Harley Benton PA-100 Power Attenuator
Harley Benton PA-100 Power Attenuator is a power soak for tube amplifiers, ideal for use in rehearsal rooms, recording studios, and on stage. It features an input power handling of max. 100 watts and inputs for 4 Ω, 8 Ω, and 16 Ω. The outputs include a low-impedance XLR output for connecting a mixing console or recording device, a line output for connecting an effects processor or power amp, and a speaker output for connecting a passive speaker box.
The PA-100 also has a silent fan, an LED overload indicator, and controls for adjusting the signal attenuation at the line out and speaker out. It can be used as a load resistor when operated with tube amps without a speaker box.
Harley Benton PA-100 Power Attenuator
Harley Benton PA-100 Power Attenuator is a power soak for tube amplifiers, ideal for use in rehearsal rooms, recording studios, and on stage. It features an input power handling of max. 100 watts and inputs for 4 Ω, 8 Ω, and 16 Ω. The outputs include a low-impedance XLR output for connecting a mixing console or recording device, a line output for connecting an effects processor or power amp, and a speaker output for connecting a passive speaker box.
The PA-100 also has a silent fan, an LED overload indicator, and controls for adjusting the signal attenuation at the line out and speaker out. It can be used as a load resistor when operated with tube amps without a speaker box.
Harley Benton PA-100 Power Attenuator
Harley Benton PA-100 Power Attenuator is a power soak for tube amplifiers, ideal for use in rehearsal rooms, recording studios, and on stage. It features an input power handling of max. 100 watts and inputs for 4 Ω, 8 Ω, and 16 Ω. The outputs include a low-impedance XLR output for connecting a mixing console or recording device, a line output for connecting an effects processor or power amp, and a speaker output for connecting a passive speaker box.
The PA-100 also has a silent fan, an LED overload indicator, and controls for adjusting the signal attenuation at the line out and speaker out. It can be used as a load resistor when operated with tube amps without a speaker box.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI