Belkin F8E825-USB User manual

F8E825veaUSB

EN

User Manual

FR

Manuel de l’utilisateur :

DE

Benutzerhandbuch

NL

Handleiding

ES

Manual de usuario

IT

Manuale utente

www.belkin.co.uk/support

Navigate your notebook with optical

precision and wireless freedom

MiniWireless

Optical Mouse

P74810ea_F8E825veaUSB_man.indd 1 15/2/05 4:35:06 pm

Table of Contents

English

Battery Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

ID Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Button Function Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Français

Installation des piles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installation de matériel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation du pilote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Réglage de l’identité

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Réglage de la fonction des boutons

. . . . . . . . . . . . . . . . 14

Dépannage

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Deutch

Einlegen der Batterie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Hardwareinstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Treiberinstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Einstellen der Kennung

. . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Einrichten der Tastenfunktionen. . . . . . . . . . . . . . . . . . . . . 20

Fehlerbehebung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

P74810ea_F8E825veaUSB_man.indd 2 15/2/05 4:35:06 pm

Page is loading ...

Battery Installation

section

1

2

3

4

5

6

4

5

1. Press the button to open the top cap. (fig. 1) (fig. 1-1)

2. Insert 2 AAA batteries. (fig. 1-2)

3. Replace the top cap and close it.

CAUTION!

• Be sure to check polarity (+ or – sign) and insert battery

properly.

• Make sure battery type is AAA alkaline (1.5V).

• Remove the batteries if mouse will not be in use for a long

time.

• Each time you replace the batteries, repeat the mouse

setup by following the “setup for linkage” (fig. 5).

P74810ea_F8E825veaUSB_man.indd 4 15/2/05 4:35:06 pm

4

5

Hardware Installation

section

1

2

3

4

5

6

1. Shut down the computer.

2. Connect the receiver either directly or with the USB

extension cable to the USB port on the PC. (fig. 2)

3. Place the receiver beside the notebook or desktop PC.

(fig. 3)

4. Turn on the PC.

5. Switch on the power of the wireless mouse located on

the backside of the mouse. (fig. 4)

CAUTION!

While traveling, please switch off the unit to save battery

power. (fig. 4)

P74810ea_F8E825veaUSB_man.indd 5 15/2/05 4:35:07 pm

6

Driver Installation

section

1

2

3

4

5

6

7

1. Insert the installation CD into your CD-ROM drive.

2. The CD should automatically load the installation. If it

does not load, click “Start” then “Run”, then type “X:\

setup” (replace “X” with the correct drive letter for your

CD-ROM drive, usually D). Then follow through the on-

screen instructions to complete the installation.

3. When the setup is complete, the system will restart

automatically. It will show a mouse icon in the bottom

right-hand corner of the screen.

CAUTION:

Some computers running Windows® 98 will require insertion

of the Windows 98 CD to finish the installation of the driver.

P74810ea_F8E825veaUSB_man.indd 6 15/2/05 4:35:07 pm

6

7

ID Setup

section

1

2

3

4

5

6

1. Aim the front point of the mouse at the receiver.

2. IMPORTANT: FIRST, PRESS THE CONNECT BUTTON

OF THE MOUSE; THEN PRESS THE CONNECT BUTTON

OF THE RECEIVER (fig. 5). NEVER REVERSE THIS

PROCEDURE.

3. When the connect button of the receiver is pressed, the

LED inside the receiver willlight. As soon as the linkage is

completed, the LED will go off.

4. The setup must be completed within one minute. If setup

time exceeds one minute, repeat procedure.

P74810ea_F8E825veaUSB_man.indd 7 15/2/05 4:35:07 pm

8

Button Function Setup

section

1

2

3

4

5

6

9

1. Start the setup from the Control Panel or directly click on

the mouse icon at the bottom right corner of the screen.

It shows the following functions:

- Button: set up for either right or left hand, and adjust the

speed

- Wheel: set up the functions for hot keys and zooming

- Motion: set up the speed of the mouse pointer

2. After the function is set up, press “Yes” to store the new

setup.

SETUP FOR MULTI-USERS

When using more than one MiniWireless Optical Mouse in

the same location, set up one mouse at a time. You must

complete the setup for each mouse before beginning the

next.

ENVIRONMENT

To avoid environmental interference, which will shorten the

effective operation distance, please note the following:

1. Do not put the mouse and receiver on a metal cabinet or

desk. Metal creates RF interference, which may impair

the RF communication and shorten the communication

distance.

2. Keep a distance of more than 1.5m between your mouse

and another operational RF device to avoid interference.

3. The optical sensor of the mouse will not work correctly if

placed on amirror, glass, or on any reflecting or half-tone

painted surface.

P74810ea_F8E825veaUSB_man.indd 8 15/2/05 4:35:07 pm

8

9

Troubleshooting

section

1

2

3

4

5

6

The cursor doesn’t react when I move the mouse.

1. This is probably because the distance between the receiver and

mouse exceeds the working range. Simply adjust so that the

mouse is closer to the receiver.

2. Make sure that the mouse is not placed on a reflective surface

such as a mirror, glass, half-tone painted surface, or on a 3D

mouse pad. When using this wireless device on a metal table or

near metal furniture, use a non-reflective, thick mouse pad to

reduce the potential for interference.

3. Your ID setup may not have worked properly. Please repeat the

ID setup process.

TECHNICAL SPECIFICATIONS

Works with Windows 98, 2000, Me, or XP.

When using Windows 98 and setting up the mouse using a USB

port, you may need your Windows 98 installation CD.

UNINSTALL INSTRUCTIONS

1. Go to “Start” then “Programs” and select “Belkin

F8E825veaUSB mini wireless optical mouse”.

2. You should then see the “uninstall” option. Left-click on it.

3. Choose your desired language and click “OK”.

4. Then follow the on screen instructions to complete the uninstall.

Note: You may encounter some “Locked File Detected” screens

during the uninstall. If so left-click on the “Reboot” option for

them. It will then remove those locked files during the next reboot

of your system.

P74810ea_F8E825veaUSB_man.indd 9 15/2/05 4:35:07 pm

Page is loading ...

12

13

section

1

2

3

4

5

6

1. Dirigez l’avant de la souris vers le récepteur.

2. IMPORTANT : AVANT TOUTE CHOSE, APPUYEZ SUR LE

BOUTON « CONNECT » DE LA SOURIS, PUIS APPUYEZ

SUR LE BOUTON « CONNECT » DU RÉCEPTEUR (fig. 5).

N’INVERSEZ JAMAIS CES DEUX ÉTAPES.

3. Après avoir appuyé sur le bouton « Connect » du

récepteur, le témoin lumineux à l’intérieur du récepteur

s’allume. Dès que le lien est réalisé, le témoin lumineux

s’éteint.

4. Le réglage doit être effectué en une minute. Si le

temps de réglage prend plus d’une minute, répétez la

procédure.

Réglage de l’identité

P74810ea_F8E825veaUSB_man.indd 13 15/2/05 4:35:08 pm

Page is loading ...

30

31

section

1

2

3

4

5

6

1. Dirija la parte frontal del ratón hacia el receptor.

2. IMPORTANTE: PULSE EN PRIMER LUGAR EL BOTÓN

DE CONEXIÓN DEL RATÓN Y DESPUÉS EL BOTÓN DE

CONEXIÓN DEL RECEPTOR (fig. 5). NUNCA LLEVE A

CABO ESTE PROCEDIMIENTO A LA INVERSA.

3. Cuando el botón de conexión del receptor se encuentre

accionado, se iluminará el LED del interior del mismo.

Tan pronto como se haya completado el enlace se

apagará el LED.

4. La configuración deberá ser completada en el plazo

de un minuto. Si el tiempo de configuración supera el

minuto, repita el procedimiento.

Configuración de ID

P74810ea_F8E825veaUSB_man.indd 31 15/2/05 4:35:11 pm

Page is loading ...

36

37

section

1

2

3

4

5

6

1. Puntare l’estremità anteriore del mouse verso il ricevitore.

2. IMPORTANTE: INNANZITUTTO PREMERE IL PULSANTE

DI CONNESSIONE DEL MOUSE, QUINDI PREMERE IL

PULSANTE DI CONNESSIONE DEL RICEVITORE (fig. 5).

NON INVERTIRE MAI LE FASI DELLA PROCEDURA.

3. Premendo il pulsante di connessione del ricevitore, il LED

al suo interno si accende. Non appena il collegamento è

terminato, il LED si spegne.

4. La procedura di setup deve essere completata entro un

minuto, se si dovesse superare questo intervallo, ripetere

la procedura.

Impostazione ID

P74810ea_F8E825veaUSB_man.indd 37 15/2/05 4:35:12 pm

Page is loading ...

40

41

Information

FCC/CE Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton,

CA 90220, declare under our sole responsibility that the product,

F8E825-USB, to which this declaration relates, complies

with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference

received, including interference that may cause undesired

operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC

radio frequency exposure limits. Nevertheless, the device shall

be used in such manner that the potential for human contact

normal operation is minimized.

When connecting an external antenna to the device, the antenna

shall be placed in such a manner to minimize the potential for

human contact during normal operation. In order to avoid the

possibility of exceeding the FCC radio frequency exposure

limits, human proximity to the antenna shall not be less than

20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio

P74810ea_F8E825veaUSB_man.indd 40 15/2/05 4:35:13 pm

40

41

Information

frequency energy. If not installed and used in accordance with

the instructions, it may cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try and correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Modifications

The FCC requires the user to be notified that any changes or

modifications to this device that are not expressly approved by

Belkin Components may void the user’s authority to operate the

equipment.

Canada-Industry Canada (IC)

The wireless radio of this device complies with RSS 139 & RSS

210 Industry Canada.

This Class B digital complies with Canadian ICES-003.

Cet appareil numérique de la classe B conforme á la norme

NMB-003 du Canada.

Europe-European Union Notice

Radio products with the CE alert marking comply with the

R&TTE Directive (1995/5/EC) issued by the Commission of the

European Community.

Compliance with this directive implies conformity to the

P74810ea_F8E825veaUSB_man.indd 41 15/2/05 4:35:13 pm

42

43

Information

following European Norms (in brackets are the equivalent

international standards).

• EN 60950 (IEC60950) – Product Safety

• EN 300 328 Technical requirement for radio equipment.

• ETS 300 826 General EMC requirements for radio equipment.

To determine the type of transmitter, check the identification

label on your Belkin product.

Products with the CE marking comply with the EMC Directive

(89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued

by the Commission of the European Community. Compliance

with these directives implies conformity to the following

European Norms (in brackets are the equivalent international

standards).

• EN 55022 (CISPR 22) – Electromagnetic Interference

• EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic

Immunity

• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics

• EN 61000-3-3 (IEC610000) – Power Line Flicker

• EN 60950 (IEC60950) – Product SafetyProducts that contain

the radio transmitter are labeled with CE 0682 or CE alert

marking and may also carry the CE logo.

Belkin Corporation Limited Lifetime Product Warranty

Belkin Corporation warrants this product against defects

in materials and workmanship for its lifetime. If a defect is

discovered, Belkin will, at its option, repair or replace the

P74810ea_F8E825veaUSB_man.indd 42 15/2/05 4:35:13 pm

42

43

Information

product at no charge provided it is returned during the warranty

period, with transportation charges prepaid, to the authorized

Belkin dealer from whom you purchased the product. Proof of

purchase may be required.

This warranty does not apply if the product has been damaged

by accident, abuse, misuse, or misapplication; if the product has

been modified without the written permission of Belkin; or if any

Belkin serial number has been removed or defaced.

THE WARRANTY AND REMEDIES SET FORTH ABOVE

ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER

ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN

SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION,

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE.

No Belkin dealer, agent, or employee is authorized to make any

modification, extension, or addition to this warranty.

BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY

BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL

THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS,

DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING,

OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR

USED WITH BELKIN PRODUCTS.

Some states do not allow the exclusion or limitation of incidental

or consequential damages or exclusions of implied warranties,

so the above limitations of exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also

have other rights that vary from state to state.

P74810ea_F8E825veaUSB_man.indd 43 15/2/05 4:35:13 pm

MiniWireless

Optical Mouse

Belkin Ltd.

Express Business Park • Shipton

Way Rushden • NN10 6GL •

United Kingdom

Tel: +44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin B.V.

Starparc Building • Boeing Avenue

333

1119 PH Schiphol-Rijk • The

Netherlands

Tel: +31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin GmbH

Hanebergstrasse 2

80637 Munich • Germany

Tel: +49 (0) 89 143405 0

Fax: +49 (0) 89 143405 100

Belkin SAS

5 Rue du Petit Robinson • 3ème

étage

78350 Jouy en Josas • France

Tel: +33 (0) 1 34 58 14 00

Fax: +33 (0) 1 39 46 62 89

Belkin Tech Support

Europe: 00 800 223 55 460

manufacturers listed. 54g is a trademark of Broadcom Corporation in the U.S. and other countries.

Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple Computer, Inc., registered in the

U.S. and other countries.

P74810ea

P74810ea_F8E825veaUSB_man.indd 44 15/2/05 4:35:13 pm

Belkin F8E825-USB User manual

This manual is also suitable for

Belkin F8E825-USB User manual

in other languages

Related papers

Other documents