Slip your Fire Pit Cover over
the top of your fire pit then
pull the cover down all
around.
Your cover has an elastic
cord in the bottom hem that
helps keep the cover on in
windy conditions.
If your fire pit has legs,
you can further secure the
cover by putting the legs
through the StayOn cord loop
along the bottom hem at the
corners.
Clean your cover with a soft
brush and luke-warm water.
DO NOT USE SOAP as it
may remove the protective
coatings added by the factory.
Air dry.
This cover is factory
warranted for workmanship
and materials for one year
after purchase.
Fire Pit Cover
07cH57_6683
58992
-
1
