Page is loading ...
THE BUTTON
Quick Start Guide
MULTICONTROLLER
2
If you need help configuring The Button,
follow our guides and technical manuals available at:
manuals.fibaro.com/en/hk-button
Support
Scan the code to
read the manual
3
Package Contents
Quick Start Guide,
Quick Manuals,
Warranty Terms
DeviceMounting parts
Every The Button has a unique HomeKit Setup Code.
You will find the setup code on back cover of the Quick Start Guide.
Sticker
4
FIBARO app
homekit.fibaro.com/app
Download the FIBARO for HomeKit application from the App Store.
5
First launch
Press and turn the button counter-
clockwise to open the casing
Step 1
Remove the battery blocker
and check if the battery
is placed correctly
Step 2
Press and turn the button
clockwise to close the casing
Step 3
Fig. 1
Fig. 2
Fig. 3
press
6
Step 4
First launch
Open the FIBARO app
and tap Add accessory icon
Step 5
Application will guide you
through the pairing process
Fig. 4
If you have already set up
another accessory tap the + icon
7
First launch
Resetting the Button to factory defaults:
1. Click the Button exactly three times
2. Press and hold the Button for at least 10 seconds
3. Long beep will confirm resetting
3 x click and hold
Install the device in desired location using the attached self-adhesive pad
Step 6
Fig. 5
Fig. 7
Fig. 6
© Fibar Group S.A.
All rights reserved
Made in Poland
www.fibaro.com
105447310101
Room: ..........................................
Write down the location of the device.
HomeKit Setup Code is needed to securely add accessory
to your home. You may need it in case of re-pairing.
Remember to keep it in safe place. Nobody but you has a copy.
FIBARO cannot recover the HomeKit setup code for you.
/