Lifetime 60054 Owner's manual

Brand: Lifetime

Model: 60054

Type: Owner's manual

Lifetime 60054 is a sturdy, versatile product designed to enhance your outdoor relaxation experience. It features an adjustable metal tube that can be customized to your desired height using the provided adjustment plates and lever. The bench assembly, comprising a cross support, legs, and braces, provides a stable base for the 4-position table/backrest, allowing you to seamlessly switch between dining and lounging positions. Assembly requires two adults and basic tools like an 8mm and 10mm wrench, 2.5mm Allen wrench, and a pair of safety glasses.

Keep this Identiﬁcation Number in case you must contact our Customer Service Department.

MODEL N° 60054

OWNER’S MANUAL

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

There are beneﬁ ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com

and enjoy these great beneﬁ ts:

s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT

PROMOTIONS

s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU

s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED

"UTYOUWILLNEEDTOPROVIDEASALESRECEIPTTOVERIFYYOURPRODUCTPURCHASEDATEBEFOREWARRANTYSERVICEWILLBEPROVIDED

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

&ORCUSTOMERSOUTSIDETHE53OR#ANADAPLEASECONTACTTHESTOREFORASSISTANCE

**U.S. and Canada customers ONLY**

)&!33)34!.#%)3.%%$%$

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME

#ALLORVISITOUR7EBSITEFOR3ATURDAYHOURS

Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.

4OENSURESAFETYDONOTATTEMPTTOASSEMBLETHISPRODUCTWITHOUTFOLLOWINGTHEINSTRUCTIONSCAREFULLY#HECKENTIREBOXANDINSIDEALLPACKING

MATERIALFORPARTSANDORADDITIONALINSTRUCTIONMATERIAL"EFOREBEGINNINGASSEMBLYREADTHEINSTRUCTIONSANDIDENTIFYPARTSUSINGTHEHARDWARE

IDENTIlERANDPARTSLISTINTHISDOCUMENT0ROPERANDCOMPLETEASSEMBLYUSEANDSUPERVISIONAREESSENTIALTOREDUCETHERISKOFACCIDENTOR

INJURY!HIGHPROBABILITYOFSERIOUSINJURYEXISTSIFTHISSYSTEMISNOTINSTALLEDMAINTAINEDANDOROPERATEDPROPERLY

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE AND WILL VOID WARRANTY.

s4WOCAPABLEADULTSARERECOMMENDEDFORASSEMBLY

s&OLLOWANYANDALLWARNINGSANDCAUTIONSCAREFULLY

s!SSEMBLEONLEVELGROUND

s#HECKALLNUTSANDSCREWSFORTIGHTNESSBEFOREANDDURINGTHEUSAGESEASON

SAFETY INSTRUCTIONS

Instruction #1072370 B 12/21/2010

8 mm & 10 mm Wrench

  

Safety Glasses2.5 mm Allen Wrench Needle-Nosed Pliers

PAIRFOREACHPERSON

TOOLS REQUIRED FOR THIS ASSEMBLY

*TWO ADULTS REQUIRED TO

COMPLETE ASSEMBLY*

BEFORE BEGINNING ASSEMBLY

Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service

Department.



This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part

& Hardware Identiﬁ ers, and instructions

are three-letter IDs. These IDs are below

the images of the parts and hardware to

help you locate and identify the parts and

hardware during assembly. These IDs are not

necessarily on the parts themselves.

WARNING

ASSEMBLY GUIDES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

ADZX

vXv0AN(EAD3CREW

PARTS LIST

ID Item Description Qty

#2+ "ENCH!SSEMBLY 

#4+ 4ABLE4OP"ACK2EST!SSEMBLY 

#2, #ROSS3UPPORT 

#2) ,EFT,EG 

#2* 2IGHT,EG 

#42 -ETAL4UBE 

CTW Leg & Bench Assembly Hardware Bag

#3) -XXMM(EX(EAD"OLT 

#46 -XXMM(EX(EAD"OLT 

!/. -X#AP.UT 

#3( MMMM7RENCH 

ID Item Description Qty

CTX Hinge & Table Top/Back Rest Assembly Hardware Bag

#43 !DJUSTMENT&ORK 

#44 !DJUSTMENT0LATE 

#41 !DJUSTMENT,EVER 

#3* -XXMM(EX(EAD"OLT 

#46 -XXMM(EX(EAD"OLT 

!/. -X#AP.UT 

#45 #OTTER+EY 

#4, .YLOCK.UT 

#4- Xv"UTTON(EAD3CREW 

#4. v&LAT7ASHER 

#4/ 3PRING 

#40 MM!LLEN7RENCH 

#5+ v2OUND#AP0LUG 

PART ILLUSTRATIONS

!LLPARTSARESHOWNATSCALE

CRKX

"ENCH!SSEMBLY

CTKX

4ABLE4OP"ACK2EST!SSEMBLY

CRLX

#ROSS3UPPORT

PARTS IDENTIFIER

CRIX

,EFT,EG

CRJX

2IGHT,EG

CTRX

-ETAL4UBE

AONX

-X#AP.UT

AONX

-X#AP.UT

CSHX

MMMM7RENCH

CTPX

MM!LLEN7RENCH

HARDWARE IDENTIFIER

CSIX

-XXMM(EX(EAD"OLT

CSJX

-XXMM(EX(EAD"OLT

*CTTX

!DJUSTMENT0LATE

*CTSX

!DJUSTMENT&ORK

*CTQX

!DJUSTMENT,EVER

CTVX

-XXMM(EX(EAD"OLT

CTVX

-XXMM(EX(EAD"OLT

CUKX

v2OUND#AP0LUG

CTLX

.YLOCK.UT

47 mm

54 mm

52 mm

LEG & BENCH ASSEMBLY HARDWARE BAG [CTW]

(ARDWARESHOWNATACTUALSIZE

HINGE & TABLE TOP/BACK REST ASSEMBLY HARDWARE BAG [CTX]

(ARDWARESHOWNATACTUALSIZE5NLESSNOTEDOTHERWISE

CTMX

Xv"UTTON(EAD3CREW

CTNX

v&LAT7ASHER

CTOX

3PRING

CTUX

#OTTER+EY

AONX

-X#AP.UT

CSIX

-XXMM(EX(EAD"OLT

CTVX

-XXMM(EX(EAD"OLT

47 mm

52 mm

CRIX

,EFT,EG

CRJX

2IGHT,EG

LEG & BENCH ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

Safety Glasses

(ARDWARESHOWNATACTUALSIZE

CSHX

MMMM7RENCH

0ARTSSHOWNATOFACTUALSIZE

HARDWARE BAG REQUIRED: CTW

CRKX

"ENCH!SSEMBLY

CRLX

#ROSS3UPPORT

CSHX

MMMM7RENCH

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

CRJ

CSI

AONX

SEC

1.1

Lifetime Logo is on

bottom

,AYTHE Right Leg (CRJ)mATONTHEGROUNDASSHOWN)NSERTTWOM6 x 1 x 47 mm Hex-Head Bolts (CSI)THROUGHTHE

HOLESATTHEFRONTOFTHE2IGHT,EGASSHOWN

CSIX

AON

CRL

Lifetime Logo faces outward

as shown

SEC

1.2

0LACETHEHOLESONTHEENDOFTHECross Support (CRL)OVERTHETWO(EX"OLTSYOUJUSTINSERTEDINTHEPREVIOUSSTEP

3ECURETHE#ROSS3UPPORTUSINGTWOM6 x 1 Cap Nuts (AON)ASSHOWNTighten Nuts securely, but do not overtighten.

47 mm

10 mm (x2)

WARNING

$ONOTOVERTIGHTENTHE#AP.UT)FTHEENDOF

THE"OLTBREAKSTHROUGHTHEPLASTICCAPCALLOUR

#USTOMER3ERVICE$EPARTMENT%XPOSEDTHREADS

ONTHEENDOFTHE"OLTMAYCAUSESERIOUSINJURIES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

3ETDOWNTHE!SSEMBLYASSHOWN7HILEANOTHERADULTHOLDSTHE!SSEMBLYINPLACECONNECTTHELeft Leg (CRI) to

THE#ROSS3UPPORTUSINGTHEREQUIREDHARDWARETighten Nuts securely, but do not overtighten.

**TWO ADULTS REQUIRED FOR THIS STEP**

SEC

1.3

SEC

1.4

3ETABench Assembly (CRK)DOWNONTOTHE,EGSWITHTHEHOLESINTHECROSSBARSTOWARDTHEFRONTASSHOWN5SETHE

LOCATIONNUBTOALIGNTHEHOLESINTHECROSSBARSWITHTHOSEINTHE,EGS

Align these holes.

Location Nub

Cross Bar

CSI

CRI

CRK

AON

CSI

AONX

CSIX

47 mm

10 mm (x2)

WARNING

$ONOTOVERTIGHTENTHE#AP.UT

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.5

!LIGNTHEHOLESINTHELEFTMOSTBRACEINTHE"ENCHWITHTHOSEINTHE,EFT,EG3ECURETHE"ENCHTOTHE,EG

USINGTHEREQUIREDHARDWARE Tighten Nuts securely, but do not overtighten. Repeat this step for the right side of the

Bench Assembly.

Left-Most Brace

10 mm (x2)

AONX

AON

CTV

CTVX

52 mm

WARNING

$ONOTOVERTIGHTENTHE#AP.UT

HINGE & TABLE TOP/BACK REST ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

TOOLS REQUIRED

SEC

Safety Glasses

(ARDWARESHOWNATACTUALSIZE5NLESSOTHERWISENOTED

0ARTSSHOWNATOFACTUALSIZE

HARDWARE BAG REQUIRED: CTX

HARDWARE BAGS REQUIRED: CTW, CTX

CTKX

4ABLE4OP"ACK2EST!SSEMBLY

AONX

-X#AP.UT

CSJX

-XXMM(EX(EAD"OLT

CTVX

-XXMM(EX(EAD"OLT

CTLX

.YLOCK.UT

54 mm

52 mm

CTMX

Xv"UTTON(EAD3CREW

CTNX

v&LAT7ASHER

CTOX

3PRING

CTUX

#OTTER+EY

*CTTX

!DJUSTMENT0LATE

*CTSX

!DJUSTMENT&ORK

*CTQX

!DJUSTMENT,EVER

CTPX

MM!LLEN7RENCH

CSHX

MMMM7RENCH

CTRX

-ETAL4UBE

CTPX

MM!LLEN7RENCH

Needle-Nosed Pliers

CUKX

v2OUND#AP0LUG

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

CUKX

These holes must be aligned

CUK

CTR

CUK

SEC

2.1

)NSERTA1/2” Round Cap Plug (CUK) INTOEACHENDOFTHEMetal Tube (CTR)ASSHOWN

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.2

SEC

2.3

3LIDEANAdjustment Plate (CTT)OVERTHEENDOFTHE-ETAL4UBEASSHOWN

CTS

CTT

)NSERTANAdjustment Fork (CTS)INTOTHETWOHOLESNEARTHEENDOFTHE-ETAL4UBEASSHOWN(Fig. 1)&INALLYSLIDETHE

0LATEOVERTHE!DJUSTMENT&ORK(Fig. 2).

Fig. 1

Fig. 2

CTTX

.OTTO3CALE

CTSX

.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

CTT

CTU

CTUX

SEC

2.4

3LIDEASECONDAdjustment Plate (CTT)OVERTHE-ETAL4UBEANDOVERTHE!DJUSTMENT&ORKASSHOWN

SEC

2.5

)NSERTACotter Key (CTU)THROUGHTHEHOLEJUSTTOTHELEFTOFTHElRST!DJUSTMENT0LATEASSHOWNIf necessary, use a

pair of pliers or needle-nosed pliers to help insert the Cotter Key.

CTTX

.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.6

SEC

2.7

3LIDEANAdjustment Lever (CTQ)OVERTHEENDOFTHE-ETAL4UBEANDALIGNTHEHOLESINTHE!DJUSTMENT,EVERWITHTHOSE

INTHEENDOFTHE-ETAL4UBE4HENINSERTTWO#8 x 7/8” Button-Head Screws (CTM)THROUGHTHEHOLESINTHE-ETAL

4UBEANDTHE!DJUSTMENT,EVERASSHOWN3ECUREWITHTWO#8 Nylock Nuts (CTL). Repeat sections 2.1 - 2.5 for the

other end of the Metal Tube.

CTLX

CTMX

CTM

3ETTHE!SSEMBLYONTOTHE,EGSWITHTHE!DJUSTMENT0LATESONTHEOUTSIDEOFTHE,EGSANDALIGNTHEHOLESATTHE

TOPOFTHE,EGSWITHTHEHOLESANDGROOVESINTHE0LATESASSHOWN

CTQ

CTL

Align these holes

Align these holes and

grooves

Set Adjustment Fork into the nook on the

Legs as shown.

8 mm

CTQX

.OTTO3CALE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

CTNX

CTOX

SEC

2.8

)NSERTTWOM6 x 1 x 54 mm Hex-Head Bolts (CSJ)THROUGHTWO1/4” Flat Washers (CTN)THEHOLESINTHE4ABLE,EGSANDTWO

more 1/4” Flat Washers (CTN)3ECURETHE"OLTSWITHTWOM6 x 1 Cap Nuts (AON)BUTDONOTOVERTIGHTEN

Repeat this step for the

other side of the Metal Tube.

SEC

2.9

5SINGAPAIROFNEEDLENOSEDPLIERSLOOPTHEBOTTOMENDOFASpring (CTO)OVERTHEUPPER"OLTASSHOWN0ULLTHE

UPPERENDOFTHE3PRINGOVERANDINTOTHEGROOVEOFTHE!DJUSTMENT&ORKASSHOWNRepeat this step for the Spring on

the other side of the Metal Tube.

Connect the bottom loop of the Spring

to this Bolt.

Stretch the upper loop of the Spring up and

over the Adjustment Fork and into the groove.

CTO

AONX

CSJX

54 mm

10 mm (x2)

CSJ

CTN

AON

WARNING

$ONOTOVERTIGHTENTHE#AP.UT

Note: Do not overtighten Nuts

and Bolts.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.10

3ETTHETable Top/Back Rest (CTK)DOWNBETWEENTHE!DJUSTMENT0LATESBEINGSURETOALIGNTHEHOLES

CTK

Note: These two holes go toward the front as shown.

SEC

2.11

3ECURETHE4ABLE4OP"ACK2ESTTOTHE,EGSUSINGTHEHARDWARESHOWNRepeat this step for the other side of the Table

Top/Back Rest Assembly.

CTV

AON

AONX

10 mm (x2)

CTVX

52 mm

WARNING

$ONOTOVERTIGHTENTHE#AP.UT

SEC

3.1

4OCONVERTTHE4ABLETOA"ENCHORTHE"ENCHTOA4ABLESIMPLYLIFTEITHERTHELEFTORRIGHT!DJUSTMENT,EVERAND

ROTATETHE4ABLE4OP"ACK2ESTTOTHEDESIREDPOSITION

TABLE-TO-BENCH/BENCH-TO-TABLE CONVERSION

SEC

Adjustment Lever

#ONGRATULATIONSONYOUR,IFETIME

PRODUCTPURCHASE"YFOLLOWINGTHEINSTRUCTIONSBELOWYOURNEW,IFETIMEPRODUCTSHOULD

PROVIDEYOUWITHYEARSOFSERVICEANDENJOYMENT

Cleaning and Care

4HEPOLYETHYLENEPANELSARESTAINANDSOLVENTRESISTANT-OSTSTAINSCANBEREMOVEDUSINGAMILDSOAPANDASOFTBRISTLED

BRUSH!BRASIVECLEANINGMATERIALSMAYSCRATCHTHEPLASTICANDARENOTRECOMMENDED2EPAIRSCRATCHESORRUSTSPOTSON

THEMETALBYSANDINGTHEAFFECTEDAREALIGHTLYUSINGARUSTPREVENTATIVESPRAYPRIMERANDlNALLYSPRAYINGWITHAHIGHGLOSS

SPRAYENAMELPAINT!VOIDPLACINGADIRECTHEATSOURCEONORNEARSURFACESUNLESSUSINGAHEATBARRIER

CLEANING & CARE

LIFETIME 2-YEAR LIMITED FACTORY WARRANTY

LIFETIME PRODUCTS, INC. RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR

OBSOLETE.

,IFETIME0ICNIC4ABLESAREWARRANTEDTOTHEORIGINALPURCHASERTOBEFREEFROMDEFECTSINMATERIALORWORKMANSHIP

FORAPERIODOFTWOYEARSFROMTHEDATEOFORIGINALRETAILPURCHASE4HEWORDhDEFECTSvISDElNEDASIMPERFECTIONS

THATIMPAIRTHEUSEOFTHEPRODUCT$EFECTSRESULTINGFROMMISUSEABUSEORCUSTOMERNEGLIGENCEWILLVOIDTHIS

WARRANTY4HISWARRANTYDOESNOTCOVERDEFECTSDUETOALTERATIONOFACCIDENT4HISWARRANTYDOESNOTCOVERDAMAGE

CAUSEDBYVANDALISMRUSTINGhACTSOFNATUREvORANYOTHEREVENTBEYONDTHECONTROLOFTHEMANUFACTURER

4HISWARRANTYISNONTRANSFERABLEANDISEXPRESSLYLIMITEDTOTHEREPAIRORREPLACEMENTOFDEFECTIVEPRODUCT)F

THEPRODUCTISDEFECTIVEWITHINTHETERMSOFTHISWARRANTY,IFETIME0RODUCTS)NCWILLREPAIRORREPLACEDEFECTIVE

PARTSATNOCOSTTOTHEPURCHASER3HIPPINGCHARGESARENOTCOVEREDANDARETHERESPONSIBILITYOFTHEPURCHASER

4HISWARRANTYDOESNOTCOVERSCRATCHINGSCUFlNGOROTHERCOSMETICDAMAGETHATMAYRESULTFROMNORMALUSE

OFTHEPRODUCT)NADDITIONDEFECTSRESULTINGFROMINTENTIONALDAMAGECUSTOMERNEGLIGENCEORUNREASONABLEUSE

WILLVOIDTHISWARRANTY

,IABILITYFORINCIDENTALORCONSEQUENTIALDAMAGESISEXCLUDEDTOTHEEXTENTPERMITTEDBYLAW7HILEEVERYATTEMPT

ISMADETOEMBODYTHEHIGHESTDEGREEOFSAFETYINALLPRODUCTSFREEDOMFROMINJURYCANNOTBEGUARANTEED4HE

USERASSUMESALLRISKOFINJURYRESULTINGFROMTHEUSEOFTHISPRODUCT!LLMERCHANDISEISSOLDONTHISCONDITION

ANDNOREPRESENTATIVEOFTHECOMPANYMAYWAIVEORCHANGETHISPOLICY

4HISWARRANTYISINLIEUOFALLOTHERWARRANTIESEXPRESSEDORIMPLIEDINCLUDINGWARRANTIESOFMERCHANTABILITYOR

lTNESSFORUSETOTHEEXTENTPERMITTEDBY&EDERALANDSTATELAW.EITHER,IFETIME0RODUCTS)NCNORANYREPRESENTATIVE

ASSUMESANYOTHERLIABILITYINCONNECTIONWITHTHISPRODUCT4HISWARRANTYGIVESYOUSPECIlCLEGALRIGHTSANDYOU

MAYALSOHAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE

PLEASE INCLUDE YOUR DATED SALES RECEIPT AND PHOTOGRAPHS OF DAMAGED PARTS.

2%0/2402/$5#4$%&%#43).72)4).'4/

,IFETIME0RODUCTS)NC0/"OX#LEARlELD54

ORCALL-&AMTOPM-34

6ISITWWWLIFETIMECOMORCALLTOREGISTERYOURPRODUCTTODAY

FOR INTERNATIONAL WARRANTY CLAIMS:

!LLWARRANTYCLAIMSMUSTBEACCOMPANIEDBYASALESRECEIPT2EPORTALLWARRANTYCLAIMSINWRITINGTOYOUR

REGIONALSALESSUPPORTREPRESENTATIVE0LEASEINCLUDEYOURDATEDSALESRECEIPTANDPHOTOGRAPHSOFDAMAGED

PARTS

4O)DENTIFYTHEREPRESENTATIVEFORYOURREGION0LEASEVISITWWWLIFETIMECOMINTERNATIONAL

Lifetime 60054 Owner's manual

Lifetime 60054 Owner's manual

Lifetime 60054 Owner's manual

Related papers

Other documents