NEC NP-PA1004UL-B Datasheet

Category
Projector mounts
Type
Datasheet
ISSUED: 01-11-11 SHEET NO: 120-9546-1
Peerless Industries, Inc.
2300 White Oak Circle. Aurora, IL 60502
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessindustries.com
page 1 of 2
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective own-
The Lightweight Adjustable Suspended Ceiling Plate
allows a projector to be mounted above a 2’ x 2’ or 2’ x 4’
false ceiling tile. It offers unlimited adjustability and projector
mount placement anywhere within a standard ceiling grid.
It can be used with or without an extension column and
offers two electrical knockouts. It is specically designed
for projectors and offers a low-prole, secure solution to
complement sleek, lightweight projectors.
Features:
• Includes Kwik-LocTM self locking cable joiners for simple
cable support set-up
• Unlimited projector placement above a 2’ x 2’ or 2’ x 4’
standard ceiling tile
• Escutcheon ring included for a clean nish
Pre-assembled, easy to install design reduces installation
time
• Compact, lightweight, theft resistant design
Accessories:
• Fixed and Adjustable length Extension Columns, 1 1/2”
NPT (“EXT” or “AEC” models)
• Fixed length Extension Columns, 3/4” NPT (FLP Series)*
*Must be used in conjunction with an ACC 913,
Pipe Reducer (2 may be required)
Dimensions:
Weight:
5.2 lb (2.3 kg)
Shipping weight:
6.6 lb (2.99 kg)
Maximum Load Capacity:
60 lb (27.2 kg)
Shipping Carton dimensions:
L = 26.25 in (667 mm)
W = 13.5 in (343 mm)
H = 1.88 in (48 mm)
A R C H I T E C T S S P E C I F I C A T I O N S
The Lightweight Adjustable Suspended Ceiling Plate shall be a NEC model CMJ500R1 and shall be located where indicated on the plans. It
shall contain an adjustable collar mount plate with a 1 1/2-11.5 NPS center threaded tting and holes for outlet boxes (Raco 445 or Appleton 383
recommended) and antenna leads. It shall feature a tie wire support system to transfer the load to four attachment points (in the true ceiling above)
with turnbuckles to ne tune the level of the ceiling tray. The nish shall be white fused epoxy. Assembly and installation shall be done according to
instructions provided by the manufacturer.
MODEL: SCP200
TECHNICAL DATA SHEET Lightweight
Adjustable Suspended Ceiling Plate

TECHNICAL DATA SHEET
MODEL: SCP200
page 2 of 2
ISSUED: 01-11-11 SHEET NO: 120-9546-1
Peerless Industries, Inc.
2300 White Oak Circle. Aurora, IL 60502
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessindustries.com
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective own-
24.59"
(625mm)
13.90"
(353mm)
1-1/2" x 11/5 NPS
8.22"
(209mm)
1.17"
(30mm)
3.78"
(96mm)
3.25"
(82mm)
1.13"
(29mm)
2.25"
(57mm)
TOP VIEW
FRONT VIEW
ELECTRICAL KNOCKOUTS
  • Page 1 1
  • Page 2 2

NEC NP-PA1004UL-B Datasheet

Category
Projector mounts
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI