Rikon 13-913 Operating instructions

Type
Operating instructions
RIKON Power Tools, Inc.
13-913M2
10 BANDSAW STAND
13-913
877-884-5167
www.rikontools.com
To Assemble:
Install one side beam (part #2) and one side panel (part #4) to a pair of legs (part #3) as shown.
Make sure that the side beam and the side panel are positioned on the inside of the legs.
Add the rubber feet (part #1) to the bottom of the legs.
Repeat this process for the second leg assembly. Now that both assemblies are complete, join them
together with two front panels (part #5) and two front beams (part #12).
Billerica, MA. 01821
ITEM NO.
1
2
3
4
5
6
DESCRIPTION
Rubber Foot
Side Beam
Legs
Side Panel
Front Panel
Hex Nut M6
QTY
4
2
4
2
2
24
ITEM NO.
7
8
9
10
11
12
DESCRIPTION
Washer 8mm
Hex Head Screw M8 x 16
Hex Nut M6
Washer 6mm
Hex Head Screw M6 x 35
Front Beam
QTY
24
24
8
8
4
2
Tools Required for Assembly
13 & 10mm or Adjustable Wrench
  • Page 1 1

Rikon 13-913 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI