Model PS-FTWT2655IKB
TV Mount Installation Kit
40kg
88lbs
Read through ALL instructions before commencing installation.
STOP
Retain all packaging in case the bracket needs to be returned.
Contents may vary from photography/illustrations.
You will not need all these parts, so expect there to be some left over depending upon the
specification of your TV.
This product is intended for indoor use only. Use of this product outdoors could lead to
failure and personal injury.
It is the responsibility of the installer to ensure that the mounting wall is of a suitable
standard and void of any services (eg gas, electricity, water etc).
Ø3mm (1/8")
Tools Recommended
Boxed Parts
Ø8mm (5/16")
A
B1 B2
E1
x4
M6 x 30mm
M6
C4
x4
E2
x4
F
x4
D
x8
C2
x4
M4 x 30mm
C3
x4
M6 x 12mm
C1
x4
M4 x 12mm
H
x4
M5
M8 x 12mm
C5
x4
C6
x4
M8 x 30mm
G
x4
M6
B2
B1
C1/C2+E1 C1/C2+E1+D
C3/C4+E2
C5/C6
C3/C4+E2+D
C5/C6+D
E1x4
M6 x 30mm
M6
C4x4
E2x4
Dx8
C2x4
M4 x 30mm
C3x4
M6 x 12mm
C1x4
M4 x 12mm
M5
M8 x 12mm
C5x4 C6x4
M8 x 30mm
1
Top
Ø8mm (5/16")
Fx4
Gx4
Hx4
2
Remove Dust from Hole
Lubricate screw thread with soap
Solid Wall
F
Gx4
2
x4
Ø3mm (5/16")
2
Ensure bracket is in the
centre of the wood stud
Lubricate screw thread with soap
Wood Stud
3
Connect the TV
4
5
Optional
You can slide your TV horizontally by small amounts if required
Lock tilt
/
