Samsung SCC-C4201P User manual

Category
Security camera accessories
Type
User manual

This manual is also suitable for

WALL MOUNT ADAPTOR
SADT-100WM
Installation Manual
Installationshandbuch
Manuel D’installation
Manual De Instalación
AB68-00233A
PRINTED IN KOREA
GB
D
F
E
C
J
K
2
GB
1
Installation
Select a location that will support four times the total weight of the
product to be installed (about 32 kg).
Use the Back Plate to mark the positions of the M10 anchor
bolts/nuts on the wall, drill the holes and install the anchor
bolts/nuts.
• When installing in the corner of a wall, use the Corner Mounted Adaptor
(SADT-110CM). When installing on a pole, use the Pole Mounted Adaptor
(SADT-100PM).
If the cable pipe is installed inside the wall:
1) Pull the power cable, video-out cable and communications cable out through
the holes of the Back Plate and Wall Mounted Adaptor. Take care not
toavoid damageto the cable sleeving.
When installing with the Corner Mounted Adaptor or the Pole Mounted
Adaptor, use a PG-13.5 Cable Gland for watertightness.
If the cable pipe is installed on the wall:
1) Make a hole of 21mm in diameter on the outside of the pipe (on the side and
near the tip) and install a PG13.5 cable gland.
2) Pull the cables out to the Wall Mounted Adaptor through the cable gland.
Positions for the hole (unit: mm)
1
2
3
Summary
The Wall Mounted Adaptor (SADT-100WM) is used for the
installation of the Smartdome Camera (indoor or outdoor housing)
on walls.
Precautions Before Installation
Make sure that the proposed location can support the combined weights of the Wall
Mounted Adaptor, Outdoor Housing and Smartdome Camera (about 8 kg).
This product is designed to use M10 anchor bolts or nuts.
When installing the product on a concrete wall, use M10 anchor bolts/nuts together
with plain and spring washers.
Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
When installing the product outdoors, use interlocking devices made of stainless steel.
The Wall Mounted Adaptor may be installed directly on a wall or in conjunction with
the Corner Mounted Adaptor (SADT-110CM) or the Pole Mounted Adaptor
(SADT-100PM), in which cases a PG-13.5 cable gland should be used.
This goods should only be installed by a qualified technician using approved materials
and wiring practices in accordance with national, state, and local electrical code.
Install the Housing in accordance with the Housing
installation manual.
After installing the adaptor, apply silicon sealant around the
adaptor and between the adaptor and the wall for water
tightness.
If the wall surface is uneven, pay particular attention that no
gaps are left.
3 4
GB
Securely fasten the Wall Mounted Adaptor to the wall using
the anchor bolts/nuts.
5
8
9
Separate the dummy plate from
the housing top by removing the
two screws and attach the
waterproofing gasket.
(When attaching the gasket, take
care to align the guiding bosses
correctly with the holes in the
housing.)
Align the Wall Mounted Adaptor
bosses with the Housing holes
and assemble the Housing to the
Adaptor using four screws
(BH M4 x L22).
6
7
Wall Mount
Adaptor
Screw (BH M4 X L22)
Dummy Plate
Gasket
Boss
Gasket
attachment
after
separating
Dummy Plate
Fix the Back Plate to the Wall Mounted Adaptor using six
screws (M3 x L6). (Taking care that the gasket remains in
contact with the Wall Mounted Adaptor.)
4
Wall Mount Adaptor
Gasket
Back Plate
Product Specifications
Location for use: Indoors or outdoors
Location of installation:
Wall or vertical structure
External dimensions: See the diagram
Weight: 800g
Material: Aluminum
Suitable Temperature range:
- 40°~ 50°C
Suitable Humidity range:
0~100%
Accessories
Gasket
..................................................
1
Back Plate
...........................................
1
Screw (FH M3 X L6)
...........................
6
Screw (BH M4 X L22)
.........................
4
Cable gland (PG-13.5)
.......................
2
5
2
J
1
1
2
WALL MOUNT ADAPTOR(SADT-100WM) SMARTDOME CAMERA
OUTDOOR HOUSING
WALL MOUNT ADAPTOR OUTDOOR HOUSING SMARTDOME
CAMERA
WALL MOUNT ADAPTOR CORNER
MOUNT ADAPTOR(SADT-110CM)
POLE MOUNT ADAPTOR (SADT-100PM)
PG-13.5
WALL MOUNT ADAPTOR BACK PLATE
CORNER MOUNT ADAPTOR (SADT-110CM)
POLE MOUNT ADAPTOR(SADT-100PM)
3
3 4
J
5
6
7
8
(BH M4 x L22)
WALL MOUNT ADAPTOR
HOUSING DUMMY
PLATE
SCREW2
GASKET
GASKET HOUSING
TAPPING HOLE
BOSS
WALL MOUNT ADAPTOR BOSS
HOUSING
SCREW(BH M4
HOUSING ADAPTOR
HOUSING HOUSING
ADAPTOR ADAPTOR
SILICON SEALANT
9
BACK PLATE WALL MOUNT ADAPTOR
GASKET WALL MOUNT ADAPTOR
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Samsung SCC-C4201P User manual

Category
Security camera accessories
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI