Samsung SADT-101WM User manual

WALL MOUNT ADAPTOR

SADT-100WM

Installation Manual

Installationshandbuch

Manuel D’installation

Manual De Instalación

AB68-00233A

PRINTED IN KOREA

GB

D

F

E

C

J

K

2

GB

1

Installation

Select a location that will support four times the total weight of the

product to be installed (about 32 kg).

Use the Back Plate to mark the positions of the M10 anchor

bolts/nuts on the wall, drill the holes and install the anchor

bolts/nuts.

• When installing in the corner of a wall, use the Corner Mounted Adaptor

(SADT-110CM). When installing on a pole, use the Pole Mounted Adaptor

(SADT-100PM).

If the cable pipe is installed inside the wall:

1) Pull the power cable, video-out cable and communications cable out through

the holes of the Back Plate and Wall Mounted Adaptor. Take care not

toavoid damageto the cable sleeving.

•

When installing with the Corner Mounted Adaptor or the Pole Mounted

Adaptor, use a PG-13.5 Cable Gland for watertightness.

If the cable pipe is installed on the wall:

1) Make a hole of 21mm in diameter on the outside of the pipe (on the side and

near the tip) and install a PG13.5 cable gland.

2) Pull the cables out to the Wall Mounted Adaptor through the cable gland.

•

Positions for the hole (unit: mm)

1

2

3

Summary

The Wall Mounted Adaptor (SADT-100WM) is used for the

installation of the Smartdome Camera (indoor or outdoor housing)

on walls.

Precautions Before Installation

•

Make sure that the proposed location can support the combined weights of the Wall

Mounted Adaptor, Outdoor Housing and Smartdome Camera (about 8 kg).

•

This product is designed to use M10 anchor bolts or nuts.

•

When installing the product on a concrete wall, use M10 anchor bolts/nuts together

with plain and spring washers.

•

Each anchor bolt must be capable of withstanding an extraction force of 700 kg.

•

When installing the product outdoors, use interlocking devices made of stainless steel.

•

The Wall Mounted Adaptor may be installed directly on a wall or in conjunction with

the Corner Mounted Adaptor (SADT-110CM) or the Pole Mounted Adaptor

(SADT-100PM), in which cases a PG-13.5 cable gland should be used.

•

This goods should only be installed by a qualified technician using approved materials

and wiring practices in accordance with national, state, and local electrical code.

Install the Housing in accordance with the Housing

installation manual.

After installing the adaptor, apply silicon sealant around the

adaptor and between the adaptor and the wall for water

tightness.

If the wall surface is uneven, pay particular attention that no

gaps are left.

3 4

GB

Securely fasten the Wall Mounted Adaptor to the wall using

the anchor bolts/nuts.

5

8

9

Separate the dummy plate from

the housing top by removing the

two screws and attach the

waterproofing gasket.

(When attaching the gasket, take

care to align the guiding bosses

correctly with the holes in the

housing.)

Align the Wall Mounted Adaptor

bosses with the Housing holes

and assemble the Housing to the

Adaptor using four screws

(BH M4 x L22).

6

7

Wall Mount

Adaptor

Screw (BH M4 X L22)

Dummy Plate

Gasket

Boss

Gasket

attachment

after

separating

Dummy Plate

Fix the Back Plate to the Wall Mounted Adaptor using six

screws (M3 x L6). (Taking care that the gasket remains in

contact with the Wall Mounted Adaptor.)

4

Wall Mount Adaptor

Gasket

Back Plate

Product Specifications

Location for use: Indoors or outdoors

Location of installation:

Wall or vertical structure

External dimensions: See the diagram

Weight: 800g

Material: Aluminum

Suitable Temperature range:

- 40°~ 50°C

Suitable Humidity range:

0~100%

Accessories

Gasket

..................................................

1

Back Plate

...........................................

1

Screw (FH M3 X L6)

...........................

6

Screw (BH M4 X L22)

.........................

4

Cable gland (PG-13.5)

.......................

2

5

Page is loading ...

2

J

1

2

WALL MOUNT ADAPTOR(SADT-100WM) SMARTDOME CAMERA

OUTDOOR HOUSING

WALL MOUNT ADAPTOR OUTDOOR HOUSING SMARTDOME

CAMERA

WALL MOUNT ADAPTOR CORNER

MOUNT ADAPTOR(SADT-110CM)

POLE MOUNT ADAPTOR (SADT-100PM)

PG-13.5

WALL MOUNT ADAPTOR BACK PLATE

CORNER MOUNT ADAPTOR (SADT-110CM)

POLE MOUNT ADAPTOR(SADT-100PM)

3

3 4

J

5

6

7

8

(BH M4 x L22)

WALL MOUNT ADAPTOR

HOUSING DUMMY

PLATE

SCREW2

GASKET

GASKET HOUSING

TAPPING HOLE

BOSS

WALL MOUNT ADAPTOR BOSS

HOUSING

SCREW(BH M4

HOUSING ADAPTOR

HOUSING HOUSING

ADAPTOR ADAPTOR

SILICON SEALANT

9

BACK PLATE WALL MOUNT ADAPTOR

GASKET WALL MOUNT ADAPTOR

4

Page is loading ...

Samsung SADT-101WM User manual

This manual is also suitable for

Samsung SADT-101WM User manual

in other languages

Related papers

Other documents