Whirlpool HW 400 IK User guide

5019 618 33083/A

Betriebs- und Wartungshandbuch

Enthält auch Anweisungen und Vorschriften für die sichere Installation

Lesen Sie die vorliegenden Anweisungen und das beiliegende Installationshandbuch vor der

Installation oder dem Gebrauch der Abzugshaube aufmerksam durch und befolgen Sie sie.

User and Maintenance Handbook

Also contains instructions and regulations for safe installation

Before installing or using the hood, carefully read and follow the instructions given in this

handbook and in the enclosed installation handbook.

Manuel d’utilisation et d’entretien

Contient également les instructions et prescriptions pour une installation sûre

Avant de monter ou d’utiliser la hotte, lire et suivre attentivement les instructions

reportées dans ce manuel et dans le manuel d’instructions en annexe.

Gebruiks- en onderhoudsboekje

Bevat ook aanwijzingen en voorschriften voor een veilige installatie

Lees de aanwijzingen in deze handleiding en in het bijgevoegde installatieboekje door en

volg ze nauwgezet op, alvorens de wasemkap te installeren of te gebruiken.

Manual de uso y mantenimiento

Contiene información e instrucciones para efectuar una instalación segura

Antes de instalar o utilizar la campana, lea y siga atentamente las instrucciones de este

manual y del manual de instrucciones adjunto.

Manual de Instruções e de Manutenção

Contém também as istruções e as indicações para uma instalação segura

Antes de instalar ou utilizar o exaustor leia e siga com atenção as seguintes instruções contidas

no presente manual, e no manual de instruções para a instalação fornecido em anexo.

Libretto di Uso e Manutenzione

Contiene anche istruzioni e prescrizioni per una sicura installazione

Prima di installare o utilizzare la cappa, leggete e seguite attentamente le istruzioni

riportate in questo libretto e nel libretto di installazione allegato.

Εγχειρίδιο Χρήσης και Συντήρησης

Περιέχει επίσης οδηγίες για μια ασφαλή εγκατάσταση

Πριν από την εγκατάσταση ή χρήση του απορροφητήρα, διαβάστε και ακολουθήστε προσεκτικά τις

οδηγίες που αναγράφονται στο παρόν εγχειρίδιο και στο εγχειρίδιο εγκατάστασης που επισυνάπτεται.

Manual för Användning och Underhåll

Innehåller även instruktioner för hur du gör en säker installation

Innan du installerar eller använder fläktkåpan, läs och följ noggrant instruktionerna i den

här manualen och i bifogad installationsmanual.

Bruks- og vedlikeholdsveiledning

Inneholder også instrukser og forholdsregler for sikker installasjon

Før installasjon og bruk av ventilatoren må du lese denne bruksveiledningen og vedlagte

installasjonsveiledning nøye og følge alle instruksene som gis.

Bruger- og vedligeholdelsesvejledning

Indeholder også anvisninger i og foreskrivelser for sikker installation

Inden montering og brug af emhætten skal anvisningerne i denne vejledning samt i den

medfølgende installationsvejledning læses og følges nøje.

Käyttö- ja huolto-ohjeet

Sisältää myös ohjeet ja määräykset turvallista asennusta varten

Lue tämän ohjekirjan sekä oheisen asennusoppaan ohjeet huolellisesti ennen

liesituulettimen asentamista tai käyttämistä.

D

GB

F

NL

E

P

I

GR

S

N

DK

FIN

Page is loading ...

5019 618 33083/A

SAFEGUARDING THE ENVIRONMENT

1. Packing

Packing materials are 100% recyclable and are marked with

the recycling symbol .Comply with the local regulations for

disposal. The packing materials (plastic bags, polystyrene,

etc.) are a potential source of danger and must be kept out of

the reach of children.

2. Product

This appliance is marked in compliance with European

Directive 2002/96/EC, Waste Electrical and Electronic

Equipment (WEEE).

By ensuring that this appliance is correctly scrapped, the user

can help prevent potentially harmful consequences for the

environment and the health of people.

The symbol on the product or the accompanying

documentation indicates that this product should not be treated

as domestic waste but must be taken to a suitable collection

centre for the recycling of electrical and electronic equipment.

Disposal must be carried out in compliance with local

regulations on waste disposal.

For further information on the treatment, recovery and

recycling of this product, contact the competent local office,

the household waste collection service or the shop where

you purchased the appliance.

IMPORTANT INSTRUCTIONS FOR

SAFETY

WARNING: To reduce the risk of accidents, electric

shock, injury or damage, when using the hood comply with

the basic precautions, including the following.

1. Always disconnect the hood from the power supply

before carrying out any installation or maintenance

operation on the appliance.

2. Installation must be carried out by a specialised

technician, in compliance with the manufacturer’s

instructions and local safety regulations.

3. Earthing of the appliance is compulsory. (Not possible for

Class II hoods).

4. Never use multisockets and extension leads.

5. The electrical components must no longer be accessible

to the user after installation.

6. Do not touch the hood with wet parts of the body or use

it when barefoot.

7. Do not pull the appliance power cable to unplug it.

8. After-sales service – do not repair or replace any part of

the hood unless specifically indicated in the manual. All

other maintenance services must be carried out by a

specialised technician.

9. When drilling the wall, make sure not to damage the

electrical connections and/or pipes.

10. The ventilation ducts must always discharge to the

outside.

11. The Manufacturer declines any liability for improper use

or incorrect setting of the controls.

12. The appliance is not intended for use by children or

persons with limited physical, sensory or mental abilities

or without experience and knowledge of it, unless they

are under the supervision of or instructed in its use by a

person responsible for their safety.

13. Keep children away.

14. To reduce the risk of fire, only use a metal inlet duct.

15. Children must be supervised so that they do not play

with the appliance.

16. The product must be disposed of in compliance with

local regulations on waste disposal.

17. For further information on the treatment, recovery and

recycling of this product, contact the competent local

office, the household waste collection service or the shop

where you purchased the appliance.

18. Regular cleaning and maintenance is essential for correct

hood operation and good performance. Frequently clean

all encrustations from dirty surfaces to prevent the

accumulation of grease. Regularly clean or replace filters.

19. Do not “flambé” food under the hood. Naked flames

could cause a fire.

20. The room must have adequate ventilation when the hood

is used at the same time as appliances operating on gas or

other fuels.

21. The discharge air must not be eliminated in a duct used

to remove fumes produced by appliances operating on

gas or other fuels, but must have a separate outlet. All the

national regulations on air discharge envisaged by art.

7.12.1 of CEI EN 60335-2-31 must be observed.

22. If the hood is used together with other appliances

operating on gas or other fuels, the negative pressure in

the room must not exceed 4 Pa (4 x 10

-5

bar). Therefore,

make sure the room is adequately ventilated.

23. Do not leave pans unattended when frying, since the

cooking oil could catch fire.

24. Make sure the lamps are cold before touching them.

25. The hood is not a shelf, therefore do not overload or

place objects on it.

26. Do not use or leave the hood without its lamps correctly

installed - risk of electric shock.

27. Wear work gloves for all installation and maintenance

operations.

28. The product is not suitable for outdoor use.

29. The air sucked by the hood must not be eliminated

through the same flue of the heating system or other

appliances using gas or other fuels.

IFINNL P GR

E

S

N

DK

D

F

GB

CZ SK H

PL

RUS

BG

RO

5019 618 33083/A

Electrical connection

The mains voltage must match that given on the rating plate

located inside the hood. If provided with a plug, connect the

hood to a socket complying with the current regulations and

located in an accessible area. If it does not have a plug (direct

connection to the power supply) or if the plug is not in an

accessible place, fit a suitable double-pole switch that ensures

complete disconnection from the power supply in category III

overvoltage conditions, complying with the installation rules.

WARNING: Before reconnecting the hood circuit to the

power supply and checking correct operation, always make

sure the power cable is correctly fitted and that it was NOT

crushed in its housing during installation. Make sure to have

this operation carried out by a specialised technician.

Cleaning the hood

WARNING: Failure to remove oil/grease (at least once a

month) could result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for

future reference, in order to ensure best use of your hood.

The packing materials (plastic bags, polystyrene, etc.) are a

potential source of danger and must be kept out of the reach

of children.

Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and put on

the market in conformity with:

- safety objectives of the “Low Voltage” Directive

2006/95/EC (which replaces 73/23/EEC as amended)

- protection requirements of “EMC” Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

If the hood does not work:

• Is the plug properly inserted in the power socket?

• Is there a power failure?

If the hood is not extracting enough:

• Is the right speed selected?

• Do the filters need cleaning or replacing?

• Are the air outlets blocked?

If the lamp does not work:

• Does the lamp need replacing?

• Is the lamp correctly fitted?

AFTER-SALES SERVICE

Before calling the After-Sales Service

1. Check to see if you can fix the problem yourself

(see “Troubleshooting Guide”).

2. Switch the appliance off and then on again to check if the

problem has been eliminated.

3. If the problem persists, contact the After-Sales Service.

Specify:

• the type of fault,

• the product model given on the dataplate inside the

hood, visible on removing the grease filters,

• your full address,

• your telephone number and area code,

• the Service code (the number under the word SERVICE

on the dataplate inside the hood, behind the grease

filter).

If any repairs are necessary, contact an authorised Service

Centre (to ensure the use of original spare parts and correct

repair).

Failure to comply with these instructions can compromise

the safety and quality of the product.

IFINNL P GR

E

S

N

DK

D

F

GB

CZ SK H

PL

RUS

BG

RO

5019 618 33083/A

The hood is designed for use in “Extractor version” or in

“Filter version”

Extractor Version

(see symbol in installation handbook)

fumes are extracted and expelled to the outside through a

fumes exhaust hose (not supplied) fixed to the collar at the top

of the hood.

In accordance with the exhaust hose purchased, provide a

suitable fixing system to secure it to the collar.

Warning: If already installed, remove the carbon filter/s.

Filter Hood

(see symbol in installation handbook)

Air is filtered through a carbon filter/s and recycled into the

surrounding environment.

Warning: check that air recirculation is facilitated (to this end,

carefully follow the instructions given in the installation

handbook)

Warning! If the hood does not have a carbon filter/s, order

one/them and fit it/them before use.

The hood comes provided with hardware (e.g.: screws and/or

plugs) suitable for most walls/ceilings. However, a qualified

technician is needed to make sure that such hardware is

suitable for your wall/ceiling. The wall/ceiling must be strong

enough to take the weight of the hood.

Extremely heavy product; hood handling and

installation must be carried out by two or more

persons.

DESCRIPTION OF THE HOOD

1. Control panel.

Light :

move the button to the right.

Extraction speed :

move the button to the right to increase power/speed.

2. Grease filters.

3. Lamp covers(or halogen lamps, depending on the

model).

4. Telescopic flue.

Grease filters:

Metal grease filters have an unlimited

life and should be washed once a

month either by hand or in a

dishwasher at a low temperature and

with a short cycle. Washing in a

dishwasher can cause grease filters to

turn white, but this in no way affects

efficiency.

a. Press the handle to release the filter

b. remove the filter.

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

Bulb/s:

Remove the filters and remove the

burnt-out bulb.

Refit the filters.

Halogen bulbs:

Use a small screwdriver or other

suitable tool to prise off the cover.

Snap-fit the cover back on.

Use only max 40 W max - E14

bulbs or max 12V-20W- G4 halogen bulbs (depending

on the model), taking care not to touch them with

your hands.

Fitting or replacing the carbon filter (filter hoods only).

Change the carbon filter every four months.

1. Remove the grease filters.

2. Fit the filter/s over the motor according to the model:

•align the pins R on the cowl with the slots S, then

turn the filter clockwise until it locks in place.

3. Reverse the above procedure to remove the carbon

filter.

4. Refit the grease filters.

Cleaning the hood

Warning! Failure to remove oil and grease (at least once a

month) could lead to fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

4

2

3

1

a

b

IFINNL P GR

E

S

N

DK

D

F

GB

CZ SK H

PL

RUS

BG

RO

Page is loading ...

Whirlpool HW 400 IK User guide

Whirlpool HW 400 IK User guide

in other languages

Related papers

Other documents