STRUCTUBE Loft Assembly Instructions

Type
Assembly Instructions

STRUCTUBE Loft empowers you to customize your sleep experience and elevate your comfort. This adjustable bed base offers a range of features to cater to your individual needs and preferences:

  • Adjustable Height: Effortlessly raise or lower the head and foot of your bed to find the perfect position for reading, watching TV, or simply relaxing.

  • Wireless Remote Control: Control your bed's movements from the convenience of your bedside, allowing you to adjust your position without having to get out of bed.

  • Multiple Preset Positions: Save your favorite positions for quick and easy access, ensuring a personalized sleep experience tailored to your needs.

STRUCTUBE Loft empowers you to customize your sleep experience and elevate your comfort. This adjustable bed base offers a range of features to cater to your individual needs and preferences:

  • Adjustable Height: Effortlessly raise or lower the head and foot of your bed to find the perfect position for reading, watching TV, or simply relaxing.

  • Wireless Remote Control: Control your bed's movements from the convenience of your bedside, allowing you to adjust your position without having to get out of bed.

  • Multiple Preset Positions: Save your favorite positions for quick and easy access, ensuring a personalized sleep experience tailored to your needs.

STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
1/9
COMPONENTS / COMPOSANTES
Ax1
Bed Frame
Bx1
Cx1
Remote Control
Dx6
Adjustable Leg/
Foot Pad
Ex1
Power Supply
Backup
Battery
Holder
Fx1
AC Power Cord
Gx1
Hx1 Ix1
Sync cable and sync strap will only be used
when 2 bases are being linked together. If
not being used, please keep in a safe place
for possible future use.
PLEASE NOTE / VEUILLEZ NOTER
- FOR USER SAFETY PERIODICALLY VERIFY AND TIGHTEN ALL FITTINGS / POUR LA SÉCURITÉ DE
L'UTILISATEUR VÉRIFIER ET SERRER PÉRIODIQUEMENT TOUS LES RACCORDS
- THIS ITEM IS DESIGNED FOR RESIDENTIAL USE ONLY / CET ARTICLE EST CONÇU POUR UN
USAGE RÉSIDENTIEL UNIQUEMENT
- USE POWER TOOLS ONLY WHEN INDICATED / UTILISER DES OUTILS ÉLECTRIQUES UNIQUEMENT
QUAND INDIQUÉ
- FOR AFTER-SALES PARTS SERVICE PLEASE REFERENCE: / POUR LE SERVICE APRÈS-VENTE DE
PIÈCES, VEUILLEZ VOUS RÉFÉRER: 17.72.58.v1_117794
- ASSEMBLY INSTRUCTIONS MAY BE REVISED AT ANY TIME. THE MOST RECENT VERSION CAN BE
FOUND BY VISITING: / LES INSTRUCTIONS DE MONTAGE PEUVENT ÊTRE RÉVISÉES À TOUT
MOMENT. LA VERSION LA PLUS RÉCENTE PEUT ÊTRE TROUVÉE À: WWW.STRUCTUBE.COM
Mattress
Retainer Bar
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
2/9
CLEAN AND CARE / NETTOYER ET ENTRETIEN
ENG: To keep your fabric upholstered furniture looking new, keep it away from direct sunlight as it may discolor
over time. Use a vacuum cleaner with gentle fabric attachment to remove dust and debris as needed. Spills
must be cleaned immediately. Avoid rubbing or dabbing as it will penetrate deeper into the fabric fibers and
possibly into the stuffing below. Attempt to soak up as much as possible with paper towel or other very
absorbent clean/dry cloth. For spills that result in stains, first attempt to clean with mild diluted dish soap in
water, and if that doesn’t work consult a furniture cleaning specialist. Structube does not test nor recommended
any particular cleaning product. After cleaning make sure to dry the area with a fan or blow dryer without heat.
When vacuuming underneath, do not drag as it may dislodge the legs and/or damage the frame. Take good care
of your new item and it will take care of you!
FRE: Pour que vos meubles rembourrés en tissu gardent leur aspect neuf, éloignez-les de la lumière directe du
soleil car ils peuvent se décolorer avec le temps. Utilisez un aspirateur avec un accessoire en tissu doux pour
enlever la poussière et les débris au besoin. Les déversements doivent être nettoyés immédiatement. Évitez de
frotter ou de tamponner car cela pénétrera plus profondément dans les fibres du tissu et éventuellement dans le
rembourrage en dessous. Essayez de vous imprégner autant que possible avec une serviette en papier ou un
autre chion propre/sec très absorbant. Pour les déversements qui causent des taches, essayez d'abord de
nettoyer avec du savon à vaisselle doux dilué dans de l'eau, et si cela ne fonctionne pas, consultez un spécialiste
du nettoyage de meubles. Structube ne teste ni ne recommande aucun produit de nettoyage en particulier. Après
le nettoyage, assurez-vous de sécher la zone avec un ventilateur ou un sèche-cheveux sans chaleur. Lorsque vous
passez l'aspirateur en dessous, ne traînez pas car cela pourrait déloger les pieds et/ou endommager le cadre.
Prenez soin de votre nouvel article et il prendra soin de vous !
BEFORE USE
READ ALL SAFETY INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
Two-person assembly / movement of the base is required.
Carefully remove packaging taking extra caution if using a knife to not unintentionally cause damage.
Doublecheck when discarding packaging that no parts/pieces are still within.
Only use the components provided by the manufacturer. Do not add on any aftermarket parts or
accessories.
CRUSH/PINCH WARNING - This product has moving parts and can cause serious injury. Please keep fingers
clear of moving parts, allow enough clearance for freedom of movement, and above all else ensure there are
no children or pets under or around the bed.
CHOKING HAZARD - This product contains small parts. Prevent serious injury and suffocation, keep children and
pets away from small parts.
ELECTROCUTION WARNING
Always unplug this bed from the electrical outlet before cleaning or servicing.
Do not modify or add any electrical components including adapters for different regional voltage.
Ensure the electrical outlet is properly grounded. A surge protector between the outlet and bed base is
recommended.
Ensure all electrical cables are free and clear of moving parts to prevent crushing and possible electrocution.
Do not use liquids on or near this product. If spillage occurs, disconnect the power immediately and ensure all
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
3/9
components are completely dry before reconnecting.
Never operate with a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not use sharp objects on or near.
Do not use this product outdoors.
The product should not be placed in an area that is too humid or exposed to direct sunlight, and the air should
be kept properly circulated so as not to affect the normal use of the product.
PACEMAKERS
Some pacemakers may detect motion by this product as a false sense of movement or exercise. This may or
may not affect your pacemaker. Talk to a physician to address any concerns.
HOME USE / HOSPITAL DISCLAIMER
This product is designed solely for in-home use and not as a hospital bed. The product has not been tested to meet
hospital standards. Do not use with oxygen or other ammable gasses.
WEIGHT RESTRICTION
The recommended weight restriction is 850 lbs. [including the weight of the mattress, bedding, and user(s).
This product will support the recommended weight limits when weight is distributed evenly across the base.
Thisproduct is not designed to support or lift this amount in the head or foot sections alone. Consumers should
not enter or exit the bed when any portion of it is in the raised position. Do not sit on the head or foot sections
while in the raised position. Exceeding the recommended weight restrictions or other misuse of this product
could damage the bed and void the warranty.
PRODUCT RATINGS
IMPORTANT: USE THIS PRODUCT ONLY AS DESCRIBED IN THESE INSTRUCTIONS.
DO NOT MODIFY ANY PARTS OR COMPONENTS.
MOTOR RATINGS
The motors are not designed to operate for more than two continuous minutes within an18-minute time
period. Exceeding this rating will shorten the life of the motors and void the warranty.
POWER RATINGS
INPUT: AC 100-240V - 50/60Hz, 1.5 Amp
OUTPUT: DC 29V-2A
Do not attempt any electrical maintenance or modification. Do not open any electrical components, alter the
wiring, modify the base, or change the product in any way as it may result in electrocution and will void the
warranty.
FCC COMPLIANCE (USA)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Operates on 2.4 GHz frequency transmitter.
To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding the RF exposure requirement and
voiduser’s right to operate the device.
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
4/9
ELECTRICAL OVERVIEW
Sync Cable
(only required when syncing two beds)
Power Supply
Control box
Linear Actuator
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
5/9
x1
1) a. Remove the bed base from the box, unfold top-side down on a clean/level
surface.
b. Remove the parts box.
x4
x1
2)
Attached the legs:
a. Select from 3 possible heights. Ensure all 6 legs are adjusted to the same height.
b. Affix included felt pads.
c. The base may be used without legs. Ensure it is fully supported ONLY on the metal frame where
the legs would be affixed. Affix the felt pads directly on the metal frame.
Height 1
Height 2
Height 3
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
6/9
3)
Connect the power supply.
4)
With a minimum of two persons turn the base over. Insert the mattress retainer bar.
Insert
Warning
Use caution when lifting the base. Do not hold by the fabric. Take care of
hands and ngers to avoid crush/pinch. Do not pivot on any of the legs.
Po
we
Su
ppl
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
7/9
5)
Connect the power. Test all functions BEFORE placing the mattress.
AC Power Cord
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
8/9
BACKUP BATTERY OPERATION
For emergency use only, in case of a power outage. Battery backup is not to be used for regular operation of
the bed. (Note: Only head down and foot down keys are operational.)
1) Disconnect the electrical cable from the outlet.
2) Disconnect the power supply to the control box.
3) Connect 2 new, same brand, alkaline 9V batteries (not included) to the holder.
(Not
(Not included)
included)
STRUCTUBE
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
LOFT
LIFESTYLE ADJUSTABLE TWIN XL BED /
BASE STYLE DE VIE SIMPLE XL
9/9
4) Connect the battery backup to where the power supply control box was previously connected.
5) Using the head down and foot down buttons on the remote lower to desired position.
6) Once done, remove the battery back up and reconnect the power supply control box.
7) It is recommended to reconnect the power to the outlet only after electricity is restored.
17.72.58.v1_117794
1
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
Position
Remote Control Overview
Flat Position
Zero Gravity
Head Up
Head Down
Foot Up
Foot Down
Programmable
Underbed
Postion M1
Lighting
Programmable
Postion M2
One touch FLAT preset position
One touch to Zero Gravity preset position
Raise/lower the head
Raise/lower the foot
One touch to memory positions
One touch underbed-lighting On/Off
17.72.58.v1_117794
2
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
OPERATING THE REMOTE
PROGRAMMING MEMORY M1 and M2
To save to M1 Press & hold the "M1" button until the backlight flashes 3 times (approx.
5 seconds).
To save to M2 Press & hold the "M2" button until the backlight flashes 3 times (approx.
5 seconds).
CHILD LOCK FUNCTION
TO ACTIVATE
Press & hold + “ simultaneously until the backlight flashes 3 times (approx. 5
seconds). Once the child safety lock is activated all buttons will be inoperable and if
pushed the backlight will flash twice.
TO DEACTIVATE
Press & hold the '' '' + '' '' simultaneously until the backlight flashes 2 times. Keep
holding
until the backlight flashes another 3 times. The child lock is now deactivated.
17.72.58.v1_117794
3
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
SYSTEM RESET
Press & hold the ''ZeroG'' + ''FLAT'' simultaneously until the backlight flashes 3 times. All
functions
are reset to factory settings.
SYNCHRONIZING TWO BASES
NOTE
BEFORE SYNCHING THE REMOTE PLEASE ASSEMBLE THE SYNC STRAP AND SYNC CABLE
WITH THE BASES LINKED TOGETHER DO NOT OPERATE ANY FUNCITON ON THE REMOTE
UNTIL IT HAS BEEN SYNCED OR RISK DAMAGING THE BASES
SYNC ON
Press & Hold ''FLAT'' until the backlight flashes 3 times (approx. 5 seconds)
SYNC OFF
Press & Hold ''FLAT'' until the backlight flashes 3 times (approx. 5 seconds)
17.72.58.v1_117794
4
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
INSTALLATION OF SYNC STRAP AND SYNC CABLE
1) DISCONNECT THE POWER FROM WALL OUTLET
2) Place both bases side-by-side and connect the sync strap by loosening the feet at the uppermost
height (touching the metal frame). Do this twice Once at the level of the head and once at the level
of the foot.
b
a
3)
Connect the sync cable to the multifunction port (MFP) of each control box.
Sync Cable
4) Reconnect the power to the wall outlet.
5) Follow the steps to synchronize the remote.
17.72.58.v1_117794
5
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
Remote Control Pairing
The remote control and base are paired before leaving the factory.
If the remote is not working first
verify if the batteries are good.
STEPS TO PAIR
1)
Unplug the power ensuring the power
light goes out
.
2)
Re-plug the power immediately
pressing and
holding ''
'' & ''
''
simultaneously.
3)
The remote backlight flashes to
indicate it is pairing. Pairing is completed
once the flashing stops.
17.72.58.v1_117794
6
LIFESTYLE ADJUSTABLE TWIN XL BED “LOFT” OPERATION MANUAL
Troubleshooting
DO NOT OPEN OR ATTEMPT TO REPAIR ANY ELECTRICAL COMPONENTS
ENSURE THE BASE IS UNPLUGGED WHEN VERIFYING CABLES AND CONNECTIONS
THE BASE HAS MOVING PARTS, TAKE CAUTION TO AVOID FINGER PINCH AND/OR CRUSHING INJURIES
Problem
Solution
The base will not function
1.
Verify if child lock function is activated.
2.
Verify if all electrical connections are secure.
3.
Verify that the wall outlet has power.
4.
Ensure there is nothing under or near the bed that may impede its
movement.
5.
Verify if the battery in the remote is good.
6.
Attempt a system reset.
7.
Re-pair the remote.
A 'click' sound is heard under the adjustable bed
when raising or lowering the head section.
The motor makes a clicking sound when in operation. This is normal.
No action is required.
The adjustable bed squeaks.
Lubricate all fittings.
Zero Gravity, M1, and/or M2
buttons don’t
work.
Press and hold the FLAT button until the bed is fully flat.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

STRUCTUBE Loft Assembly Instructions

Type
Assembly Instructions

STRUCTUBE Loft empowers you to customize your sleep experience and elevate your comfort. This adjustable bed base offers a range of features to cater to your individual needs and preferences:

  • Adjustable Height: Effortlessly raise or lower the head and foot of your bed to find the perfect position for reading, watching TV, or simply relaxing.

  • Wireless Remote Control: Control your bed's movements from the convenience of your bedside, allowing you to adjust your position without having to get out of bed.

  • Multiple Preset Positions: Save your favorite positions for quick and easy access, ensuring a personalized sleep experience tailored to your needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages