Lightolier SL202B User manual

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Spectral Architectural Lighting SL202B

Page 1 of 2 Fluted Disk Fluted Forms 4-18W Quad Tube

Features

1. Form: Round form fabricated from slitted corrugated anodized aluminum.

Slits hold the sand blasted glass and reflector element. The illuminated edge

of the glass is visible through the corrugations.

2. Glass: Center sand blasted glass with clear outer ring. Image of lamps seen

through the glass to create a geometric pattern on the wall or ceiling.

3. Housing: Spun painted steel construction. Mounting plate houses the bal-

last and lamp sockets.

Mounting

Mounting: Surface mounting to wall or ceiling surfaces.

Lamp Change: Fluted housing simply twists-off. Held in place by 3 locking pins.

Luminaire Weight: 10.5 lbs.

Electrical

Ballast: Electronic T4 quad lamp ballasts. Universal voltage “U” ballast auto-

matically detect 120 volts or 277 volts operation.

F4: Programmed Rapid Start by Universal

QD: High-Performance dimming by Lightolier-Controls

Lampholder: G24q-2 base, 4 Pin.

Options and Accessories

DS: Double switching.

Consult your Lightolier representative for more information.

Perforated form: Consult your Lightolier representative for more information.

Finish

Anodized corrugated aluminum sheet with precise flutes.

All painted parts are with powder coat paint process.

Labels

UL “c/us” Listed. Suitable for damp locations.

Ordering Guide (complete unit only)

Cat. No. Lamp (circular) Volt Finish

SL202BF4U 4-18W QT 120/277V Anodized Aluminum & Sand Blasted Glass

SL202BQDU 4-18W QT 120/277V Anodized Aluminum & Sand Blasted Glass

18 1/4"

(464mm)

3 1/2"

(89 mm)