2. Computers & electronics
  3. Software
  4. Axis
  5. S2016

Axis S2016, S2008 User manual

  • Hello, I've read the AXIS Camera Station S20 Appliance Series User Manual, and I'm ready to assist you with any questions you have about these network video recorders. This manual covers everything from initial setup and integrating the device into your existing network, to managing the built-in PoE switch, including the setting of IP addresses, adding VLAN and security protocols such as HTTPS. Feel free to ask me about the setup, features, or any other aspect of the AXIS Camera Station S20 series.
  • How do I access the switch's webpage?
    How can I improve security for used ports?
    How do I reset the switch to factory defaults?
    What are the storage options for each model?
AXISCameraStationS20ApplianceSeries
AXISCameraStationS2008Appliance
AXISCameraStationS2016Appliance
AXISCameraStationS2024Appliance
UserManual
AXISCameraStationS20ApplianceSeries
TableofContents
AbouttheAXISCameraStationS20ApplianceSeries.............3
Setupexamples.............................................4
UseAXISCameraStationS20Applianceinanindependentsurveillance
network.......................................................4
UseAXISCameraStationS20Applianceinanexistingnetwork..........5
Managethebuilt-inswitch...................................7
Aboutthebuilt-inswitch.........................................7
Howtoopentheswitch'swebpage.................................7
Howtoreboottheswitch.........................................7
Howtoimprovesecurityforusedports..............................7
Howtoimprovesecurityforunusedports............................8
Howtoconguretheswitch'sIPaddress............................8
HowtoconguretheDHCPserver..................................8
Howtoresettheswitchtofactorydefaultsettings....................9
Howtochangetheswitch'spassword...............................9
Howtobackuptheswitch'ssettings................................9
Howtorestoretheswitch'ssettingstopreviousbackup................9
HowtoaddaVLAN..............................................10
Howtoencrypttrafctotheswitch'swebpage.......................10
Overviewtab...................................................10
PoEtab........................................................12
ACLtab.......................................................13
VLANtab......................................................13
HTTPStab.....................................................14
Networktab....................................................14
Admintab.....................................................15
Productoverview...........................................16
FrontPanelAXISCameraStationS20Series..........................16
BackPanelAXISCameraStationS20Series..........................17
LEDIndicators..................................................17
2
AXISCameraStationS20ApplianceSeries
AbouttheAXISCameraStationS20ApplianceSeries
AbouttheAXISCameraStationS20ApplianceSeries
WithanAxisNetworkVideorecorderyougetaneasy-to-installandreliablesurveillancesolutioninupto4KUltraHDadapted
toAxiswiderangeofnetworkproducts.InsideanetworkvideorecorderfromtheAXISCameraStationS20Applianceseries,
you’llndtwoparts:acomputerandaswitch.Thecomputerpartispreloadedwithallnecessarysoftwareyouneedtocreatea
surveillancesolutionincludingthevideomanagementsoftwareAXISCameraStation.Thebuilt-inPoweroverEthernet(PoE)
switchsimpliesinstallationandmaintenance.
AXISCameraStationS20ApplianceSeriesconsistsofthreedifferentmodels:
•AXISCameraStationS2008Appliance:
8channelclient/serveruptotwomonitors
4TBstorage
IntegratedmanagedPoEswitch
Suitableforinstallationasastandaloneworkstationforofceenvironments,alsopossibletorackmount.
•AXISCameraStationS2016Appliance:
16channelclient/serverforuptotwomonitors
8TBstorage
IntegratedmanagedPoEswitch
Possibletorackmount.
•AXISCameraStationS2024Appliance:
24channelclient/serverforuptotwomonitors
2TBstorage
IntegratedmanagedPoEswitch
Possibletorackmount
3
AXISCameraStationS20ApplianceSeries
Setupexamples
Setupexamples
UseAXISCameraStationS20Applianceinanindependentsurveillancenetwork
Youcancreateanindependentsurveillancenetworkwhichhasnointerconnectivitytoanotherexternalnetwork.Thissetupisabasic
plugandplayinstallation.Thebuilt-inswitch’sDHCPserverisenabledbydefault.AssoonasyouplugthecamerasintothePoE
ports,thecameraswillpoweronandobtainanIPaddressandbeaccessibleviaAXISCameraStation.
DifcultylevelBasic
BenetsDedicatedsurveillancenetworkwithnointerconnectivityto
anotherexternalnetwork
Plugandplayinstallation
LimitationsBandwidth
PoEbudget
Noremoteaccess
ActionsneededChangethedefaultpasswordforthebuilt-inswitch.
RegistertheAXISCameraStationlicense.
4
AXISCameraStationS20ApplianceSeries
Setupexamples
ConnectorsusedPoEenablednetworkconnectors,port1—8
USB3.0connectorx2(forkeyboardandmouse)
VGAorHDMIconnector
ConnectorsNOTusedU1switchuplink
SFP1switchuplink
U2servernetwork
SFP2servernetwork
eSATAconnector
USB2.0connectorx2(frontpanel)
UseAXISCameraStationS20Applianceinanexistingnetwork
Youcancreateasurveillancenetworkwithinanexistingnetwork.Thismeansthatthesurveillancenetworkisseparatedfrom
theexistingnetwork.
DifcultylevelAdvanced
BenetsAbilitytouseanAXISCameraStationClienttoconnectto
S2008overthenetwork.
Networksegregation.
LimitationsMayrequireyoutofollowcorporatenetworkpolices.
5
AXISCameraStationS20ApplianceSeries
Setupexamples
ActionsneededChangethedefaultpasswordforthebuilt-inswitch.
RegistertheAXISCameraStationlicense.
ConnectorsusedPoEenablednetworkconnectors,port1—8
U2servernetwork(forconnectiontonetwork)
(Optional)USB3.0connectorx2(forkeyboardandmouse)
(Optional)VGAorHDMIconnector
ConnectorsNOTusedU1switchuplink
SFP1switchuplink
SFP2servernetwork
eSATAconnector
USB2.0connectorx2(frontpanel)
6
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
Managethebuilt-inswitch
Aboutthebuilt-inswitch
TheAXISCameraStationS20ApplianceSeriescomeswithanintegratedPoweroverEthernet(PoE)switch.Youcongureandmanage
thebuilt-inswitchfromawebpage.
Thepurposeoftheswitchistosegregatetrafconthenetworksothatsecuritycamerasandrelatedtrafcmanagedbytheswitch
(PoEportsandU1networkconnections)arenotsharedwithothernetworks.
Theswitch’spowermanagementfollowtheserules:
•Eachportreservespoweraccordingtotheconnectedpowereddevice’sPoEclass.
•Iftheactualpowerconsumptionforagivenportexceedsthereservedpowerforthatport,itwillshutdown.
•Portswillshutdownwhentheactualpowerconsumptionforallportsexceedsthetotalamountofpowerthatthe
powersupplycandeliver.Theportsarethenshutdownaccordingtotheportsprioritywherealowerportnumber
meanshigherpriority.
Howtoopentheswitch'swebpage
1.Fromyourdesktop,opentheGetStartedapplicationandgotoPoESwitch.
2.ClickGotoPoEswitchwebsite.
3.Loginwithusernameadminandpasswordsystem.
Thersttimeyouloginyou’llbepromptedtochangethepassword.
Note
Youcanalsoopentheswitch’swebpageviaabrowser:entertheswitch’sIPaddress192.168.50.1inthebrowser’s
addresseld.
Howtoreboottheswitch
Important
Whiletheswitchreboots,allconnecteddeviceswilltemporarilyloseconnectionwiththeswitch(includingPoE).
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickRebootswitch.
Howtoimprovesecurityforusedports
YoucanlockaMACaddresstoaportsothatonlytrafccomingfromthatMACaddresswillpass.Thisimprovessecurityandprevents
unauthorizedusersfromconnectingalaptoporotherdevicestothesecuritynetwork.
1.Opentheswitch’swebpage.
2.GotoACL.
3.ForeachportyouwanttolocktheMACaddressfor,clickACLenabled.
Note
ClickEnablealltolocktheMACaddressesforallportsatonce.
7
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
Howtoimprovesecurityforunusedports
Youcandisableportsthatyoudonotuse.Thisimprovessecurityandpreventsunauthorizedusersfromconnectingalaptopor
otherdevicestothesecuritynetwork.
1.Opentheswitch’swebpage.
2.GotoOverview>Portstatus.
3.Foreachportyouwanttodisable,turnoffPortenabled.
Howtoconguretheswitch'sIPaddress
Youcanchangetheswitch’sIPaddressbutformostcamerainstallationswerecommendtousethedefaultsettings.Thereasonfor
thisisthatasurveillancenetworkisnormallyisolatedfromothernetworks,forexampleacorporateLAN.Inthiscase,youwould
onlyusethesurveillancenetworktomanageandcollectsurveillancedevicesanddatafromthevideomanagementsoftware
installedontheserver.
Important
MakesureyourecordthenewIPaddress.Ifyou’veforgottenthenewIPaddress,contactAxissupport.
Note
Thefactorydefaultsettingsare:astaticIPconnectionwithaddress192.168.50.1andasubnetmaskwithaddress
255.255.255.0.
1.Opentheswitch’swebpage.
2.GotoNetwork>Conguration.
3.EnterIPaddress,Subnetmask,Gateway,DNS1andDNS2.
4.ClickSave.
5.Reboottheswitch.
HowtoconguretheDHCPserver
Important
Iftheswitch’sDHCPserverisenabledandtheAXISCameraStationS20Applianceisconnectedtoanexternalnetwork
withitsownDHCPserverviatheU1orSFP1connectors,youwillhaveIPaddressconicts.Thismightresultinthe
corporatenetworknotworking.
YoucanconguretheswitchtouseitsinternalDHCPserverforassigningIPaddressestoconnecteddevices.WhenyouusetheU1
connectiontoallowdevicestoaccessorbeingaccessedbyexternalapplication,youmustspecifythegatewayandDNSaddresses.
1.Opentheswitch’swebpage.
2.GotoNetwork>DHCPserver.
3.EnterStartIPaddress,EndIPaddress,Subnetmask,Gateway,DNS1,DNS2andLeaselength.
4.ClickSave.
5.Reboottheswitch.
8
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
Howtoresettheswitchtofactorydefaultsettings
Note
Ifyou’veforgottenyournewIPaddressorpasswordandcan’taccesstheswitch,contactAxissupport.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickResettofactorydefault.
4.Reboottheswitch.
Howtochangetheswitch'spassword
Youcanchangethedefaultpasswordtoapasswordyouchooseyourself.
Important
Makesureyouselectapasswordyouremember.Ifyou’veforgottenthenewpassword,contactAxissupport.
1.Opentheswitch’swebpage.
2.GotoAdmin>Security.
3.EnterUsernameandPassword.
4.EntertheNewpasswordandconrmit.
5.ClickSave.
6.Reboottheswitch.
Howtobackuptheswitch'ssettings
Note
Theusernameandpasswordarenotincludedinthebackuple.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickBackupsettings.
4.Savethe.gzle.
Howtorestoretheswitch'ssettingstopreviousbackup
Note
Torestoretheswitch’ssettingsyoumustpreviouslyhavecreatedabackuple.
1.Opentheswitch’swebpage.
2.GotoAdmin>Maintenance.
3.ClickBrowse.
4.Selecttheappropriate.gzle.Makesurethatthemodelnameandserialnumberinthelenamematchyourdevice.
5.ClickRestore.Oncethesettingsarerestored,theswitchwillautomaticallyreboottoacceptallrestoredchanges.
9
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
Theusernameandpasswordarenotincludedintherestorele.Youhavetologintotheswitch’swebpagewiththesame
credentialsasbeforeyourestoredthesettings.
HowtoaddaVLAN
WerecommendtocreateaseparateVLANforendpointsotherthandevicesbelongingtothesurveillancesystem.Eachmemberof
theVLANcanonlycommunicatewithothermembersoftheVLANwiththeexceptionoftheswitch’swebpage.EveryVLAN,ifits
endpointisenabledtoincludeanIPaddressinthesamesubnetastheswitch’swebpage,canbrowsetotheswitch’swebpage(ifyou
havethecorrectcredentials).Inthisway,switchadministratorscanneverbelocked-outfromtheswitch.
Example
YoucouldcreateasecondVLANforIPphones,printers,orcomputerssharingthesameswitch.ThedefaultVLAN(VLAN1)wouldthen
beusedstrictlybythesecuritysystem.Inthisway,youpreventtrafcfromaseparatenetworkwithadifferentpurposetomingle
withorgainaccesstosecurityequipmentoraccesssecuritytrafcandviceversa.
Note
Firmwareversion1.4.5.418orhighersupportsVLAN.
1.Opentheswitch’swebpage.
2.GotoVLANandclickAdd.
3.Selectwhichport,uplinkorCPUconnectionsyouwanttoaddtothenewVLAN.
Eachport,uplink,orCPUconnectioncanonlybelongtooneVLANatatime.
4.(Optional)ClicktheVLANnameeldandtypeadescription,forexample“BuildingA,2ndoorcameras”.
5.Reboottheswitch.
Howtoencrypttrafctotheswitch'swebpage
YoucanimplementHTTPStoaddatransportlayerencryption(TLS)ondatathatpassesfromthebrowsertotheswitch.Thisis
importantwhenyouresettheswitch’spasswordtopreventnon-authorizedusersfromobtainingtheswitch’spasswordthrough
unencryptedtrafc.
ThedevicesupportsthreemodesforimplementingHTTPS:HTTPonly,HTTPorHTTPS(basedontheURLselected),orHTTPSonly.
Ifyouwanttoencrypttrafc,werecommendtodisableHTTPandonlyuseHTTPS.
1.Opentheswitch’swebpage.
2.GotoHTTPS>Managecerticate.
3.Generateaself-signedcerticateoruploadmatchingbundle,certicate,andkeyles.
BeforeyoucanactivateHTTPS,theswitchveriesthatthesearevalidandthatthelesmatch.
4.GotoAdministration.
5.SelectHTTPSanddisableHTTP.
6.Reboottheswitch.
Overviewtab
IntheOverviewtab,youndinformationaboutthedevice,resourceusageandportstatus.
PaneFunctionDescription
SysteminformationModelThedevice’smodelname.
10
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
SerialnumberThedevice’sserialnumber.Canbeusefulformaintenanceorwhenyou
needtotrackindividualdevices.
FirmwareversionThermwareversioninstalledonyoudevice.Canbeusefultodetermine
whetheryouneedtoupgradetheswitchrmware.
PortcountThenumberofnetworkportsthedevicesupports,includingacorporate
uplinkport.
MaxPoEThetotalpoweravailableforpoweroverethernet(PoE)devices.
ResourceusageTotalPoEusageDisplayshowmuchpower(inwatts)thePoEdevicesconnectedtothe
switchareusing.
Oncethemaximumpowerhasbeenreached,thedevicescannotprovide
anyfurtherpower.
PoEstatusIndicateswhetherPoEisenabledandhowmanyportshavebeenenabled
tosupportPoE.
ACLstatusIndicateswhetherACL(AccessControlList)isenabledandhowmany
portsareenabledwiththisaddedsecurityfeature.
ACLbindsaspecicMACaddresstoaport,preventingtrafc(sentor
received)fromdeviceswithotherMACaddresses.
PortstatusPort#Theportnumbertowhichtheselecteddeviceisconnected.
LinkstateUpindicatesthatadeviceisconnectedtothisport.
Downindicatesthatnodeviceisconnected.
LinkspeedThecurrentnegotiatedlinkspeedforeachport.
TransmitrateAnoverviewoftrafcloadoneachportshowingtheaveragedataratein
megabitspersecondforoutbounddataontheport.
ReceiverateAnoverviewoftrafcloadoneachportshowingtheaveragedataratein
megabitspersecondforinbounddataontheport.
PowerdrawTheaveragepower(inwatts)beingdrawnviaPoEbythedeviceattached
totheport.
PoEstatusDisplaysifPoEisenabledordisabledforeachport.
ACLstatusDisplaysifACLisenabledordisabledforeachport.
PortenabledAllowsyoutoviewandchangetheenabledordisabledportstatus(the
port'sabilitytoreceiveorsenddata).Thisisseparatefromthelink
statusandPoE.
AdisabledportmayormaynotstillbeprovidingpowertoaPoEdevice,
anditmaystillbephysicallyconnectedtodevice,butitcannotbeused
tosendorreceivedata,eventhoughitslinkstatusmaystillbeUpand
theattacheddeviceisstilldrawingpower.Disablingtheportprevents
anydevicefromaccessingtheswitchornetwork.Portsthatarenotin
useshouldbedisabledforincreasedsecurity.
Uplink1IfU1orSFP1containsanactiveconnectionitwilldisplayUp.
IfU1orSFP1containsannon-activeconnectionitwilldisplayDown.
Themaximumlinkspeedandaveragetransmitandreceivedatain
megabitspersecondhelpyouunderstandtrafcpatternsandverify
operationalstatusofassociatedapplications.
11
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
PoEtab
InthePoEtab,youndformationaboutthesetupandstatusofpoweroverEthernet(PoE)foreachportandforthePoEenabled
devicesasawhole.Thisdataisusefulforsetting,enabling,disabling,andmanagingtheswitch’spowerbudget.
PaneFunctionDescription
PortstatusPort#Theapplianceportnumbertowhichtheselecteddeviceisconnected.
LinkstateUpindicatesthatadeviceisconnectedtothisport.
Downindicatesthatnodeviceisconnected.
PoEmodeTypeofdevicetheswitchhasdetected.Thisisnotcongurable,the
valuesareassignedbytheswitchbasedonitsinteractionandpower
drawoftheconnecteddevice.
PoEmodevaluesareeitherATorAF.ThesevaluesrefertotheIEEE
802.3atorIEEE802.3afstandards.
PoEclassTypeofdevicetheswitchhasdetected.Thisisnotcongurable,the
valuesareassignedbytheswitchbasedonitsinteractionandpower
drawoftheconnecteddevice.
PoEClassvaluesrangefrom0to4andcorrespondtothefollowing
propertiesasdenedintheIEEEstandard:
Cl-
ass
UsageClassica-
tionCurrent
(mA)
Power
Range
(watts)
Class
Description
0Default0-40.44-12.94Classica-
tionunim-
plemented
1Optional9-120.44-3.84Verylow
power
2Optional17-203.84-6.49Lowpower
3Optional26-306.49-12.95Midpower
4Validfor802.3at
(Type2)devices;
notallowedfor
802.3afdevices
36-4412.95-
25.50
Highpower
PowerdrawTheaveragenumberofwattstheconnecteddeviceisconsuming.
PowerlimitDisplaysadefaultlimitbasedonthePoEmodeandclass.
PoEenabledAllowsyoutoviewandchangethePoEenabledordisabledstatustoturn
thePoEtothedeviceonorofffordevices.
DevicesrequiringPoEwillbeturnedoffwhendisabledandthelinkstate
willchangetoDown.
PoEadministrationWattsscaleTheamountofpower(inwatts)drawnbyalldevicescurrentlyconnected
totheswitch.
TotalPoEusageThetotalpowerconsumed(inwattsandpercentages)byallconnected
devices.
Thisinformationishelpfulwheninstallingdevicesandverifyingyour
powerbudget.
12
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
PortsenabledThenumberofportsthatarecurrentlyenabledfordataprovidingpower
overEthernet.
MasterPoEAllowsyoutoenableordisablePoEforallportsinonecommand.
ACLtab
IntheACLtab,youndinformationabouttheaccesscontrollist(ACL)settings.InthistabyoucanforexamplelockaMACaddress
toaportsothatonlytrafccomingfromthatMACaddresswillbepassed.Thisimprovessecurityandpreventsunauthorizedusers
fromattachingalaptoporotherdevicestothesurveillancenetwork.
PaneFunctionDescription
AdministrationPortsenabledThenumberofportsboundtoaspecicMACaddressusingACL.
MasterACLEnablesordisablesACLforallportswithaboundedMACaddress.Only
portswithadiscoveredMACaddressorboundedaddresswillbeaffected.
PortstatusPort#Theportnumbertowhichtheselecteddeviceisconnected.
LinkstateUpindicatesthatadeviceisconnectedtothisport.
Downindicatesthatnodeviceisconnectedtothisport
DiscoveredMAC
addresses
TheswitchautomaticallydetectstheMACaddressofanydevice
connectedtotheportanddisplaysithere.Datatrafcwillonlybe
allowedtoorfromthisMACaddress.
BoundMACaddressesEnablingACLwillbindtheporttothediscoveredMACaddress.Noother
devicewillbeabletocommunicateonthisport.WhenyouenableACL,
ifthereisaDiscoveredMACAddress,itwillmovetotheBoundMAC
Addresscolumn,bindingittothisport.
UnauthorizedMAC
addresses
DisplaystheMACaddressofanyunauthorizedcameraorothernetwork
deviceattemptingtosendtrafcoveranACLenabledport.
PoEstatusDisplaysthecurrentPoEstatus(enabledordisabled).
ACLenabledWhenyouenableACL,ifthereisaDiscoveredMACAddressitwillmove
totheBoundMACAddresscolumn,bindingittothisport.Disabling
ACLclearstheBoundMACAddressvaluesoyoumaybindadifferent
devicetothisport.
VLANtab
IntheVLANtab,youndinformationabouthowtoaddandmanagevirtualLANs(VLAN).
FunctionDescription
IDTheautomaticallygeneratednameoftheVLAN.
VLANnameThemanuallyentereddescriptionoftheVLAN.
SelectallAddsallavailableportstotheVLAN.
1–8
1—16
1—24
Theavailableports.Thenumberdependonthedevicemodel.
U1Uplink1
CPUNetworkconnectiontotheserver’sCPU.
13
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
DHCPTheswitch’sDHCPserverisonlyavailableonVLAN1(default).DHCPwilldisplayasenabled
oncetheswitch’sDHCPserverisactivatedintheNetworktab.
IfotherVLANsrequireDHCPaddressassignment,anexternalDHCPservermustbeprovided
andaccessiblewithinthenetworksofVLANs2orgreater.
DeleteWhenyoudeleteaVLAN,anymembersofthatVLANareimmediatelyreturnedtothe
membershipofVLAN1,thedefaultVLAN.
HTTPStab
IntheHTTPStab,youndinformationaboutcerticatesandHTTPSsettings.
PaneFunctionDescription
AdministrationHTTPTurnonoroffHTTP.
HTTPSTurnonoroffHTTPS.
CurrentcerticateVersion
Serialnumber
Signaturealgorithm
Validfrom
Validto
Subject
Issuer
Fingerprint
Informationabouttothecurrentlyinstalledcerticate(third-partyor
self-signed),ifany.
Toupdatecerticatesoranyoftheinformationinthispaneoncenew
certicatesorkeysareprovided,youmustreboottheswitch.Once
rebooted,theswitchwilldisplaythemostcurrentcerticateinformation.
ManagecerticateCAbundlele
Certicatele
Privatekeyle
Selectcountry
Organization
Commonname
Theseeldsallowyoutogenerateaself-signedcerticateorupload
matchingbundle,certicate,andkeyles.
Networktab
IntheNetworktabyoucanconguretheIPaddressoftheswitchandmanagethebuilt-inDHCPserver.TheDHCPservercontrols
theassignmentofIPaddressesdevicesconnectedtotheswitch’sports.
PaneFunctionDescription
CongurationIPaddressTheIPaddressoftheU1switchconnection.
Youcanopentheswitch’swebpagethroughthisaddress
SubnetmaskThesubnetmaskoftheU1switchconnection.
GatewayThegatewayforaccessingtheU1switchconnection.
DNS1Theprimarydomainnameserverusedbytheswitch.
DNS2Analternatedomainnameserverusedbytheswitch.
14
AXISCameraStationS20ApplianceSeries
Managethebuilt-inswitch
DHCPserverEnabledThestatusoftheDHCPserver.
WhentheDHCPserverisdisabled,youmustassignIPaddressesmanually
tothecamerasoruseanexternalDHCPserveraccessibleviatheU1
networkconnectionforIPassignment.
StartIPaddress
EndIPaddress
WhenDHCPisenabled,youcanchooseaStartIPaddressandEndIP
addressrangeforassignmentofattacheddevices
SubnetmaskThesubnetmaskoftheU1switchconnection.
GatewayThegatewaytoaccesstheU1switchconnection.
DNS1Theprimarydomainnameserverusedbytheswitch.
DNS2Analternatedomainnameserverusedbytheswitch.
LeaselengthThesuggestedlengthoftimeinminutesthattheDHCPserverwillusefor
potentiallyreassigningitspoolofdynamicIPaddresses.Theminimum
leaselengthis60minutes.
Admintab
IntheAdmintab,youndinformationaboutthermwareversion.Inthistabyoucanalsochangethepassword,backupsettings
andreboottheswitch.
PaneFunctionDescription
SecurityUsername
Password
Newpassword
Conrmnewpassword
Theseeldsallowyoutosetthepasswordfortheswitchadministrator.
Theswitchonlyhasoneuser:admin.
Thefactorydefaultpasswordissystem.
FirmwareVersionTheinstalledrmwareversion.
UpgradermwareAllowsyoutoupdatethermwaretoanewversion.
MaintenanceResettofactorydefaultResetsallswitchsettingstofactorydefaultvalues.
RebootswitchRebootstheswitch.Whilerebooting,alldeviceswilltemporarilylose
connectionwiththeswitch(includingPoE).
BackupsettingsStoresabackupofyoursettingsinaleintheDownloadsfolderof
yourbrowser.
RestoresettingsAllowsyoutoselectasavedbackupletorestoresettings.
15
AXISCameraStationS20ApplianceSeries
Productoverview
Productoverview
FrontPanelAXISCameraStationS20Series
1USB2.0connectorx2(notused)
2SystempowerLED
3DiskactivityLED
4StatusLEDs,PoEport1–8,1–16or1–24
16
AXISCameraStationS20ApplianceSeries
Productoverview
BackPanelAXISCameraStationS20Series
1Powerconnector
2PoEenablednetworkconnectors,port1–8,1–16or1–24
3U1switchuplink,RJ45connector
4SFP1switchuplink,SFPconnector
5U2servernetwork,RJ45connector
6USB3.0connectorx2
7SFP2servernetwork,SFPconnector
8eSATAconnector
9HDMIconnector(audiooutputsupported)
10VGAconnector
LEDIndicators
LEDindicatorColorIndication
SystemPowerLEDSteadygreenOn
DiskactivityFlashingyellowRead/write
PoEportsSteadyredPortconnected
17
UserManualVer.M2.15
AXISCameraStationS20ApplianceSeriesDate:November2017
©AxisCommunicationsAB,2016-2017PartNo.T10084515
/