CREE LIGHTING CDR Series Trim Ring and Decorative Baffle Installation guide
- Type
- Installation guide
CDR Series
LED Downlight
Trim Ring and Decorative Baffle
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
1 of 1 LPN00687X0002A0_A
© 2021 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree® and the Cree logo are
registered trademarks of Cree, Inc.
www.creelighting.com
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed including the
following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
1. DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l’alimentation avant l’installation.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
INSTALLATION
STEP 1:
Put the decorative baffle into the fixture. See Figure 1.
STEP 2:
Place Trim Ring on the fixture. See Figure 2 and 3.
STEP 3:
Bend the metal tabs over the fixture lip to retain the decorative baffle
and trim ring to the fixture. See Figure 4.
TO INSTALL:
Decorative circle
1
metal button
3
Trim
2
metal button
4
Decorative Baffle Trim Ring
Metal Tab
Metal Tab
-
1
CREE LIGHTING CDR Series Trim Ring and Decorative Baffle Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI