7/8" - 84"
32" - 32 1/4"
83 7/8" - 84"
34" - 34 1/4"
83 7/8" - 84"
36" - 36 1/4"
83 7/8" - 84"
4 7/8" ANSI w/ DEADBOLT
SHEET NUMBER OF
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
> = GREATER THAN
MORTISED FOR
4 1/2” x 4 1/2” x
.134" HINGES (3)
6-0 - 6-6
72” TO 78”
>6-6 - 6-10
> 78” - 82”
>6-10 - 7-2
> 82” - 86”
STRIKE LOCATION
NOMINAL FRAME OPENING HEIGHT
STANDARD
ANSI 115.3
2 3/4" STRIKE
OPTIONAL:
(1) ANSI 115.1 - 4 7/8"
(2) DEADBOLT 1 1/8" x 2 3/4"
(3) BLANK
NOTE:
SECURA-FIT FRAME = 16-GA.
7 1/4”
30 1/4”
30 1/4”
VARIES
32 1/4”
32 1/4”
VARIES
25 1/2”
25 1/2”
VARIES
7 1/4”
7 1/4”
FRAME DETAIL
2-6 = 29 1/4” 2-8 = 31 1/4” 2-10 = 33 1/4”
2-6 = 30” - 30 1/4” 2-8 = 32” - 32 1/4” 2-10 = 34” - 34 1/4”
3-0 = 35 1/4” 3-6 = 41 1/4”
3-0 = 36” = 36 1/4” 3-6 = 42” - 42 1/4”
EXISTING WALL
WOOD DOOR STOP, INCLUDED
w/ SECURA-FIT FRAME
STEEL DOOR
SECURA-FIT FRAME
HINGE JAMB
4 1/2” x 4 1/2”
HINGE
SECURA-FIT FRAME
LATCH JAMB
COMPRESSION
WEATHERSTRIPPING
MAGNETIC
WEATHERSTRIPPING
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER OF
AVAILABLE THRESHOLDS
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
WOOD DOOR STOP,
INCLUDED w/ SECURA-FIT
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 79 5/8”
7-0 = 83 5/8”
6-8 = 79 7/8” - 80 1/4” 7-0 = 83 7/8” - 84”
SECURA-FIT FRAME
SIDE JAMB
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
MAGNETIC WEATHERSTRIPPING
13
Therma-Tru
®
Light Commercial/Multi-Family - Secura-Fit
®
Frames - Double
4-0 x 6-8
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8 SPRING LOADED
4-0 x 7-0 BALL BEARING
5-0 x 7-0
5-0 x 7-0 T-STRIKE (STD)
6-0 x 7-0 T-STRIKE w/ DEADBOLT
JOB NUMBER
PROJECT
LOCATION
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
47 3/4" - 48"
79 7/8" - 80 1/4"
71 3/4" - 72"
79 7/8" - 80 1/4"
59 3/4" - 60"
79 7/8" - 80 1/4"
63 3/4" - 64"
79 7/8" - 80 1/4"
63 3/4" - 64"
83 7/8" - 84"
47 3/4" - 48"
83 7/8" - 84"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
4 7/8" ANSI w/ DEADBOLT
SHEET NUMBER OF
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
71 3/4" - 72"
83 7/8" - 84"
59 3/4" - 60"
83 7/8" - 84"
4-0 x 6-8
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8 SPRING LOADED
4-0 x 7-0 BALL BEARING
5-0 x 7-0
5-0 x 7-0 T-STRIKE (STD)
6-0 x 7-0 T-STRIKE w/ DEADBOLT
JOB NUMBER
PROJECT
LOCATION
NOMINAL
ROUGH
ROUGH
FRAME
OPENING
OPENING
OPENING
WIDTH
HEIGHT
47 3/4" - 48"
79 7/8" - 80 1/4"
71 3/4" - 72"
79 7/8" - 80 1/4"
59 3/4" - 60"
79 7/8" - 80 1/4"
63 3/4" - 64"
79 7/8" - 80 1/4"
63 3/4" - 64"
83 7/8" - 84"
47 3/4" - 48"
83 7/8" - 84"
THRESHOLDS
TWO PIECE
BARRIER FREE
HINGES
4 7/8" ANSI w/ DEADBOLT
SHEET NUMBER OF
REMOVABLE PIN
NON-REMOVABLE PIN
LATCH PREPS
4 7/8" ANSI
71 3/4" - 72"
83 7/8" - 84"
59 3/4" - 60"
83 7/8" - 84"
EXISTING WALL
WOOD DOOR STOP w/ COMPRESSION
WEATHERSTRIPPING, INCLUDED w/
SECURA-FIT FRAME. TYPICAL BOTH
HINGE JAMBS
ACTIVE STEEL
ENTRANCE DOOR
ALUMINUM ASTRAGAL w/
COMPRESSION WEATHERSTRIPPING
SECURA-FIT FRAME
INACTIVE HINGE JAMB
SECURA-FIT FRAME
INACTIVE HINGE JAMB
4" x 4" INACTIVE HINGE
5-0 = 59 1/32" 5-4 = 63 1/32" 6-0 = 71 1/32"
5-0 = 59 3/4" - 60" 5-4 = 63 3/4" - 64" 6-0 = 71 3/4" - 72"
4" x 4" HINGE
INACTIVE
DOOR
Secura-Fit
FRAME DETAIL
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER OF
AVAILABLE THRESHOLDS
EXISTING WALL
MAGNETIC WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
WOOD DOOR STOP,
INCLUDED w/ SECURA-FIT
1 3/4”
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
6-8 = 79 5/8”
7-0 = 83 5/8”
6-8 = 79 7/8” - 80 1/4” 7-0 = 83 7/8” - 84”
SECURA-FIT FRAME
SIDE JAMB
ADJUSTABLE SWEEP
STEEL ENTRANCE DOOR
BARRIER FREE THRESHOLD:
OPTIONAL
1 1/8"
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
MAGNETIC WEATHERSTRIPPING
HARDWARE LOCATIONS
NOMINAL FRAME OPENING WIDTH
STRIKE LOCA
TION
NOMINAL FRAME OPENING HEIGHT
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME = 22-GA.
NOMINAL FRAME OPENING WIDTH
9 7/8”
30”
30”
NOMINAL FRAME OPENING WIDTH
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Therma-Tru Light Commercial Doors and Frames User manual
- Type
- User manual
Therma-Tru Light Commercial Doors and Frames are designed for heavy-duty use in commercial and multi-family buildings. They are fabricated from high-quality materials and offer a variety of features to meet the specific needs of your project.
Features:
- Durable construction: Frames are made of 16-gauge steel, while doors are made of 22-gauge or 24-gauge steel.
- Reinforced for surface-mounted hardware: Doors and frames can be reinforced for surface-mounted hardware, such as panic exit devices and deadbolts.
- Adjustable: Adjusta-Fit frames can be adjusted to fit a variety of wall sizes, making them ideal for new construction or renovation projects.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Therma-Tru Light Commercial/Multi-Family / 22 & 24 Gauge Steel Edged Door User manual
-
Therma-Tru Hinged Patio Door System Single Panel Assembly Unit User manual
-
Therma-Tru Light Commercial Door none User manual
-
Therma-Tru Light Commercial Pre-Hung User manual
-
Therma-Tru Fiber-Classic User manual
-
Therma-Tru Pre-hung Door Systems User manual
-
Therma-Tru Double-Door User manual
Other documents
-
HealthSmart 640-2006-0000 Operating instructions
-
Gatehouse 33069ZCXLG Installation guide
-
-
Armor Door VSDFPEX3680EL Operating instructions
-
M-D Building Products 43846 Operating instructions
-
MD Building Products 02576 Installation guide
-
Frost King DS7W/25 Installation guide
-
Barton Kramer 1802 Installation guide
-
Unique Home Designs 1S2026CN2WHP5A Installation guide
-
Endura Ultimate Flip Lever Astragal Operating instructions
