SCAN 68-1 Assembly And Instruction Manual

68-1
SCAN
Brand
SCAN
Model
68-1
Category
Stoves
Type
Assembly And Instruction Manual
UK – Scan 68
ASSEMBLY AND INSTRUCTION MANUAL SCAN 68
CONGRATULATIONS ON YOUR NEW
SCAN WOOD-BURNING STOVE
You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that
you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that
you follow our advice and instructions.
Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.
Scan 68-1
Wall hung model
Without side windows
Black mouldings
Scan 68-2
Wall hung model
Without side windows
Aluminium mouldings
Scan 68-3
Pedestal
Without side windows
Black mouldings
Scan 68-4
Pedestal
Without side windows
Aluminium mouldings
Scan 68-5
Portal
Without side windows
Black mouldings
Scan 68-6
Portal
Without side windows
Aluminium mouldings
Scan 68-7
Wall hung model
With side windows
Black mouldings
Scan 68-8
Wall hung model
With side windows
Aluminium mouldings
Scan 68-9
Pedestal
With side windows
Black mouldings
Scan 68-10
Pedestal
With side windows
Aluminium mouldings
Scan 68-11
Portal
With side windows
Black mouldings
Scan 68-12
Portal
With side windows
Aluminium mouldings
Scan 68-13 LB
Low Base
Without side windows
Black mouldings
Scan 68-14 LB
Low Base
Without side windows
Aluminium mouldings
Scan 68-13
Steel sides
Without side windows
Black mouldings
Scan 68-14
Steel sides
Without side windows
Aluminium mouldings
Scan 68-13 HT
High Top
Without side windows
Black mouldings
Scan 68-14 HT
High Top
Without side windows
Aluminium mouldings
Scan 68-15 LB
Low Base
Without side windows
Black mouldings
Scan 68-16 LB
Low Base
Without side windows
Aluminium mouldings
Scan 68-15
Soapstone
Without side windows
Black mouldings
Scan 68-16
Soapstone
Without side windows
Aluminium mouldings
Scan 68-15 HT
High Top
Soapstone
Without side windows
Black mouldings
Scan 68-16 HT
High Top
Soapstone
Without side windows
Aluminium mouldings
SCAN 68-SERIEN
TABLE OF CONTENTS
 ¬
MOUNTING THE UK-SCREW 43
 ¬
TECHNICAL DATA 4
Installation ....................................................................................... 4
Safety ................................................................................................. 4
Technical data and dimensions ................................................. 4
Dimension ......................................................................................... 5
Type plate........................................................................................11
Product registration number ...................................................12
 ¬
ASSEMBLY 12
Additional accessories ...............................................................12
Loose parts.....................................................................................12
Disposal of packaging ................................................................12
Removal of packaging ................................................................13
Mounting of the burn chamber on the pedestal basel ....14
Mounting of the burn chamber on the portal basel .........15
Mounting of the door assembly ..............................................16
Mounting of Wall-hung model .................................................. 17
Mounting of the wall fitting on the stove ............................18
Removal of the self-closing door spring..............................21
Mounting of external air supply on the wall fitting .........21
Fitting natural stone ...................................................................22
Mounting of high top ...................................................................23
High Top for natural stone ........................................................23
Wall mounting kit for Scan 68 with high top ......................24
Heat-storage stone .....................................................................25
Height adjustment of stove ......................................................26
Connecting piece ..........................................................................26
Existing chimney and pre-fabricated element chimney .27
Connection between stove and steel chimney ..................27
Requirements for chimney .......................................................27
Connection with 90° elbow pipe .............................................27
Load-bearing subsurface ..........................................................28
Floor plate ......................................................................................28
Positioning your wood-burning stove ...................................28
Distance to furniture ..................................................................28
Distance to flammable materials, ..........................................29
Distance to firewall .....................................................................30
 ¬
INSTRUCTIONS FOR USE 31
CB technology (Clean Burning) ................................................31
Primary air ......................................................................................31
Secondary air .................................................................................31
Baffle plates ..................................................................................31
Ash container .................................................................................31
The Clean Air Act 1993 and Smoke Control Areas ..........31
Refueling on to a low fire bed ..................................................32
Warning about over-firing .........................................................32
Operation with door left open .................................................32
Dampers left open .......................................................................32
Fresh air intake .............................................................................33
Closed combustion system ......................................................33
 ¬
INSTRUCTIONS FOR HEATING 34
Environmentally-friendly firing ..............................................34
Lighting ............................................................................................34
“Top down” lighting.......................................................................34
Continuous firing ..........................................................................35
Firing in the spring or autumn ..................................................35
The function of the chimney .....................................................35
Using your stove in various weather conditions ...............35
General notes ................................................................................35
Chimney fire ...................................................................................35
 ¬
HANDLING FUEL 36
Selecting wood/fuel ....................................................................36
Preparation ....................................................................................36
Storing .............................................................................................36
Moisture ..........................................................................................36
Use of the following as fuel is illegal ....................................36
Calorific value of the wood .......................................................36
 ¬
MAINTAINANCE 37
 ¬
TROUBLESHOOTING 40
 ¬
WARRANTY 41
 ¬
NOTES 42
4
TECHNICAL DATA AND DIMENSIONS
Materials
Steel plate
Cast iron
Galvanised sheet
Vermicolite
Surface treatment Senotherm
Max. wood length ca. 33 cm
Weight Scan 68-1/2/7/8 ca. 98 kg
Weight Scan 68-3/4/9/10 ca. 105 kg
Weight Scan 68-5/6/11/12 ca. 107 kg
Weight Scan 68-13/14 ca. 110 kg
Weight Scan 68-13/14 LB ca. 100 kg
Weight Scan 68-15/16 ca. 190 kg
Weight Scan 68-15/16 LB ca. 170 kg
Connecting piece internal diameter 144 mm
Connecting piece external diameter 148 mm
Approval type Intermittent fuelling*
Intermittent operation in this context means normal use
of a wood-burning stove. In other words, you should let
the fire die down until only the embers are left before
refueling.
This stove is produced in accordance with type approval
for the product, which also covers the product’s Assembly
and Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan.dk
*
PLEASE NOTE!
You get the best use of the stove
by using a top-down lighting.
See "instruction for heating"
TECHNICAL DATA
INSTALLATION
¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local
building regulations as well as the information provided in this Assembly and Instruction Manual.
¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition
you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning.
¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your
Scan Dealer will be able to recommend a qualified fitter in your area. For information on Scan Dealers, please go to
www.scan.dk.
SAFETY
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not func-
tioning as intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This
could also be the case if parts that are necessary for the operation and safety of the stove are dismantled or removed.
Test in compliance with EN 13240
CO Emission at 13% O
2
0,04 %
CO
Emission at 13% O
2
556 mg/Nm
3
Dust @ 13% O
2
14 mg/Nm
3
No
x
@ 13% O
2
85 mg/Nm
3
Efficiency 79 %
Energy efficiency index 105,6
Energy efficiency class A
Nominel output 5 kW
Chimney temperature EN 13240 265 °C
Amount of smoke 5,3 g/sek
Sub-pressure EN 13240 12 Pa
Recommended sub-pressure in
connecting piece
17 Pa
Required combustion air supply 16,2 m
3
/h
Fuel Wood
Fuel consumption 1,6 kg/h
Amount of fuel 1,4 kg
Test in compliance with EN 13240
in smoke restricted areas
Efficiency 80 %
Energy efficiency index 107
Energy efficiency class A+
Nominel output 5,5 kW
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068002.idw
90068002
Målskitse pedesal
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1272
500
192
179
371
611 0*
326***
1255**
350
130*** 220***
250***
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068004.idw
90068004
Målskitse wall
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
794
500
400
371
221
179
400
776**
681*
250***
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068004.idw
90068004
Målskitse wall
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
794
500
400
371
221
179
400
776
681
250
B A
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068002.idw
90068002
Målskitse pedesal
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1272
500
192
179
371
611 0
326
1255
350
130 220
250
B A
C
C
5
DIMENSION SKETCH SCAN 68-3, 68-4, 68-9 AND 68-10 (PEDESTAL)
DIMENSION
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
SCAN 68-1, 68-2, 68-7 AND 68-8 (WALL HUNG MODEL)
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068001.idw
90068001
Målskitse Portal
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1222
500
250***
371
192
179
1110*
1205**
350
175***
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068001.idw
90068001
Målskitse Portal
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1222
500
250
371
192
179
1110
1205
350
175
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068001.idw
90068001
Målskitse Portal
16-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1222
500
250
371
192
179
1110
1205
350
175
B A
C
C
6
DIMENSION SKETCH SCAN 68-5, 68-6, 68-11 AND 68-12 (PORTAL)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam
90068093
simpel portal
18-03-2015
sr
Scan 68
VÆGT:
AREAL:
N/A
N/A
1222
500
371
192
179
1110*
1205**
219***
147***
276***
250***
1110
1205
219
147
276
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam
90068093
simpel portal
18-03-2015
sr
Scan 68
VÆGT:
AREAL:
N/A
N/A
1222
500
371
192
179
1110
1205
219
147
276
250
B A
C
C
C
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 68\90068155.idw
9006815508-03-2017
pcj
Weight:
Area:
108,41 kg
N/A
500
250***
3
7
1
1
7
9
1
9
2
1
0
0
0
8
8
9
*
9
8
3
*
*
147***
219***
8
8
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 68\90068155.idw
9006815508-03-2017
pcj
Weight:
Area:
108,41 kg
N/A
500
250
3
7
1
1
7
9
1
9
2
1
0
0
0
8
8
9
9
8
3
147
219
8
8
B A
C C
7
DIMENSION SKETCH 68-13 AND 68-14 (STEEL SIDES)
DIMENSION SKETCH SCAN 68-13 AND 68-14LB (LOW BASE)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068080.idw
90068080
HT
02-07-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1650
371
276
1110*
1205**
250***
147***
179
192
366
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068080.idw
90068080
HT
02-07-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1650
371
276
1110
1205
250
147
179
192
366
B A
C
C
8
DIMENSION SKETCH SCAN 68-13 AND 68-14 HT (HIGH TOP)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068136.idw
90068136
målskitse fedtsten
05-10-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1
2
5
7
586
3
7
1
1
9
2
1
7
9
1
2
0
5
1
1
1
0
2
7
6
147
219
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068136.idw
90068136
målskitse fedtsten
05-10-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1
2
5
7
586
3
7
1
1
9
2
1
7
9
1
2
0
5
1
1
1
0
2
7
6
147
219
B A
C
C
Stove:
Path:
Articlenumber:
Material:
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
Drawing
number:
Name:
C:\Working Folder\Designs\Scan 68\90068155.idw
9006815508-03-2017
pcj
Weight:
Area:
108,41 kg
N/A
500
250***
3
7
1
1
7
9
1
9
2
1
0
0
0
8
8
9
*
9
8
3
*
*
147***
219***
8
8
NAVN:
STI:
M3 NR.:
MATERIALE:
DATO:
SIGN:
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068160.idw
90068160
Scan 68-15,16 low
10-07-2017
pcj
VÆGT:
AREAL:
108,41 kg
N/A
DIM.:
Scan A/S
1
0
3
5
3
7
1
1
7
9
1
9
2
586
294
219
147
8
8
889
983
B A
C
C
9
DIMENSION SKETCH SCAN 68-15 AND 68-16 (SOAPSTONE)
DIMENSION SKETCH SCAN 68-13 AND 68-14 (SOAPSTONE + LOW BASE)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068137.idw
90068137
målskitse fedtsten HT
10-07-2017
hms/pcj
Scan 68
VÆGT:
AREAL:
N/A
N/A
1
6
8
5
586
1
2
0
5
1
1
1
0
2
7
6
147
219
3
7
1
1
9
2
1
7
9
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068137.idw
90068137
målskitse fedtsten HT
10-07-2017
hms/pcj
Scan 68
VÆGT:
AREAL:
N/A
N/A
1
6
8
5
586
1
2
0
5
1
1
1
0
2
7
6
147
219
3
7
1
1
9
2
1
7
9
B A
C
C
C
10
DIMENSION SKETCH SCAN 68-15 AND 68-16 HT (SOAPSTONE + HIGH TOP)
A
Centre rear outlet
B
Height to the beginning of the
connecting piece at top outlet
C
Centre of fresh air intake
All measurements are in millimeters
Scan 68-7 and 68-8
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90068601
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
Scan 68-3-4-5-6-13-14-15-16
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90068602
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 400 mm - Back: 150 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
Scan 68-1 and 68-2
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90068600
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 400 mm - Front: 1100 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
Scan 68-9-10-11-12
Freestanding room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90068603
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Side: 500 mm - Back: 150 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
11
TYPE PLATE
All Scan wood-burning stoves are fitted with a type plate that specifies the approval standards and the distance to flam-
mable materials.
The type plate is located at the rear of the stove.
Typeplates
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068003.idw
90068003
Ovn bagfra
18-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
6800000
12
PRODUCT REGISTRATION NUMBER
All Scan wood-burning stoves are provided with a product registration number. You will always need to quote this number
when contacting your dealer or Scan A/S.
The product registration number is located at the rear of the stove.
ADDITIONAL ACCESSORIES
¬ Small shaped floor plate in glass or steel ¬ High Top (Scan 68-13/14)
¬ Large shaped floor plate in glass or steel ¬ High Top (Scan 68-15/16)
¬ Storage door for the Portal unit. ¬ Heat accumulating stones for high top
¬ Connecting piece for inside flue pipe, 6" ¬ Wall mounting kit for Scan 68 with high top
LOOSE PARTS
¬ Glove ¬ Dekor ring for top outlet
¬ Connecting piece 6" ¬ 4 Screw M5 x 10 mm
¬ Seal ¬ 1 Pass Screw M5 x 10 mm (UK) - Please see instructions
DISPOSAL OF PACKAGING
Your Scan stove may come supplied with the following packaging:
Wood packaging Wood packaging: after final use can be incinerated as a CO
2
neutral product or sent for recycling
Flamingotop Send for recycling or waste disposal
Foam Send for recycling or waste disposal
Plastic bags Send for recycling or waste disposal
Stretch/plastic film Send for recycling or waste disposal
ASSEMBLY
Type plate
Product registration number
Product registration number
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068097.idw
90068097
Scan 68 13/14 på palle
01-09-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 58\90358170.idw
90358170
Scan 58-7 - 10 afmontage ovn på palle
04-07-11
BC
Scan 58
VÆGT:
AREAL:
N/A
N/A
A
B
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068012.idw
90068012
oven afmonteres palle
07-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
B
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068011.idw
90068011
afmont. fra emb
24-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIM.:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
Skruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.:
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068011.idw
90068011
afmont. fra emb
24-03-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068013.idw
90068013
Ovn løftes fra palle
07-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\90068014.idw
90068014
ovn mont palle
05-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 58\90358171.idw
90358171
Plastprop for transportsikringshuller
04-07-11
BC
Scan 58
VÆGT:
AREAL:
N/A
N/A
41
2
3
5
13
REMOVAL OF PACKAGING
Check that the stove is not damaged before starting to install it.
Pull back and lift.
Please remove protection
The plastic plugs are mounted in the transport
safety holes.
Remove the two screws in the wood compartment
and lift the stove off the pallet.
B
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068019.idw
90068019
pedestal mont.
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 5 )
B
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068019.idw
90068019
pedestal mont.
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 5 )
B
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068019.idw
90068019
pedestal mont.
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 5 )
B
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068019.idw
90068019
pedestal mont.
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam
90068010
Portal sokkel mont.
18-03-2015
sr
Scan 68
VÆGT:
AREAL:
N/A
N/A
1 2
14
The stove is delivered with the screws mounted.
These must be removed before mounting the base.
MOUNTING OF THE BURN CHAMBER ON THE PEDESTAL BASEL
When the stove has been placed on the base,
the four screws must be remounted.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam
90068010
Portal sokkel mont.
18-03-2015
sr
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 5 )
B
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068019.idw
90068019
pedestal mont.
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068017.idw
90068017
portal mont
10-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
1 2
15
The stove is delivered with the screws mounted.
These must be removed before mounting the base.
MOUNTING OF THE BURN CHAMBER ON THE PORTAL BASEL
When the stove has been placed on the base,
the four screws must be remounted.
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAVN:
STI:
D
IM.:
MAT
ERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C
:\Wor
kin
g Folder\Designs\Bygningsdele\Skru
e
trækker.ipt
Plade, st. 240
Sk
ruetrækker
1
8
-01-2006
s
r
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.
:
NAVN:
STI:
D
IM.:
MAT
ERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C
:\Wor
kin
g Folder\Designs\Bygningsdele\Skru
e
trækker.ipt
Plade, st. 240
Sk
ruetrækker
1
8
-01-2006
s
r
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.
:
NAVN:
STI:
D
IM.:
MAT
ERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C
:\Wor
kin
g Folder\Designs\Bygningsdele\Skru
e
trækker.ipt
Plade, st. 240
Sk
ruetrækker
1
8
-01-2006
s
r
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.
:
NAVN:
STI:
D
IM.:
MAT
ERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C
:\Wor
kin
g Folder\Designs\Bygningsdele\Skru
e
trækker.ipt
Plade, st. 240
Sk
ruetrækker
1
8
-01-2006
s
r
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.
:
NAVN:
STI:
DIM.:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
Skruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAVN:
STI:
DIM.:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
Skruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
NAV
N
:
ST
I
:
D
IM.:
MA
T
ERIALE:
DA
TO:
SIGN
:
Scan A/S
DK-5492 Vissenbjerg
©
TG
.
N
R:E
MN
E
:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
S
k
ruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3
NR
.
:
3
1 2
5
6 7
4
16
MOUNTING OF THE DOOR ASSEMBLY
Remove the four screws under
the stove before placing the
door assembly.
Remount the door.The 4 outer screws at the
bottom are easily tightened.
Carefully push the door
assembly in from behind.
Dismount the door.First mount the four
screws at the top.
Dismount the door.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068036.idw
90068036
topafgang
23-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
Scan 68-7 and 68-8
Wall mounted room heater fired by solid fuel
Standard:
Fuel type:
Operation type:
The appliance can be operated in a shared flue.
Country
EN 13240 DoP 90068601
Wood
Intermittent
EUR
Norway
Austria
Classification
Intermittent
15a B-VG
Certificate/Standard
EN 13240
NS 3058
ELAB-2100-AUS
Approved by
Teknologisk Institut
Teknologisk Institut
Teknologisk Institut
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Scan A/S DK 5492 Vissenbjerg
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2:
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 04-2015
0,04% 556 mg/Nm³
Schweiz
Germany
LRV 11
Stufe 2
VKF
1. BlmSchV
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068066.idw
90068066
afmont af indre luft
19-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\hammer.ipt
Plade, st. 240
sn hammer
10-05-2007
sn
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
17
Is only to be removed for external air supply
Replace with the inclosed
Type plate
Must be removed, also in the
heat shield, for wall fitting
Must be removed for wall fitting
MOUNTING OF WALL-HUNG MODEL
Installation must be planned and executed in accordance with national and local building regulations.
The stove must only be fitted to a non-flammable wall. There must be no form of flammable component in the wall. In the
case of thin walls, nor must there be any behind the wall. The load-bearing capacity of the wall must be checked under all
circumstances.
To ensure correct installation we recommend that a building expert be commissioned to plan and outline the installation
with a view to subsequent approval.
For wall installation we recommend using the wall brackets supplied.
If a chimney is installed on top of a wall-hung model, the chimney must be fully self-supporting. It must not rest on the
wood-burning stove. There must be a distance of at least 6 mm between the first section and the flange on the flue collar.
Please consult a specialist.
Scan A/S disclaims all liability for the installation of wall-hung wood-burning stoves.
Use either a drilling machine with Ø 6 mm drill or
cutting nippers to remove the illustrated plates
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 68\10068900 - Manual.iam
90068010
Portal sokkel mont.
18-03-2015
sr
Scan 68
VÆGT:
AREAL:
N/A
N/A
C ( 1 : 2 )
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068053.idw
90068053
mont vægbeslag top
08-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068057.idw
90068057
ovn med ophæng
11-05-2015
hms
scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\900680054.idw
90068054
to skruer i top
08-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
C ( 1 : 2 )
C
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068053.idw
90068053
mont vægbeslag top
08-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Bygningsdele\Unbrako 4mm.ipt
Plade, st. 240
Unbrako 4mm
27-04-2007 BC
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068055.idw
90068055
Ophængsstativ
11-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
3
41
2
5
6
18
In order to mount the wall fitting to a chim-
ney made of Leca-blocks you need 6 pcs. FBS
8x70/5 US Leca screws.
The test report can be required at Scan A/S.
When the two screws have been removed,
you can lift the guide plate and put the fitting
underneath.
MOUNTING OF THE WALL FITTING ON THE STOVE
Fasten the fitting with two screws.
Remount the guide plate with the two screws.
Remove the top plate.
Remove the two screws as shown below.
Mount the top plate and the decor grid.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068061.idw
90068061
vægbeslag på væg
13-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
Min. 430 mm
511 mm
677,5 mm
169 mm
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068058.idw
90068058
klargøring til vægbeslag
12-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
x x
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068061.idw
90068061
vægbeslag på væg
13-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIM.:
MATERIALE:
DATO:
SIGN:
Scan A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Bygningsdele\Skruetrækker.ipt
Plade, st. 240
Skruetrækker
18-01-2006
sr
VÆGT:
AREAL:
0,54 kg
12726 mm^2
M3 NR.:
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90068061
justeringsskive til vægbeslag
13-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
7 8
10
9
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90068061
justeringsskive til vægbeslag
13-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
19
Draw a vertical line on the wall
(you can use a spirit level).
Use this line for the mounting of the wall fitting.
Measure from the vertical line and drill the holes.
Use the guide blocks to hold the wall fitting while
adjusting it.
Use the line or a spirit level.
Drill the necessary holes and mount the screws.
(Continued on next page)
Mount the two guide blocks.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068015.idw
90068015
ovn på væg
07-04-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
430
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068064.idw
90068064
montering på væg
18-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\CAD\Inventor 2015\Templates\Standard - Manual.idw
90068065
mont skruer væghængt
18-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 68\90068063.idw
90068063
vægbaslag ophængskruer
18-05-2015
hms
Scan 68
VÆGT:
AREAL:
N/A
N/A
11
12
13
14
20
Now the stove is ready to be mounted on the wall fitting.
Hook the stove on the wall fitting..
Mount screw and disc.
If you want an external air supply, it should be mount-
ed now. (See instructions in this manual).
The two screws under the stove must be removed,
before lifting the stove up on the wall fitting.
When the stove is in position, mount the two
screws in the bottom and the loose decor grate
on the top.
If you want a rear outlet, see page 26 in this manual.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

SCAN 68-1 Assembly And Instruction Manual

68-1
SCAN
Brand
SCAN
Model
68-1
Category
Stoves
Type
Assembly And Instruction Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents