QEES 313-BBW-A2 Quick Manual

Category
Dimmers
Type
Quick Manual

This manual is also suitable for

EN
Download complete manual on
www.qees.eu/en/support/plugin
Quick Guide
QEES RETO Plug-in Switch Standard
QEES RETO Plug-in Dimmer Standard
QEES RETO Plug-in Switch Plus
QEES RETO Plug-in Dimmer Plus
QEES product references covered by this Quick Guide:
313-AFW-A1
313-ALW-A1
313-AEW-A1
313-ABW-A2
313-BFW-A1
313-BLW-A1
313-BEW-A1
313-BBW-A2
313-GFW-A1
313-GLW-A1
313-GEW-A1
313-GBW-A2
313-HFW-A1
313-HLW-A1
313-HEW-A1
313-HBW-A2
Going Green with QEES
Congratulations on your new QEES RETO Plug-in. You can
now wirelessly control your appliances or lighting equip-
ment while metering their power consumption*.
All QEES Z-Wave® products are Z-Wave-certied. This
ensures interoperability with Z-Wave-certied products from
other manufacturers.
Read more on how your QEES product can help you go
green at www.qees.eu.
*metering available for Plus edition devices only
QEES Green Living Solution™
RETO Plug-in provides an elegant, efcient and energy-sav-
ing way of controlling your exisiting electrical equipment.
RETO Plug-in Switch can control practically all electrical
products and help reduce your power consumption*, it can
be controlled manually or by remote.
RETO Plug-in Dimmer is a universal dimmer (UNI) capable
of controlling practically all dimmable loads: Energy saving,
LED, halogen and incandescent light bulbs.
Power Plug QEES RETO Plug-in Connected Product
This guide describes the
installation of RETO Plug-in
Switch and RETO Plug-in
Dimmer.
1
Installation
Plug your RETO Plug-in
into an existing wall socket
outlet. The LED will ash
blue while it searches for a
Z-Wave network.
3
Plug the appliance to be
controlled into your RETO
Plug-in.
RETO Plug-in Dimmer is
to be connected only to
dimmable loads.
1
If the connected product
has a separate switch or
on/off-button, please make
sure that it is switched
on.
2
The following guide de-
scribes how to set up and
control your RETO Plug-in
with your MyKey.
Should you have another
Z-Wave controller, please
consult its manual for
conguration.
Press three times quickly
on the button you want to
control the device with –
the LED ashes blue.
Then press RETO Plug-in
product three times quickly
– the LED ashes blue and
it begins linking.
After successful linking
between MyKey and your
RETO Plug-in, both LEDs
will light green for 2
seconds.
2
Conguration
1 2 3
You can control several
products from the same
button on the MyKey. In
order to do so, repeat
conguration steps 1-3.
Your product can now be
controlled by your QEES
MyKey. A short button
press will toggle it; a long
press will dim lights up or
down (applies only to QEES
Dimmers).
Repeat conguration steps
1-3 to congure more
products on your MyKey’s
other buttons.
4 5 6
You can delete a link to a
product from a button on
MyKey. Refer to the online
manual for a complete
description on how to
perform network actions.
7
You can restore the default
settings by pressing four
times quickly - the LED lights
blue. Then press three times
quickly - the LED lights red.
Then hold the button until
the device lights green.
You can learn more about
advanced features like
the timer function, watch
instructional videos and
get conguration advice
for your products at
www.qees.eu/en/video.
Scan the QR code to learn
much more about the pos-
sibilities that your product
has to offer. Download
the product manual at
www.qees.eu/en/support/
plugin.
8 9 10
This Quick Guide covers RETO
Plug-in Switches and RETO Plug-in
Dimmers with socket outlet types
for several European countries
as well as the United States.
However, for ease of reference
only RETO Plug-in Switch or RETO
Plug-in Dimmer with the Schuko
socket type is depicted in this
Quick Guide.
FREU USIT
QEES RETO Plug-in Switch:
Supply Voltage: 100-240 VAC - 50-60 HZ
Standby power: 0,3W
Rated power: Max. 16 A resistive load, 3680 W/230 VAC When using
other type of loads, please refer to the online manual.
Protection rating: IP 20 - Only for indoor use.
Rated current: Max. 16 A
Other: For more information, please refer to the online manual.
QEES RETO Plug-in Dimmer:
Supply voltage: 100-240 VAC - 50-60 HZ
Standby power: 0,4W
Rated power: 400 W/230 VAC - 190W/110VAC When using other
type of loads, please refer to the online manual.
Protection rating: IP 20 - Only for indoor use.
Rated current: Max. 1.66 A
Other: For more information, please refer to the online manual.
This product is made in the China and meets the requirements
for CE marking in accordance with directive 89/336/EEC, 99/05/
EEC, 2006/95/EC and 2011/65/EU.
WEEE
The Waste Electrical and Electronic Equipment Directive
.
The product is marked with the crossed out wheelie bin, and
electronic equipment must not be disposed with other house-
hold waste, but must be collected separately.
3
Technical
specication
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

QEES 313-BBW-A2 Quick Manual

Category
Dimmers
Type
Quick Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI