MM 2100
Rearview Mirror with integrated
4“ Colour TFT Display
Rearview Mirror with integrated 4'' Colour TFT-Display
Integrated Loudspeaker and IR Receiver
PAL/NTSC capable (auto detection)
Power On/Off button with LED
Manual Brightness- and Volume Control
Non-detachable 7 m connection cable to Navigation Computer
(ending on Mitsumi Connector); no additional cable needed!
Mounting straps for simple and safe fixing on vehicle's
rearview mirror
Optical coating for homogeneous mirror surface
Connection of rearview camera possible via optional
adapter cable CA 1205
Auto-switch to camera image when reverse gear activated
VDO Dayton. The Car Brand.
Car Multimedia Systems.
Technical Data MM 2100
• Display size: 4''
• Aspect ratio: 4:3
• Resolution: 480(H) x 234(V) Delta type
• Brightness: 250 cd/cm
2
• Contrast ratio: 150:1
•View angle: 90°(H), 40°(W)
• Input voltage: 12 V DC
• Power consumption: max. 8 W
• Mirror dimensions (WxHxD): 275 x 96 x 23,5 mm
•Weight of mirror incl. mounting straps (w/o cable): 325 g
Package Content
• Rearview mirror with integrated 4'' TFT-Display and 7m cable
• Mounting straps (3 pairs)
• Installation- and operation manual (GB, FR, DE, NL, IT, DK, ES)
• Remote Control RC 5400
02/05, MM 2100,
subject to modification
MM 2100
Rearview Mirror with integrated 4“ Colour TFT-Display
VDO Dayton. The Car Brand.
Car Multimedia Systems.
www.vdodayton.com
Application
MM 2100 is a rearview mirror, which includes a 4'' TFT-Monitor to
display the image of a connected Navigation Computer (PC54xx and
higher).
Navigation Display
All information is clearly visible on the unit's 4:3 TFT-Screen. It’s position
close to the driver's eye supports the usage of a smaller display.
Brightness and Volume of the Navigation Guidance can be adjusted
manually for the most convenient setting.
Installation
Simply by connecting the 7m cable to the Navigation Computer and
fixing the MM 2100 over the vehicle's rearview mirror, the full featured
Colour Navigation System is ready for use - no dashboard damage, no
additional cables and / or accessories required!
Integration & Anti-Theft Protection
MM 2100 is perfectly integrated into the car-interior since it does not
occupy any space in the dashboard-area. An important side-effect: The
unit is hardly visible from outside the car and therefore does not attract
unwanted attention.
Full-Automatic Power-Supply
The display of MM 2100 is powered by the Navigation Computer which
makes additional cables unnecessary. Of course, the display can be
switched off manually if needed.
Note:
For optimal usage of MM 2100, the following selections should be activated in the
Settings-Menu of the Navigation-Computer:
• “4:3 Monitor“
• “Sync in Green“
In case of questions, please contact your dealer.
/