EN
Download complete manual on
www.qees.eu/en/support/plugin
Quick Guide
QEES RETO Plug-in Switch Standard
QEES RETO Plug-in Dimmer Standard
QEES RETO Plug-in Switch Plus
QEES RETO Plug-in Dimmer Plus
QEES product references covered by this Quick Guide:
313-AFW-A1
313-ALW-A1
313-AEW-A1
313-ABW-A2
313-BFW-A1
313-BLW-A1
313-BEW-A1
313-BBW-A2
313-GFW-A1
313-GLW-A1
313-GEW-A1
313-GBW-A2
313-HFW-A1
313-HLW-A1
313-HEW-A1
313-HBW-A2
Going Green with QEES
Congratulations on your new QEES RETO Plug-in. You can
now wirelessly control your appliances or lighting equip-
ment while metering their power consumption*.
All QEES Z-Wave® products are Z-Wave-certied. This
ensures interoperability with Z-Wave-certied products from
other manufacturers.
Read more on how your QEES product can help you go
green at www.qees.eu.
*metering available for Plus edition devices only
QEES Green Living Solution™
RETO Plug-in provides an elegant, efcient and energy-sav-
ing way of controlling your exisiting electrical equipment.
RETO Plug-in Switch can control practically all electrical
products and help reduce your power consumption*, it can
be controlled manually or by remote.
RETO Plug-in Dimmer is a universal dimmer (UNI) capable
of controlling practically all dimmable loads: Energy saving,
LED, halogen and incandescent light bulbs.
Power Plug QEES RETO Plug-in Connected Product
This guide describes the
installation of RETO Plug-in
Switch and RETO Plug-in
Dimmer.
1
Installation
Plug your RETO Plug-in
into an existing wall socket
outlet. The LED will ash
blue while it searches for a
Z-Wave network.
3
Plug the appliance to be
controlled into your RETO
Plug-in.
RETO Plug-in Dimmer is
to be connected only to
dimmable loads.
1
If the connected product
has a separate switch or
on/off-button, please make
sure that it is switched
on.
2
The following guide de-
scribes how to set up and
control your RETO Plug-in
with your MyKey.
Should you have another
Z-Wave controller, please
consult its manual for
conguration.
Press three times quickly
on the button you want to
control the device with –
the LED ashes blue.
Then press RETO Plug-in
product three times quickly
– the LED ashes blue and
it begins linking.
After successful linking
between MyKey and your
RETO Plug-in, both LEDs
will light green for 2
seconds.
2
Conguration
1 2 3
You can control several
products from the same
button on the MyKey. In
order to do so, repeat
conguration steps 1-3.
Your product can now be
controlled by your QEES
MyKey. A short button
press will toggle it; a long
press will dim lights up or
down (applies only to QEES
Dimmers).
Repeat conguration steps
1-3 to congure more
products on your MyKey’s
other buttons.
4 5 6
You can delete a link to a
product from a button on
MyKey. Refer to the online
manual for a complete
description on how to
perform network actions.
7
You can restore the default
settings by pressing four
times quickly - the LED lights
blue. Then press three times
quickly - the LED lights red.
Then hold the button until
the device lights green.
You can learn more about
advanced features like
the timer function, watch
instructional videos and
get conguration advice
for your products at
www.qees.eu/en/video.
Scan the QR code to learn
much more about the pos-
sibilities that your product
has to offer. Download
the product manual at
www.qees.eu/en/support/
plugin.
8 9 10
This Quick Guide covers RETO
Plug-in Switches and RETO Plug-in
Dimmers with socket outlet types
for several European countries
as well as the United States.
However, for ease of reference
only RETO Plug-in Switch or RETO
Plug-in Dimmer with the Schuko
socket type is depicted in this
Quick Guide.
FREU USIT
QEES RETO Plug-in Switch:
Supply Voltage: 100-240 VAC - 50-60 HZ
Standby power: 0,3W
Rated power: Max. 16 A resistive load, 3680 W/230 VAC When using
other type of loads, please refer to the online manual.
Protection rating: IP 20 - Only for indoor use.
Rated current: Max. 16 A
Other: For more information, please refer to the online manual.
QEES RETO Plug-in Dimmer:
Supply voltage: 100-240 VAC - 50-60 HZ
Standby power: 0,4W
Rated power: 400 W/230 VAC - 190W/110VAC When using other
type of loads, please refer to the online manual.
Protection rating: IP 20 - Only for indoor use.
Rated current: Max. 1.66 A
Other: For more information, please refer to the online manual.
This product is made in the China and meets the requirements
for CE marking in accordance with directive 89/336/EEC, 99/05/
EEC, 2006/95/EC and 2011/65/EU.
WEEE
The Waste Electrical and Electronic Equipment Directive
.
The product is marked with the crossed out wheelie bin, and
electronic equipment must not be disposed with other house-
hold waste, but must be collected separately.
3
Technical
specication
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
LG F1289TD User manual
-
LG WD-10600SDS User manual
-
-
Biamp SCM7500 Stereo Club Mixer Operator User manual
-
Kenwood B59-1990-00 User manual
-
Brother LS-2720 User manual
-
-
-
Bushnell 78-8846 User manual
-
Tasco Spacestation 49076525/49114675 User manual