Hunter Fan 50029 Owner's manual

Type
Owner's manual

This manual is also suitable for

Hunter Fan 50029 is a versatile ceiling fan with a variety of features to keep you comfortable in your home. With its powerful motor, it can efficiently circulate air in rooms up to 300 square feet, making it ideal for living rooms, bedrooms, and offices. The fan's reversible motor allows you to change the direction of the blades to create a cooling breeze in the summer or a warm, comforting flow of air in the winter, ensuring year-round comfort.

Hunter Fan 50029 is a versatile ceiling fan with a variety of features to keep you comfortable in your home. With its powerful motor, it can efficiently circulate air in rooms up to 300 square feet, making it ideal for living rooms, bedrooms, and offices. The fan's reversible motor allows you to change the direction of the blades to create a cooling breeze in the summer or a warm, comforting flow of air in the winter, ensuring year-round comfort.

www.ventiladoreshunter.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
ENGLISH
Important Instructions: Keep Instructions for future use
1
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
PAG E
8
PAG E
12
PAG E
5
PAG E
7
30 inches
7 feet
PAG E
2
What to Expect with
Your Installation
Ceiling Bracket
Ladder
PAG E
3
Tools Needed
Wiring CanopyDownrodPreparation
Table of Contents
PAG E
13
Mounting Options
PAG E
20
Maintenance &
Cleaning
Troubleshooting
?
?
?
PAG E
21
Warranty Statement
PAG E
19
PAG E
15
Blades Switch Housing
PAG E
14
PAG E
4
Congratulations on purchasing your new Hunter®
ceiling fan! It will provide comfort and performance
in your home or ofce for many years. This installation
and operation manual contains complete instructions
for installing and operating your fan.
We are proud of our work and appreciate the
opportunity to supply you with the best ceiling fan
available anywhere in the world.
Light Kit
PAG E
16
www.hunterfan.com.br
2
MD511-01 • 09/30/14 • © Hunter Fan Company
What to Expect with Your Installation
w.1 - To reduce the risk of re, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet
box marked acceptable for fan support of 31.8 kg and use the
mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the circuit
breakers to the outlet box and associated wall switch location. If
you cannot lock the circuit breakers in the off position, securely
fasten a prominent warning device, such as a tag, to the service
panel.
w.3 - To reduce the risk of re, electrical shock, or motor damage,
use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades, or
cleaning the fan. Do not insert foreign objects in between rotating fan
blades.
w.5 - This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
people with a lack of experience and knowledge, unless they have
received instructions regarding the use of the device or under the
supervision of a person responsible for their safety.
w.6 - It is recommended that children be supervised to ensure that
they are not using the appliance improperly
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualied electrician.
c.2 - Use only Hunter replacement parts.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
0,50 meters
from blade tip to
nearest wall or
obstruction
2,3 meters
from bottom
edge of blade to
the oor
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
Must be able to
secure the fan to
building structure or
fan-rated outlet box.
Do not use a plastic
outlet box.
Select a downrod length
1
2
3
Standard Downrod
for ceilings 2,4 -3 meters high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 3 meters or higher
Use ONLY Hunter
Ceiling Fan branded
accessory light kits.
www.hunterfan.com.br
Tools Needed
Ladder
Pliers Wire Strippers
Screwdrivers
Power Drill
(optional)
3.5 mm Drill
Bit (optional)
8 mm Drill Bit
(optional)
If mounting to a support structure, you
will also need these tools.
Hammer
(optional)
9 mm Wrench
3
MD511-01 • 09/30/14 • © Hunter Fan Company
4
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Hang your fan by a standard downrod
(included) or use a shorter downrod (sold
separately) for Low-Prole Mounting.
Mounting Options
Note: Do not hang the fan from a
ceiling that is angled greater than 34°
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
Carefully choose the installation location
that allows for optimal air ow.
The support structure must be able to support 5
times the weight of the fan. The weight of the fan is
located on the product packaging.
You will need a longer downrod (sold
separately) to hang the fan from a
vaulted or angled ceiling.
If you have a at ceiling: If you have an angled ceiling:
5
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Ceiling Bracket
OFF
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before installing your fan, disconnect the
power by turning off the circuit breakers to the outlet box associated with the
wall switch location.
Turn Power
Remove all four mounting isolators.
Align the tapered mounting holes in the
ceiling plate with the holes in the ceiling
bracket. Install the four ceiling plate
screws found in the hardware bag and
secure with the ange nuts using an 9 mm
wrench. Hold the ceiling bracket assembly
up to the outlet box and mark the screw
locations. To mount to support structure,
also mark the ceiling for drilling pilot holes.
Install the ceiling plate gasket onto the
ceiling plate. The four holes in the ceiling
plate should lineup with the four posts
in the gasket.
Tapered
Mounting
Holes
Ceiling
Plate
Gasket
Post
Ceiling
Plate
Ceiling
Plate
Flange
Nuts
Mounting
Isolator
Ceiling
Bracket
Ceiling Plate
Screws
For angled ceilings, point
opening toward peak.
6
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Ceiling Bracket
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 3.5 mm pilot
holes in support structure
to aid in securing ceiling
bracket with hardware
found in the hardware
bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg or less.
Note: Do not mount ceiling fan
to a plastic outlet box.
Use concrete anchors (included)
when securing to support structure
with approved outlet box in a concrete
ceiling. Drill 8 mm pilot holes in
support structure. Hammer the M6
expansion anchors into the holes until
the ends are ush with the ceiling.
Install the washer, isolator, and nut
found in the hardware bag to
the expansion anchors.
Use the wood screw to poke holes through
the rubber gasket in order to install the
ceiling bracket assembly to your support
structure or ceiling fan-rated outlet box.
www.hunterfan.com.br
Ceiling Bracket (continued)
Preparation
D
I
S
C
A
R
D
K
E
E
P
!
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
Time Saver Tip: Get a helper
to insert grommets, found in the
hardware bag, into the blades
while you’re doing the next
couple of steps.
7
MD511-01 • 09/30/14 • © Hunter Fan Company
8
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Downrod
S lide
S lide
1 2 3 4 5
678910
Sold Separately
Longer
Downrod
for angled
ceilings or
ceilings 3 m or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 2,4-3 m
high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
Steps 6-10 to reassemble with new pipe
Included
(pre-assembled)
Sold Separately
9
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Hand tighten the downrod (at least 4-5 full
turns) until it stops.
KEEP!
Remove the pre-installed setscrew so that
the downrod can be inserted.
K
E
E
P
!
Slide the adapter cover onto the downrod
until it rests against the hanger ball.
Adapter
Cover
Hanger
Ball
Note: e adapter cover is not used
for low-profile mounting.
9
Downrod (continued)
10
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Downrod (continued)
If the setscrew is not tightened
securely, the fan may fall.
20 cm 1 cm
20 cm
1 cm
C
U
T
&
S
T
R
I
P
(not to scale)
The wires can be cut, but leave
at least 20 cm extending from
the top of the downrod.
Tighten the setscrew with pliers.
DO NOT HAND TIGHTEN.
Lower the adapter cover until it rests
ush against the motor housing.
11
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Downrod (continued)
DO NOT PICK THE FAN UP BY THE CANOPY
OR WIRES. Place the downrod ball into the slot
in the ceiling bracket.
Put the wires and downrod through the canopy.
Let the canopy sit loosely on top of the fan.
Note: Fan style may vary.
12
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Wiring
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Refer to CAUTION c.1 on pg. 2
F
R
O
M
F
A
N
F
R
O
M
C
E
I
L
I
N
G
B
R
A
C
K
E
T
F
R
O
M
F
A
N
Using an orange wire
connector from the
hardware bag, connect
the 3 grounding wires
(green, green/yellow
stripe, or bare copper)
coming from the
ceiling, downrod, and
hanging bracket.
(Grounding)
Green/Yellow
Stripe
Green/Yellow
Stripe
Blue
Brown
(Grounded)
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
Using the orange wire
connectors from the
hardware bag, connect the
brown wire (ungrounded)
from the ceiling to the
brown and the black with
white stripe wires from the
fan. Connect the blue wire
(grounded) from the ceiling to
the blue wire from the fan.
Using the orange wire
connectors from the
hardware bag, connect the
blue wire (grounded) from
the ceiling to the blue wire
from the fan.
Connect the brown wire
(ungrounded) from the
ceiling to the brown wire
from the fan. Connect the
second (ungrounded)
wire from the ceiling to
the black with white stripe
wire from the fan.
F
R
O
M
F
A
N
Blue
(Ungrounded)
Brown
Black with white stripe
(Grounded)
F
R
O
M
C
E
I
L
I
N
G
(Ungrounded)
For Dual Switches
For a Single Switch
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
C
E
I
L
I
N
G
Bl
a
c
k
w
i
t
h
White Stripe
(Ungrounded)
13
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Canopy
Lift the canopy into place so that
the screw holes are aligned.
Position the canopy so that, when
lifted into place, the canopy ts into
the hanging bracket as shown.
Screw
Holes
Insert the two canopy screws
found in the hardware bag.
Note: Fan style may vary.
14
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the nishes.
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Insert grommets, found in the hardware
bag, into the holes in the blades, then
secure each blade to a blade iron with
screws found in the hardware bag.
Lightly attach the blade irons to the
motor with the blade iron armature
screws, then securely tighten after both
screws are attached.
Note: You need ten screws to complete
this step. Additional screws might be
found in the hardware bag.
15
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Make sure the upper switch housing is securely attached to
the mounting plate. Failure to properly secure all 3 assembly
screws could result in the switch housing xture falling.
Switch Housing
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Align the screw holes in the switch
housing gasket and the motor housing.
Screw two switch housing assembly
screws from the hardware bag halfway
into the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in the
hardware bag, into place and then
tighten all three screws.
16
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Light Kit
Install a 14W CFL bulb (sold separately) into
the E27 socket. When necessary, replace with
bulb of same wattage.
To reinstall the globe assembly, align the posts on
the globe assembly with the holes in the shroud.
Make sure that the chain holes in the globe
assembly also line up with the chain holes in the
shroud. Lift the globe and posts until the threaded
end of the posts are visible through the shroud.
Install the three acorn nuts onto the posts so that
the light kit is secured to the shroud.
Make sure the globe assembly is securely attached
to the shroud. Failure to properly secure all three
acorn nuts could result in the light xture falling.
Post
Acorn
Nut
Acorn
Nut
Unscrew the three acorn nuts by hand
and carefully detach the globe assembly
from the shroud.
17
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Light Kit (continued)
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Lift the lower switch housing up until its
screw holes are aligned with the screw holes
in the upper switch housing.
Install the three switch housing screws
found in the hardware bag.
Screw
Holes
Connect the plugs from the upper and lower
switch housings. Make sure to line up the
colored markings on the connectors.
18
www.hunterfan.com.br
MD511-01 • 09/30/14 • © Hunter Fan Company
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
See next page for fan
operation instructions.
Feed the chains from the fan and the light
switch down through the holes in the shroud.
Connect the appropriate pull chain pendant
to each of the short chains coming from the
nial and nial cap. The fan pull chain controls
the speed: from high to off. The light pull
chain controls the light xture: on and off.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Hunter Fan 50029 Owner's manual

Type
Owner's manual
This manual is also suitable for

Hunter Fan 50029 is a versatile ceiling fan with a variety of features to keep you comfortable in your home. With its powerful motor, it can efficiently circulate air in rooms up to 300 square feet, making it ideal for living rooms, bedrooms, and offices. The fan's reversible motor allows you to change the direction of the blades to create a cooling breeze in the summer or a warm, comforting flow of air in the winter, ensuring year-round comfort.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI