SignaMax 2-Port 10/100 Unmanaged Compact Industrial Switch User guide

Brand
SignaMax
Model
2-Port 10/100 Unmanaged Compact Industrial Switch
Category
Network switches
Type
User guide
SIGNAMAX 065-7403HTB
Unmanaged Industrial Ethernet Switch
User Manual
SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual
Preface
Audience
This manual is intended for network installers and system administrators who are responsible for
installing, configuring or maintaining networks. It assumes that you understand the transmission and
management protocols used on your network.
This manual also assumes prior knowledge and understanding of the terminology, theories, practices and
specific knowledge about the networking devices, protocols, and interfaces that comprise your network.
【
Overview
】
The SIGNAMAX 065-7403HTB’s reliable hardware design is ideal for non-stop industrial
communication applications. SIGNAMAX 065-7403HTB products can provide an economical solution for
your Ethernet access. The IP30 level protection shell design means the product can work reliably in harsh
and dangerous environments. LED state indicators can help the network manager monitor the network’s
connection status.
Model Port
SIGNAMAX
065-7403HTB
1x100BaseFX + 2x10/100BaseTX
【
Packing list
】
Before installing, please check if the package and accessories is complete before using this switch.
• Industrial Ethernet Switch（With terminal）1pc
• User Manual（CD）1pc
• Warranty Card 1pc
There are precise devices inside this switch. Please note gently to avoid severe vibration, and ensure the
device performance. If you find any components damaged or missing during transport, please inform our
company or distributors. We will solve the problems properly as soon as we can.
【
Feature
】
Supports IEEE802.3 and IEEE802.3u standards.
Supports Auto-Negotiation technology; detects network speed and duplex/half duplex mode
automatically.
Supports automatic MDI/MDI-X connection; supports store and forward switching mode.
Can support 12～36 V DC Dual power supplies, flexible input.
-40～75℉ (-40～75℃) Operating temperature range.
Industry-standard design, IP 30 grade protection, ripple high-strength case.
SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual
【
Mechanical design
】
065-7403HTB
：
【
Power input
】
The lower panel of SIGNAMAX 065-7403HTB switch provides industrial terminals
V-
、V+, power input is
12～36 V DC.
【
Communication interface
】
100BaseFX Optical port
100BaseFX full duplex fiber interface. Fiber interfaces should be used in pairs. TX is the optical sending
port, RX is the optical receiving port. The fiber interface supports dropped instructions, so that network
reliability can be improved efficiently.
10/100BaseT/TX
Interface
10/100BaseT/TX Ethernet interface is on the front panel of the device. Interface type is RJ45。
【
LED indicator
】
LEDs on the front panel of SIGNAMAX 065-7403HTB switch show system and port working state,
so you can find and solve problems. These meanings are shown as below:
10/100BaseTX Port
Port Indicator Status Description
Green
Green On—Port works at 100Mbps
Green Off—Port works at 10Mbps
Yellow
Yellow On—data is being transmitted.
Yellow Off— data is not being transmitted.
SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual
100BaseFX port
Port Indicator Status Description
Green
Green On and Blinking—Port Link Up, date is being transmitted.
Green On—Port Link Up
Green Off—Port Link Down
Other Indicators
Port Indicator Status Description
Power status indicator(PWR)
Yellow On—Power on
Yellow Off—Power off
【
Installation
】
Before you install, you should ensure if there is a suitable working environment, such as available power
options, enough space, whether it is close to devices that need to connect, and whether other devices are
prepared well.
This device uses a Standard 35mm DIN rail-mount. It’s very easy in most industry applications. Installation
step is shown as below:
Check the DIN-Rail installation tools and accessories (accessories have been provided with this
switch) at first;
Check whether the DIN-rail is strong enough, whether the place is suitable for mounting this switch;
Put the lower part of the DIN-rail connector onto the DIN rail (lower part with spring) , then put the
upper part of the DIN-rail mount onto the DIN-rail (lower the mount just a little, keep the equipment
balanced, and push into the upper card with a little force);
After putting the switch onto the DIN-rail, please check and ensure this product has been installed
properly.
SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual
【
Specifications
】
Applicable Standards
：
IEEE 802.3, IEEE 802.3u
Interface
：
Fiber port
RJ45：10/100BaseTX
Power supply
：
Input voltage：24 V DC（12 ~ 36 V DC); Redundant dual power supply is supported.
Input current：<0.1A @ 24 V DC
Overcurrent protection：Provided
Short circuit protection：Provided
Connector：3-PIN connector
Mechanical
：
Case：Metal with IP30 protection
Dimensions：40 x 77 x 97mm
Weight：260g
Installation：Guide rail mount or wall mount
Environment and temperature:
Work temperature：-40 ~ 167°F (-40 ~ +75°C)
Storage temperature：-40 ~ 185°F (-40 ~ +85°C）
Relative humidity： 5 ~ 95%（Non-condensing）
Standards and Certifications
：
Safety：UL 60950-1
EMI：FCC Part 15 Subpart B Class A，EN 55022 Class A
EMS：
EN 61000-4-2 (ESD) Grade 3，EN 61000-4-3 (RS) Grade 3，
EN 61000-4-4 (EFT) Grade 3，EN 61000-4-5 (Surge) Grade 3，
EN 61000-4-6 (CS) Grade 3，EN 61000-4-8 Grade 3
Impact：IEC 60068-2-27
Freefall：IEC 60068-2-32
Vibration：IEC 60068-2-6
Warranty
：
5 years
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

SignaMax 2-Port 10/100 Unmanaged Compact Industrial Switch User guide

Brand
SignaMax
Model
2-Port 10/100 Unmanaged Compact Industrial Switch
Category
Network switches
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents