2. Classic Accessories
  3. 58992

Classic Accessories 58992 Owner's manual

  • Hello! I've reviewed the instructions for the Fire Pit Cover. This document outlines the installation process, emphasizing the use of the elastic cord and StayOn loops for secure fitting. It also provides important cleaning instructions, noting to avoid soap to preserve the protective coatings. I'm ready to assist you with any questions you have about this product.
  • How to install Fire Pit Cover?
    How to clean Fire Pit Cover?
    How to further secure the cover?



Slip your Fire Pit Cover over
the top of your fire pit then
pull the cover down all
around.
Your cover has an elastic
cord in the bottom hem that
helps keep the cover on in
windy conditions.
If your fire pit has legs,
you can further secure the
cover by putting the legs
through the StayOn cord loop
along the bottom hem at the
corners.

Clean your cover with a soft
brush and luke-warm water.
DO NOT USE SOAP as it
may remove the protective
coatings added by the factory.
Air dry.

This cover is factory
warranted for workmanship
and materials for one year
after purchase.
Fire Pit Cover
07cH57_6683
58992
/