Installing the Cell Phone Adapter
The Style CPA-110 Cell Phone Adapter lets you connect Motorola MicroTAC™,
MicroTAC™ II, PL 550/950, or Slim Lite phones
to your boat’s cellular antenna.
Shakespeare Electronic Products Group · Marine Products
6111 Shakespeare Rd., Columbia, SC 29223 · 803-227-1590 · Fax: 803-419-3099
www.shakespeare-marine.com
©1998 Shakespeare Co.
Supplied Parts
1 Antenna adapter cable
1 Replacement black cap
1 Replacement flex antenna
Installation Instructions
1. Extend the cell phone’s retractable antenna as far as it will go.
2. Unsnap the antenna’s black base cap at its base with a thin
bladed screwdriver. See picture #1.
3. Pull the coil assembly out of its socket and slide it away from
the phone along the antenna.
4. Unscrew the antenna from the
phone by twisting it counter-
clockwise. See picture #2.
5. Snap the (supplied) black replacement
flexible antenna into place in the phone’s
antenna socket. The small metal connector
at its base should point toward the back of
the cell phone. See picture #3.
6. Snap the supplied replacement black cap into
position. See picture #4.
7. Connect the adapter cable to your ship’s antenna,
and plug the other end into the connection at the
base of the replacement antenna.
1
2
4
5
3
· Form I-CPA-110 J: rev. 12-9-2006
-
1
Shakespeare Electronic CPA-110 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Shakespeare Electronic Phase III Style 6237 Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Motorola MicroTAC Lite II User manual
-
Shakespeare 4351 User guide
-
-
-
-
-
-
Sirius Satellite Radio SRA-40 User manual
-
-