Xavax Microwave Bracket User manual

Type
User manual

Xavax Microwave Bracket

The Xavax Microwave Bracket is a wall-mountable bracket designed to hold microwaves weighing up to 30 kg. It is easy to install and comes with all the necessary hardware. The bracket is made of sturdy steel and has a powder-coated finish for durability. It features two adjustable shelves that can be positioned to accommodate microwaves of different sizes. The bracket also has a built-in cord management system to keep cords neat and tidy.

The Xavax Microwave Bracket is a great way to save counter space and keep your microwave within easy reach.

Xavax Microwave Bracket

The Xavax Microwave Bracket is a wall-mountable bracket designed to hold microwaves weighing up to 30 kg. It is easy to install and comes with all the necessary hardware. The bracket is made of sturdy steel and has a powder-coated finish for durability. It features two adjustable shelves that can be positioned to accommodate microwaves of different sizes. The bracket also has a built-in cord management system to keep cords neat and tidy.

The Xavax Microwave Bracket is a great way to save counter space and keep your microwave within easy reach.

Mikrowellen-Halterung
Micr
ow
ave Br
ack
et
00110930
3
The microwave bracket is designed for a microwave
no heavier than 30 kg and saves space by allowing wall
mounting. First mount the wall bracket (1) using the wall
anchors (6) and screws (7). Now insert the two prole
rails (2) into the wall bracket. Now place the microwave
on the prole rails, distributing the weight on the rails
evenly and with as much weight as possible on the
part nearer the wall. Please note that the feet of the
microwave must be placed in the grooves of the prole
rails for a secure hold. If necessary, the microwave can
be additionally secured (e.g. by elastic straps). If the
microwave is not securely in the grooves, the prole rails
must be lengthened. To do this, push the extension rails
(3) into the prole rails and secure them using the Allen
key (5) and the locking screws (4). Due to the leverage
effect, you should only pull out the extension rails as far
as necessary.
Safety warning: For proper mounting, please have this
bracket tted by a qualied technician. Please check
that the set is complete before installation and ensure
that none of the parts are faulty or damaged. Use the
bracket for the intended purpose only. Before mounting,
check that the wall you have chosen is suitable for the
weight to be mounted. Also make sure that there are no
electric, water, gas or other pipes running through the
wall at the mounting spot. Please note in particular that
the provided wall anchors are only approved for concrete
and brick walls. If your wall is made of other material,
please purchase the appropriate installation material
from specialised dealers. To provide sufcient ventilation
for the microwave, make sure to keep a sufcient safety
distance around it.
The bracket may not be mounted at or above locations
where persons could stand. Once you have mounted
the bracket and the microwave, ensure that they are
sufciently secure and safe to use. You should repeat this
check at regular intervals (at least every three months).
Hama GmbH & Co. KG does not accept warranty claims
for improperly installed brackets or any resulting damage.
Nr./
No.
Bezeichnung/Designation
Stück/
pcs.
1Wall Bracket 1
2Force Bar 2
3Extension Bar 2
4Brake Screw 2
5Allen Key 1
6Wall Plug 6
7Wood Screw 6
g Operating Instruction
2
1
76
5
4
3
00110930/02.17
Distributed by Hama GmbH & Co KG
86652 Monheim /Germany
+49 9091 502-0
www.xavax.eu
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Xavax Microwave Bracket User manual

Type
User manual

Xavax Microwave Bracket

The Xavax Microwave Bracket is a wall-mountable bracket designed to hold microwaves weighing up to 30 kg. It is easy to install and comes with all the necessary hardware. The bracket is made of sturdy steel and has a powder-coated finish for durability. It features two adjustable shelves that can be positioned to accommodate microwaves of different sizes. The bracket also has a built-in cord management system to keep cords neat and tidy.

The Xavax Microwave Bracket is a great way to save counter space and keep your microwave within easy reach.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI