2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER.
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of non-
insulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE
CAUTION:
TO PREVENT ELECTRIC SHOCK, ENSURE THE PLUG
IS FULLY INSERTED INTO A MAINS SOCKET
3
WARRANTY AND TECHNICAL SUPPORT
To help you make the most of this product you’ll find a host of information including full product manuals, FAQ,
troubleshooting guides and a support service if you have specific questions, available at our support website:
www.storageoptions.com/support.
This product is also backed by a 12 month warranty in the unlikely event of something going wrong. More
information and warranty registration is available at www.storageoptions.com/warranty.
Support:
www.storageoptions.com/support/
Warranty:
www.storageoptions.com/warranty/
TABLE OF CONTENTS
OVERVIEW
4
PACKAGE CONTENTS
4
CHARGE THE BATTERY
5
SYSTEM OPERATION
5
4.1 – Functionality Overview
4.2 – Insert A Micro SD Card
4.3 – Use The Torch
4.4 – Record Video
4.5 – Capture A Photo
5
6
6
6
7
CONNECTING TO A COMPUTER
7
APPENDIX – PRODUCT SPECIFICATION
7
4
OVERVIEW
BikeCam is versatile, lightweight video camera designed for use by cyclists. Once securely mounted on either your
helmet or your handlebars, BikeCam will capture video footage and sound as you cycle. Perfect if you’re concerned
about safety on your commute to work, or for enthusiasts who want to share their favourite routes or tricks on the
Internet.
BikeCam also incorporates a set of bright LED lights so it doubles as your bike’s front light, for use when riding at
night. No need for separate mountings or to carry around extra accessories when you leave your bike unattended.
A quick-release mechanism also ensures that BikeCam can quickly and easily be removed and reattached.
Very easy to use, capture a record of accidents and incidents
Incorporates bright LED lights, suitable for night time riding
4GB Micro SD Card included (1 hour of footage)
Built-in rechargeable battery, up to 5 hours (video) 10 hours (light)
Lightweight (<3ozs, 85g) with quick-release handlebar mount
PACKAGE CONTENTS
Check the contents of your Bike Camera package against this checklist. If anything is missing or damaged, please do
not use the system, and inform your supplier as soon as possible.
Bike Cam
Mains adapter
Bike mounting bracket
2x rubber shims for mounting bracket
Helmet mount
4GB Micro SD card
USB cable
Instruction manual
5
CHARGE THE BATTERY
The Bike Camera has a built-in rechargeable lithium battery. Before first use, it is advised to charge the battery fully
to preserve its life. There are two methods for charging the battery:
1. Connect it to a mains electrical outlet using the supplied adapter.
2. Connect it to a computer using the supplied USB cable.
While charging, the power LED will flash red.
When charging is complete, the LED will stay solid red.
NOTE
Charging the battery via computer USB port will take much longer than charging from a mains outlet.
SYSTEM OPERATION
The Bike Camera has three key functions:
Video camera
Photo camera
LED Torch
VIDEO
PHOTO
RESOLUTION
720 x 480 @ 30FPS
1280 x 1024
FORMAT
AVI
JPEG
4.1 – FUNCTIONALITY OVERVIEW
It is important to become familiar with the Bike Cam and its key functionality.
NOTE
In the unlikely event that the camera “locks up” or freezes, it can be restored by pushing the “Reset”
button with a thin object such as a pin.
6
4.2 – INSERT A MICRO SD CARD
The camera records video and photo files to Micro SD card. Micro SD cards with up to 16GB capacity are
compatible. A 4GB card is included for your convenience. To insert a Micro SD card:
1. Unscrew the Port Cover (anti-clockwise).
2. Push the Micro SD card into the slot until it clicks in place.
To remove the Micro SD card, push it gently until it clicks,
then release, and it will eject.
3. Replace the Port Cover (screw it on clockwise).
4.3 – USE THE TORCH
To turn the LED torch on:
Press the button.
To turn the LED torch off:
Press the button again.
NOTE
If the torch does not switch on, the battery needs charging. Please refer to section “Charge The Battery”
(page 5) for instructions on how to recharge.
4.4 – RECORD VIDEO
To record video using the built-in camera:
1. Press the button to turn the camera on.
2. Press the button again. The button will
flash slowly to indicate recording is in progress.
To stop recording:
1. Press the button. The button will flash blue quickly.
2. Press and hold the button to switch the camera off.
NOTE
Video recordings are automatically saved as separate files every 5 minutes. Once the Micro SD card is full,
older recordings will be over-written.
7
4.5 – CAPTURE A PHOTO
1. Press the button to turn the camera on.
2. Press the button to capture a photograph.
Each time this button is pressed, another photo
will be captured.
3. Press and hold the button to switch the
camera off.
CONNECTING TO A COMPUTER
If your computer has a built-in Micro SD card reader, you can simply remove the Micro SD card from the Bike Cam
and insert it into the reader. The video and photo files will be available from within “My Computer” as usual.
If you do not have a built-in Micro SD card reader, you can actually use the Bike Cam as a card reader by connecting
it to your computer, using the supplied USB cable.
1. Unscrew the Port Cover (anti-clockwise).
2. Connect the mini USB plug to the mini USB socket under the Port Cover.
3. Connect the full-size USB plug into a spare USB socket on your computer. The camera will appear as a new
drive letter in “My Computer”. Browse this drive to view your recorded video and photographs.
APPENDIX – PRODUCT SPECIFICATION
Bike Cam
Sensor:
¼ inch CMOS
Night Vision:
Up to 8 feet using flashlight
Power:
Built-in lithium-ion battery (800mAh)
Power Adapter:
AC 110 – 240V
Memory:
Up to 16GB SD Card
PC Connection:
Mini USB port
Recording Resolution:
Video: 720 x 480 @ 30fps, Photo: 1280 x 1024
OS Support:
Windows XP / Vista / 7, Linux
/
