NEC NP-PX1004UL-W-18 Datasheet
- Category
- Projector mounts
- Type
- Datasheet
ISSUED: 01-11-11 SHEET NO: 120-9546-1
Peerless Industries, Inc.
2300 White Oak Circle. Aurora, IL 60502
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessindustries.com
page 1 of 2
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective own-
The Lightweight Adjustable Suspended Ceiling Plate
allows a projector to be mounted above a 2’ x 2’ or 2’ x 4’
false ceiling tile. It offers unlimited adjustability and projector
mount placement anywhere within a standard ceiling grid.
It can be used with or without an extension column and
offers two electrical knockouts. It is specically designed
for projectors and offers a low-prole, secure solution to
complement sleek, lightweight projectors.
Features:
• Includes Kwik-LocTM self locking cable joiners for simple
cable support set-up
• Unlimited projector placement above a 2’ x 2’ or 2’ x 4’
standard ceiling tile
• Escutcheon ring included for a clean nish
• Pre-assembled, easy to install design reduces installation
time
• Compact, lightweight, theft resistant design
Accessories:
• Fixed and Adjustable length Extension Columns, 1 1/2”
NPT (“EXT” or “AEC” models)
• Fixed length Extension Columns, 3/4” NPT (FLP Series)*
*Must be used in conjunction with an ACC 913,
Pipe Reducer (2 may be required)
Dimensions:
Weight:
5.2 lb (2.3 kg)
Shipping weight:
6.6 lb (2.99 kg)
Maximum Load Capacity:
60 lb (27.2 kg)
Shipping Carton dimensions:
L = 26.25 in (667 mm)
W = 13.5 in (343 mm)
H = 1.88 in (48 mm)
A R C H I T E C T S S P E C I F I C A T I O N S
The Lightweight Adjustable Suspended Ceiling Plate shall be a NEC model CMJ500R1 and shall be located where indicated on the plans. It
shall contain an adjustable collar mount plate with a 1 1/2-11.5 NPS center threaded tting and holes for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling above)
with turnbuckles to ne tune the level of the ceiling tray. The nish shall be white fused epoxy. Assembly and installation shall be done according to
instructions provided by the manufacturer.
MODEL: SCP200
TECHNICAL DATA SHEET Lightweight
Adjustable Suspended Ceiling Plate
TECHNICAL DATA SHEET
MODEL: SCP200
page 2 of 2
ISSUED: 01-11-11 SHEET NO: 120-9546-1
Peerless Industries, Inc.
2300 White Oak Circle. Aurora, IL 60502
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessindustries.com
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective own-
24.59"
(625mm)
13.90"
(353mm)
1-1/2" x 11/5 NPS
8.22"
(209mm)
1.17"
(30mm)
3.78"
(96mm)
3.25"
(82mm)
1.13"
(29mm)
2.25"
(57mm)
TOP VIEW
FRONT VIEW
ELECTRICAL KNOCKOUTS
-
1
-
2
NEC NP-PX1004UL-W-18 Datasheet
- Category
- Projector mounts
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Peerless ACC560 Datasheet
-
Peerless EXT002 Datasheet
-
-
-
-
Peerless Industries PRS-UNV-S User manual
-
-
-
-