Yamaha M7CL Reference guide

Brand: Yamaha

Model: M7CL

Type: Reference guide

Yamaha M7CL is a powerful and versatile digital mixing console that is ideal for a wide range of live sound applications. With its intuitive user interface, advanced features, and exceptional sound quality, the M7CL is a great choice for professional audio engineers and musicians alike.

Some of the key features of the Yamaha M7CL include:

32 channels with 8 DCA groups and 8 mute groups
16 mix buses with 8 matrix buses
4 stereo effects processors
Integrated USB recording and playback
Dante digital audio networking
Remote control via iPad or iPhone

The M7CL is a great choice for a wide range of live sound applications, including:

Some of the key features of the Yamaha M7CL include:

32 channels with 8 DCA groups and 8 mute groups
16 mix buses with 8 matrix buses
4 stereo effects processors
Integrated USB recording and playback
Dante digital audio networking
Remote control via iPad or iPhone

The M7CL is a great choice for a wide range of live sound applications, including:

Caution on connecting M7CL console and M7CL Editor via LAN

When you connect the M7CL console and a computer running M7CL Editor via Local Area Network

(LAN), such as office buildings or school campuses, please be careful with the following while

consulting with your network administrator.

■ Since the M7CL console does not support DHCP, set the IP address manually. Please ensure

that you do not have a duplicate IP address assignment on the same network..

■ Please note that the following IP addresses cannot be used regardless of the subnet mask

setting.

Within a range of Class A (0.0.0.0～127.255.255.255), the second, third and forth octet are the

following number.

xxx.000.000.000

xxx.255.255.255

Within a range of Class B (128.0.0.0～191.255.255.255), the third and forth octet are the

following number.

xxx.xxx.000.000

xxx.xxx.255.255

Within a range of Class C (192.0.0.0～223.255.255.255), the forth octet are the following

number.

xxx.xxx.xxx.000

xxx.xxx.xxx.255

■ When a sufficient bandwidth for the communication between the M7CL console and M7CL

editor cannot be secured due to the network load increase, the M7CL console or M7CL Editor

response may become slow. It is recommended to use a network with a transmission rate of

100Mbps or more.

■ Rough indications of the communication load between the M7CL console and M7CL Editor are

as follows:

・ While performing synchronization process between the M7CL console and M7CL Editor, a

communication load of approximately 250 kbps occurs.

・ When the M7CL console and M7CL Editor are connected online, a maximum

communication of meter data causes approximately 350 kbps load. When disabling the

Level Meter from the System Setup screen of the M7CL Editor, constant communication

load will reduce to approximately 5 kbps.

■ If your LAN encounters illegal data that contains a computer virus, this may cause the M7CL

console or M7CL Editor to malfunction unexpectedly.

If you are concerned about the conditions above, a dedicated network or separate network using a

VLAN can be established in order to make the communication between M7CL and M7CL Editor

more stable.

Yamaha M7CL Reference guide

Brand: Yamaha

Model: M7CL

Type: Reference guide

Some of the key features of the Yamaha M7CL include:

32 channels with 8 DCA groups and 8 mute groups
16 mix buses with 8 matrix buses
4 stereo effects processors
Integrated USB recording and playback
Dante digital audio networking
Remote control via iPad or iPhone

The M7CL is a great choice for a wide range of live sound applications, including:

Download PDF

report

Yamaha M7CL Reference guide

Yamaha M7CL Reference guide

Related papers

Other documents