McIntosh C2300 User manual

Category
Audio amplifiers
Type
User manual

McIntosh C2300 is a versatile control center that allows users to effortlessly manage and distribute audio signals throughout their home entertainment systems. With a wide range of connectivity options, including multiple balanced and unbalanced inputs and outputs, it seamlessly integrates various audio sources like CD players, turntables, and digital devices. The C2300 provides precise volume control, source selection, and balance adjustment, ensuring an optimal listening experience.

McIntosh C2300 is a versatile control center that allows users to effortlessly manage and distribute audio signals throughout their home entertainment systems. With a wide range of connectivity options, including multiple balanced and unbalanced inputs and outputs, it seamlessly integrates various audio sources like CD players, turntables, and digital devices. The C2300 provides precise volume control, source selection, and balance adjustment, ensuring an optimal listening experience.

C2300 Rear Panel Connections
2A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04106100
Connect the C2300
power cord to a live
AC outlet. Refer to in-
formation on the back
panel of your C2300 to
determine the correct
voltage for your unit
MAIN POWER
CONTROL Out
-
put sends a turn-on
signal to a McIntosh
Component when the
C2300 is turned on
DATA PORTS send
signals to McIntosh
Source Components
to allow control with
the C2300 Remote
Control
SRVR, CDR, CD, D/A, DVD and
TUNER INPUTS accept high
level program source signals
GND terminals
accept a ground
wire from a
turntable
SRVR OUT sends
signals to the input of
a recording device
Main Fuse holder,
refer to information on
the back panel of your
C2300 to determine
the correct fuse size
and rating
PHONO MM accepts
signals from a Mov
-
ing Magnet Phono
Cartridge
CDR, CD, D/A and DVD IN
-
PUTS (Balanced) accept high
level program source signals
EXT SENSOR con
-
nector permits the
connection of a Mc-
Intosh IR Sensor for
remote operation
MAIN OUTPUTS
(Balanced) send
signals to a Power
Amplifier
MAIN OUTPUTS
send signals to a
Power Amplifier
POWER CONTROL ACC sends Turn-On signals
to McIntosh Source Components when the C2300
is On.
OUTPUT 2 and OUTPUT 1 send Turn-On signals
to McIntosh Power Amplifier(s) when activated.
POWER CONTROLS ACC, OUTPUT 2 and
OUTPUT 1 may be re-assigned as TRIGGERS
A - C to send Turn-On signals when a desired
Input Source is selected
OUTPUTS 1 and 2 (Balanced) send
signals to Power Amplifiers and
are switched On/Off with the Front
Panel Output 1 and 2 Push-Buttons
or Remote Control Push-Buttons
PASSTHRU Power
Control Input receives
a turn-on signal from
a McIntosh Home
Theater Controller
PHONO MC accepts
the low level signals
from a Moving Coil
Phono Cartridge
OUTPUTS 1 and 2 send signals to
Power Amplifiers and are switched
On/Off with the Front Panel Output
1 and 2 Push-Buttons or Remote
Control Push-Buttons
C2300 Connection Diagram 3
2B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Note: Refer to the C2300 Owner’s Manual page 9 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
*
2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to AC Outlet
McIntosh A/V Control Center
McIntosh Power Amplifier (Left Channel) - Main Room
(Partial View)
McIntosh Power Amplifier (Right Channel) - Main Room
(Partial View)
Connect to AC Outlet
  • Page 1 1
  • Page 2 2

McIntosh C2300 User manual

Category
Audio amplifiers
Type
User manual

McIntosh C2300 is a versatile control center that allows users to effortlessly manage and distribute audio signals throughout their home entertainment systems. With a wide range of connectivity options, including multiple balanced and unbalanced inputs and outputs, it seamlessly integrates various audio sources like CD players, turntables, and digital devices. The C2300 provides precise volume control, source selection, and balance adjustment, ensuring an optimal listening experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI