HQ RC UNIVERS30 Specification

Pannel description

Power

Channel +

Volume -

Channel -

Indicator

Light

Volume +

Mute

Type Selection

TV/AV

Channel

select

Set

Telescan

Function

F.REW

F.F.

Video

Stop

Play

Pause

CH*P/C

2/12

0/10

1/11

Nicam

Introduction to the product

Slide open the battery

compartment and insert two

size AA batteries (not

supplied). Be sure to line up

the+ and- on the batteries

with the + and - on the

battery compartment.

Characteristics:

It can be used in most parts of the world.

It can control most brands of devices that are commonly used in the world.

Easy programming by auto-search or manual search.

Easy operating with an indicator light on the controller.

Installing the batteries

NOTE

Notes on the batteries

Under normal conditions. batteries will last up to twelve months.

If the controller does not operate properly, the batteries might

be worn out.

Do not mix old batteries with new ones or mix different types of

batteries together.

If the electrolyte inside the battery compartment should leak,

wipe the contaminated area of the battery compartment with

a cloth and replace the old batteries with new ones. To prevent

electrolyte from leaking

Your wise selection of our product is deeply appreciated. RC-Univers is

the latest type of the Multi-function Remote Controller . By simple setting of

this Remote Controller, most household electronic appliances, such as TV,

VCR, SAT, DSS, HIFI, CABLE, CD, VCD, can be easily controlled.

Please follow the SETTING STEPS to set Remote Controller so

as to control your electronic appliances effectively.

CH*P/C

GB GB

Brand/Device

TV/TXT

AB

ABC

ACE

Admiral

AEON

0713

0032,0155

ACE0713

1.Power on the device you want to control.

2.Aim the controller at the device, press the corresponding device button and

press a button to check if that button works.

Fox example: press the power button to see if it can turn off the device.

3.Check that the other buttons of the controller is operating the corresponding

functions of the device.

4.If the controller does not work, please check the code and brand again and

repeat programming again.

5.If the controller still does not work please try other codes listed for you.

Programming the controller

Checking if the code number works

6 Check whether operation of other

buttons is at normal state. If so,

your setting is successfully

accomplished.

1 See the code form and find the

4-digit figures for your device.

2 Press set button continuously,

Then press the device button

you want to control.

4 Enter the 4-digit figure you

have found.

3 When the indicator light is

on, release the two buttons

simultaneously.

5 When the indicator light goes

out, programming is finished.

Manual programming

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

?

TXT

TV

1

2/12

0/10

1/11

CH*P/C

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

Light goes out

2 Press the button of set, at the same

time press the button of type selection.

1 Turn on the controlled electronic appliance,

and hold the Remote Controller to aim at

the receiving point of the appliance.

4 Press the button of set again, the

Indicator Light will be flashing, and

the Remote Controller begins to

search automatically.

3 When the Indicator Light is on, do not

press the above two buttons.

6 Check whether operation of other

buttons is at normal state. If so,

your setting is successfully

accomplished..

Automatic Code Searching

If your electronic appliances are not included in the code list,

please try the mode of automatic code searching.

(In searching, if you can turn off the

controlled appliance, the searching will

be ended in 2 seconds according to

your selection of types).

C

H

+

C

H

-

V

O

L

-

VO

L

+

1

2

3

4

5

6

7

8

9

T

V

C

R

C

B

L

/

S

A

T

A

U

X

M

U

T

E

T

V

/

A

V

?

T

X

T

V

1

2/

1

2

0/

1

0

1/

1

C

H

*

P

/

C

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

CH+

CH-

VOL-

VOL+

1

3

4

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

2

5

6

Every two

seconds

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

?

TXT

TV

1

2/12

0/10

1/11

CH*P/C

CH+

CH-

VOL-

VOL+

1

2

3

4

5

6

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

Flashing

5 Then every two seconds press power

(each press will bring about different

codes)

GB GB

CH+

CH-

VOL-

VOL+

1

3

4

7

8

9

TV

VCR

CBL /SAT

AUX

MUTE

TV/AV

CH*P/C

2/12

0/10

1/11

2

5

6

If you have problems in programming or using the controller:

When programming the controller, carefully go through

the procedures described above. If the code listed first

for your device does not work, try all the codes for your

device in the order in which they are listed.

Check that you are aiming the controller directly at the

device and that there are no obstructions between the

device and controller.

Check that the device has infrared remote capability.

If not, the controller does not work.

Make sure that the batteries are not worn out and

that they are inserted correctly.

Trouble shooting

Specifications:

Operable distance: More than 8 metres

Power type: DC 3V(two AA batteries)

Battery Duration: About 12 months

EIN/AUS

Programm +

Lautstarke -

Kontrolllicht

Stummschaltung

Gerateauswahl

TV/AV

Programmwahl

Programmierung

Video

Funktionen

schneller

Rucklauf

schneller Vorlauf

Aufnahme

Stopp

Wiedergabe

Pause

CH*P/C

2/12

0/10

1/11

Zweikanalton

Tastenbeschreibung

Lautstarke +

Programm -

DGB

CH*P/C

Page is loading ...

HQ RC UNIVERS30 Specification

HQ RC UNIVERS30 Specification

in other languages

Related papers

Other documents