2. Home
  3. Domestic appliances
  4. Small kitchen appliances
  5. Coffee grinders
  6. Livoo
  7. DOD191
DOD191

Livoo DOD191 User manual

  • Hello! I have reviewed the user manual for the LIVOO DOD191 coffee grinder. This document includes important safety instructions, details on how to set the coffee grind size, and various operation modes. I can help you find information and answer questions about the product. Feel free to ask!
  • What should I do if the appliance overheats?
    How do I clean the burrs?
    What is the maximum time of continuous functioning for the appliance?
User manual
WWW.LIVOO.FR
Reference : DOD191
Version : 1.4
Language : English
Coffee grinder
User manual
1
You have purchased a product LIVOO brand and we thank you. We take great care in design, ergonomics
and ease of use of our products. We hope that this product will give you complete satisfaction
SAFETY INSTRUCTIONS
PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR
USE PARTICULARLY BEFORE THE FIRST USE.
A misuse of the appliance can damage it or hurt the user.
Assure that you use the appliance for the use for which it is
designed, we refuse any responsibilities as for the damages
by an incorrect use or a bad manipulation.
1. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
2. Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and if they understand the hazards involved.
3. Children shall not play with the appliance.
4. This appliance is intended to be used in household and
similar applications such as:
• staff kitchen areas in shops, offices and other
working environments
• farm houses
• by clients in hotels, motels and other
User manual
2
residential type environments
• bed and breakfast type environments
5. Check that your main voltage corresponds to that stated
on the appliance. Multiple plug is misadvised.
6. Do not use the appliance if your hands are damp or with
naked foot.
7. In case the appliance accidentally bad work, disconnect it
immediately.
8. Never unplug the appliance by pulling the cord. Make sure
the cord cannot get caught in any way.
9. Never leave the appliance unsupervised when in use.
10. Never move the appliance when in use.
11. Protect the appliance of the froze and humidity.
12. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard (*)
13. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or
cleaning.
14. Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
15. Do not touch the blades and do not insert any object
(knives, forks, spoons, etc.) into the bowl while the
product is underway
User manual
3
16. All appliances are submit to serious quality control. Some
tries are doing at random, so that may have tracks of use.
17. Keep the appliance, the cord or main unit at a distance
from hot objects, wet surface and sharp angle.
18. The appliance must be used with his supplied lid and main
unit only.
19. Never immerse the base of your appliance, the cord or
plug in water or any other liquid for any reason
whatsoever. Never place it into the dishwasher.
20. The guarantee covers the manufacturing defects and the
domestic use only. Any breakage or deterioration resulting
from failure to respect the instruction of use does not
enter within the framework of the guarantee.
21. Do not use wire brush or any abrasive items or liquids.
22. Do not fill over the maximum level, nor below the
minimum level.
23. The appliance is not intended to be operated by means of
external timer or separate remote control system.
24. Never disassemble the appliance yourself.
25. It is absolutely necessary to keep this appliance clean at all
times as it comes into direct contact with food.
26. Regarding the instructions for cleaning surfaces in contact
with food or oil, thanks to refer to the below paragraph
"cleaning" in manual.
27. Regarding the instructions for the use of accessories,
operation times and speed settings, thanks to refer to the
below paragraphs.
User manual
4
28. Care shall be taken when handling the sharp cutting
blades, emptying the bowl and during cleaning.
29. There is potential injury from misuse.
30. Accessories, other than those supplied with the
appliance, shall include instructions for their safety use.
(*)
Competent qualified electrician: after sales department of the producer or importer or any person
who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger.
In any case you should return the appliance to this electrician.
This instruction manual is available too on our website www.livoo.fr
SPECIFICS MEASURES
Warning :
1. Never touch blades when the machine is connected.
2. Take away fingers, clothes, hair and utensils of the device
hanging the mixture to decrease the risks of grave physical
wounds or damage in the device.
3. Use the appliance no more than 10 seconds at the same
time, a little let it rest before the next use to avoid any
overheating.
TECHNICAL SPECIFICATIONS
Voltage:
220-240V~ 50-60Hz
Power: 180W
KB: 25 seconds with rest periods of 1 min, 2 cycles (maximum time of continuous functioning)
User manual
5
ABOUT GRINGDING COFFEE
The proper grind gives the most flavorful cup of coffee. The grind size and amount depend on the method by
which the coffee is to be brewed. Generally, the finer the grind the more quickly the coffee should be prepared.
That is why coffee ground for an espresso machine extraction is much finer than coffee to be brewed in a drip
system.
Coffee that is ground too fine for a particular brewing process - (For example, fine espresso grind used in a filter
drip coffee machine) will result in over-extraction and bitter, pungent tasting coffee. Conversely, coffee that is too
coarse for a particular brew method will result in under-extraction and weak, watery coffee. If the correct grind is
used, adding more coffee simply makes a brew stronger without making it bitter.
In addition to providing a range of grind settings, coffee grinders provide a consistent grind. This is important to
ensure the extraction is consistent across all of the ground coffee particles.
DESCRIPTION
A. Bean box lid
B. Bean box
C. Removable upper
conical burr
D. Ground coffee fineness
ring
E. Housing
F. “START/STOP” button
G. “-” button
H. “+” button
I. “SET” button
J. 51mm portafilter
support
K. 58mm portafilter
support
L. Brush
M. Powder box lid
N. Coffee powder jar
Caution：
Power saving mode: If without operation over 3 minutes, the unit enters Power saving mode automatically, press
any button it restarts.
User manual
6
BEFORE FIRST USE
Before using the coffee grinder, wipe the housing and Coffee bean box with a clean damp cloth. Wash the coffee
powder jar and the coffee powder jar lid in hot soapy water, then rinse and dry.
SET THE COFFEE BEAN BOX
To remove the Coffee bean box
1. Make certain the coffee grinder is unplugged.
2. Hold down the Coffee bean box release lever located at the opposite of the grinding size markings.
3. With your other hand, turn the Coffee bean box counter-clockwise until the unlock icon is
aligned with the arrow and lift it up.
To set back the Coffee bean box
1. Make certain the top part of the conical burr is clear of coffee grind residues. If not, you can use
the brush provided to clean around the top part of the burr.
2. Align the unlock icon on the base with the arrow on the Coffee bean box,
3. Hold down the Coffee bean box release lever located at the opposite of the grinding size
markings
4. With your other hand, turn the Coffee bean box clockwise until the lock icon is aligned with
the arrow ,
NOTE: If the coffee bean box is not set properly the coffee grinder won't turn on.
NOTE: The coffee bean box is designed with a trap door system to allow you to secure the coffee
beans inside and allow you to remove the Coffee bean box from the grinder body without
the mess.
User manual
7
SET COFFEE GRIND SIZE
1. Fit the coffee powder jar and its lid in their correct positions.
Check that the assembly is correctly positioned in the body.
2. Open the lid of the coffee bean box and fill the coffee bean
box with desired whole coffee beans. Close the lid, you can
now adjust the coffee grind size.
3. Your coffee grinder has 31 grind size options. To adjust the grind size, rotate the
coffee bean box and adjust from fine to coarse depending of the type of coffee you
are brewing,
NOTE: If the tank is already filled with beans, the coarseness should be set at running
motor. If there are no beans in the tank or grinding block, the coarseness can be set
without running motor.
See chart below:
GRIND SIZE SETTING RECOMMENDATIONS
Coffee Type
Cezve Espresso Siphon Drip Coffee Pour Over French
Press
Grind Size Fine Middle Fine Middle Middle Middle
Coarse Coarse
Grind Setting 1-2 3-5 6-10 11-20 17-25 26-31
OPERATION INSTRUCTIONS
User manual
8
1. Add right amount of coffee beans into the bean holder.
2. Select appropriate coffee bean grinding fineness by rotating the grinding setting ring.
3. Connect the unit with supply power, once power is turned on, the buzzer sounds one time and the LED display
shows "01”, which means entering "Cup mode" and it ready to prepare one cup coffee grinding powder. Press
“ or “ button each time to choice cup, it shows 01.02.03.04....10. After selecting the number of cups
you like, press " " button to start grinding beans. Each cup default setting grinding time is 3 seconds.
a. If you want to stop grinding during operation, press “ ” button one more time.
b. With memory function, when you restart the machine, the display is your last setting if don`t unplug the
power cord. E.g. “05 ” is setting down for this time, and when you start the machine in next time the
display is “05 ”
4. Setting Single Cup Grinding Mode
1) After setting down the cups, press longer “ ” to choose the grinding setting, when display shows
“5.0” and flashes which means entering “Singe Cup Grinding Mode”, and the default setting range is “3.0-
5.0”.
2) Press “ 、” button each time to add or subtract 0.1 seconds, and after 3 times flashes the “Singe
Cup Grinding Mode” setting down. E.g., setting 4.0 seconds for single cup, 2 cups total grinding time is 8
seconds, 10 cups total grinding time is 40 seconds.
5. Connect the portafilter support, the buzzer sounds one time and the LED display shows "8.0 ”, which
means entering " portafilter mode" and “8.0” means grinding time is 8 seconds, press “ 、” button
each time to choice second. Default setting range is “5.0-20.0”, and each time add or subtract 0.1 seconds.
After selecting the seconds of grinding you like, press " " button to start grinding beans.
a. If you want to stop grinding during operation, press “ ” button one more time.
b. With memory function, when you restart the machine, the display is your last setting if you don`t unplug
the power cord. E.g. “10.0 ” is setting down for this time, and when you start the machine in next
time the display is “10.0 ”.
6. Start/Stop button.
a. After setting grinding mode, press “ ” button to grinding coffee beans,
b. If you want to stop grinding during operation, press “ ” button to stop grinding.
CLEANING CONICAL BURRS
Regular cleaning helps the burrs achieve consistent grinding results which is especially important.
User manual
9
Unlock Bean Box Remove Beans Lock Bean Box Run Grinder Util
empty
Remove Bean Box Remove Upper
Burr
Clean Upper Burr
with Cleaning
Brush
Clean Lower Burr
with Cleaning
Brush
Clean Grind
Outlet with Brush
Push Upper Burr
Firmly into
Position
Lock Upper Burr Align Bean Box
into Position
Lock Bean Box
IMPORTANT!
For your appliance to run correctly, make certain that:
■ The lid to the coffee bean box is correctly closed.
■ The coffee powder jar and its lid are correctly placed in the body of the appliance.
■ This appliance is equipped with an overheat protective device. If the appliance overheats, it will switch off
automatically. In this case let it cool down for 30 minutes then restart.
MAINTENANCE
■ To keep all your coffee`s aroma and to avoid a degradation of the ground coffee, empty the
ground coffee container after each use.
■ Always unplug from the power outlet before cleaning.
■ Never place the grinder, power supply cord or plug in water or under running water.
■ Do not use strong detergents or abrasive pads to clean the appliance.
■ Clean the lids and the ground coffee holder in warm, soapy water.
■ To remove the upper burr, hold of the upper mill and turn counter clockwise, then raise it
vertically to remove.
■ Clean the upper burr with the cleaning brush (k).
■ Carefully clean the inside of the coffee bean box with a damp cloth.
■ To replace the upper burr, insert the burr and turn it once in the clockwise direction. For
proper alignment, residual coffee and coffee grounds in the lower burr will need to be
cleared,
User manual
10
TROUBLESHOOTING GUIDE
Code in display
Trouble description
Trouble solution
E1 No bean holder or bean holder is not
connected tightly.
Assembly the bean holder or tighten the bean
holder until the micro switch is closed, once
bean holder is close then error code E1 in
display disappears.
E2
Total operating is 5 cycles,
off
automatically to protect the unit.
Unplug power cord, waiting for it cooling down,
then restart.
Motor is overheating.
Waiting for motor cooling down over 30
minutes and restart.
User manual
11
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection
systems countries)
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that
old household electrical appliances must not be disposed of in the normal household waste stream.
Old appliances must be collected separately in order to optimize the recovery and recycling of the
materials they contain and reduce the impact on human health and the environment.
The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.
• Photo no contractual
• Worried about the quality of his products the manufacturer reserves the right to make modifications without
advance notice
LIVOO
BP 61071
67452 Mundolsheim - FRANCE
/