Homestyles 6730-60-10D-21 Operating instructions

Homestyles
Brand
Homestyles
Model
6730-60-10D-21
Type
Operating instructions

This manual is also suitable for

Homestyles 6730-60-10D-21 is a stylish and comfortable chair that is perfect for any home. Constructed from durable aluminum, this chair is sturdy and lightweight and easy to assemble. The chair features soft cushions that provide excellent comfort, and the cushions are removable for easy cleaning. The chair is also easy to care for, simply wipe it down with a damp cloth. With its stylish design and comfortable features, this chair is a great addition to any home.

Homestyles 6730-60-10D-21 is a stylish and comfortable chair that is perfect for any home. Constructed from durable aluminum, this chair is sturdy and lightweight and easy to assemble. The chair features soft cushions that provide excellent comfort, and the cushions are removable for easy cleaning. The chair is also easy to care for, simply wipe it down with a damp cloth. With its stylish design and comfortable features, this chair is a great addition to any home.

Part List
6730-10
Chair
B.
Side
1 pc.
G.
Back Cushion
1 pc.
E.
Non-slip Pad
1 pc.
C.
Side
1 pc.
D.
Rail
1 pc.
F.
Seat Cushion
1 pc.
Hardware List
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
10 pcs. (+1 extra)
M6x35
Head Cap Bolt
6 pcs. (+1 extra)
M6x20
Head Cap Bolt (short)
4 pcs. (+1 extra)
Flat Washer
10 pcs. (+1 extra)
Cap
10 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
A.
Seat
1 pc.
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach (D) to Side (B) with Head Cap Bolts (short), Spring Washers and Flat Washers,Rail
tightening bolts only halfway. (See Figure 1)
Attach Seat (A) to unit with Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt (short)
A
B
D
STEP 2
Attach Side (C) to unit with Head Cap Bolts, Head Cap Bolts (short), Spring Washers
and Flat Washers, tightening bolts only halfway.
Tighten all bolts used in Steps 1 and 2.
Cover all Head Cap Bolts with Caps. (See Figure 2)
Assembly Instructions /35
C
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt (short)
Cap
Figure 2
Assembly Instructions /45
STEP 3
Turn unit to its upright position.
Place Non-slip Pad (E) into position.
E
Assembly Instructions /55
STEP 4
Place Seat Cushion (F) into position.
Place Back Cushion (G) into position.
F
G
Cushion Care Instructions
Keep cushions free of natural debris.
Tip and angle cushions after use.
Store cushions inside when not in use.
Allow a minimum of 24 hours for wet cushions to air dry.
Never use a hairdryer on cushions.
Never put cushions in a clothes dryer.
Cushion covers are hand wash and air dry only.
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Part List
6730-60
Loveseat
B.
Side
1 pc.
G.
Back Cushion
2 pcs.
C.
Side
1 pc.
D.
Rail
1 pc.
E.
Seat Cushion
1 pc.
Hardware List
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
10 pcs. (+1 extra)
M6x35
Head Cap Bolt
6 pcs. (+1 extra)
M6x20
Head Cap Bolt (short)
4 pcs. (+1 extra)
Flat Washer
10 pcs. (+1 extra)
Cap
10 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
A.
Seat
1 pc.
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach Rail (D) to Side (B) with Head Cap Bolts (short), Spring Washers and Flat Washers,
tightening bolts only halfway. (See Figure 1)
Attach Seat (A) to unit with Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt (short)
A
B
D
STEP 2
Attach Side (C) to unit with Head Cap Bolts,
Head Cap Bolts (short), Spring Washers and Flat Washers, tightening bolts only halfway.
Tighten all bolts used in Steps 1 and 2.
Cover all Head Cap Bolts with Caps. (See Figure 2)
Assembly Instructions /34
C
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt (short)
Cap
Figure 2
STEP 3
Place Seat Cushion (E) into position.
Place Back Cushions (G) into position.
E
G
G
Assembly Instructions /44
Cushion Care Instructions
Keep cushions free of natural debris.
Tip and angle cushions after use.
Store cushions inside when not in use.
Allow a minimum of 24 hours for wet cushions to air dry.
Never use a hairdryer on cushions.
Never put cushions in a clothes dryer.
Cushion covers are hand wash and air dry only.
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Part List
6730-21
Coffee Table
B.
Side
2 pcs.
Hardware List
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
8 pcs. (+1 extra)
M6x35
Head Cap Bolt
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Cap
8 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
A.
Top
1 pc.
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach Side (B) to Top (A) with Head Cap Bolts, Spring Washers and Flat Washers,
tightening bolts only halfway.
(See Figure 1)
Flat Washer
Spring Washer
Head Cap Bolt
A
B
STEP 2
Attach Side (B) to unit with Head Cap Bolts, Spring Washers and Flat Washers,
tightening bolts only halfway.
Tighten all bolts used in Steps 1 and 2.
Cover all Head Cap Bolts with Caps.
(See Figure 2)
Turn over unit to its upright position.
Assembly Instructions /33
Cap
Figure 2
Flat Washer
Spring Washer
Head Cap Bolt
B
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Homestyles 6730-60-10D-21 Operating instructions

Homestyles
Brand
Homestyles
Model
6730-60-10D-21
Type
Operating instructions
This manual is also suitable for

Homestyles 6730-60-10D-21 is a stylish and comfortable chair that is perfect for any home. Constructed from durable aluminum, this chair is sturdy and lightweight and easy to assemble. The chair features soft cushions that provide excellent comfort, and the cushions are removable for easy cleaning. The chair is also easy to care for, simply wipe it down with a damp cloth. With its stylish design and comfortable features, this chair is a great addition to any home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents