Acer K10 Quick start guide

Type
Quick start guide

Acer K10: Connect effortlessly to a computer with a VGA cable and amaze your audience with crisp presentations. Its bright visuals are adjustable to suit any room, making it perfect for home theater setups. Experience immersive multimedia with crystal-clear images and lifelike colors, bringing movies and games to life.

Acer K10: Connect effortlessly to a computer with a VGA cable and amaze your audience with crisp presentations. Its bright visuals are adjustable to suit any room, making it perfect for home theater setups. Experience immersive multimedia with crystal-clear images and lifelike colors, bringing movies and games to life.

INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
Video Output
Y
Y
1
DVD player, Set-top Box
HDTV receiver
RBG
RBG
HDTV adapter
2
D-Sub
D-Sub
3
VGA, DVI
Quick Start
X INSTALLATION
1. Composite video cable
2. VGA to component/HDTV adapter
3. VGA cable
Note: Connector interface is subject to model's specifications
Y INTERFACE CONNECTOR
Connecting to a Computer
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to the
“VGA IN” connector on the projector;
connect the other end to the VGA
connector on the computer and tighten
the screws.
3. Connect one end of the AC adapter into
one end of the power cord.
4. Connect the other end of the AC adapter
into the DC IN connector on the
projector; connect the other end of the
power cord to an electrical outlet.
Powering On the Projector
1. Turn on the projector first and then the
computer.
2. Adjust the position and focus.
3. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut down.
快速入門
X 安裝
1. 混合視訊訊號線
2. VGA 對色差視訊 /HDTV 轉換器
3. VGA 訊號線
注意:連接器介面依機型規格而定
Y 介面連接器
連接電腦
1. 確認已關閉投影機與電腦的電源
2. VGA 訊號線的一端連接至投影機上的
VGA IN」連接埠,然後將 VGA 號線的
另一端連接至電腦上的 VGA 接埠並鎖緊
螺絲。
3. AC 電源轉換器的一端接上電源線的一
端。
4. AC 電源轉換器的另一端接上投影機的
DC IN」連接埠,並將電源線的另一端接
上電源插座。
開啟投影機電源
1. 請先開啟投影機,然後再開啟電腦。
2. 調整位置與對焦。
3. 開始執行簡報。
關閉投影機電源
1. 按兩下電源按鍵。
2. 請不要在投影機風扇停止運作之前從插座拔
AC 電源線。
警語與注意事項
安全事項:
1. 請勿直視投影燈源以免強光傷害您的眼睛
2. 為預防火災及觸電意外,請勿將本產品淋雨
或置於潮濕處。
正確使用方法:
1.
如長期未使用本產品請從
AC
插座拔掉電源插頭
2. 更多安全事項及正確使用方法,請參考隨附
光碟內之使用手冊。
繁體中文
English
  • Page 1 1
  • Page 2 2

Acer K10 Quick start guide

Type
Quick start guide

Acer K10: Connect effortlessly to a computer with a VGA cable and amaze your audience with crisp presentations. Its bright visuals are adjustable to suit any room, making it perfect for home theater setups. Experience immersive multimedia with crystal-clear images and lifelike colors, bringing movies and games to life.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI