Saturn Outlook 2008 User manual

Seats and Restraint Systems

........................... 1-1

Front Seats

............................................... 1-2

Rear Seats

.............................................. 1-12

Safety Belts

............................................. 1-18

Child Restraints

....................................... 1-39

Airbag System

......................................... 1-64

Restraint System Check

............................ 1-80

Features and Controls

..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

...................................... 2-10

Windows

................................................. 2-18

Theft-Deterrent Systems

............................ 2-21

Starting and Operating Your Vehicle

........... 2-25

Mirrors

.................................................... 2-39

Object Detection Systems

.......................... 2-44

OnStar

®

System

...................................... 2-47

Universal Home Remote System

................ 2-50

Storage Areas

......................................... 2-55

Sunroof

.................................................. 2-60

Instrument Panel

............................................. 3-1

Instrument Panel Overview

.......................... 3-4

Climate Controls

...................................... 3-23

Warning Lights, Gages, and Indicators

........ 3-37

Driver Information Center (DIC)

.................. 3-54

Audio System(s)

....................................... 3-82

Driving Your Vehicle

....................................... 4-1

Your Driving, the Road, and the Vehicle

....... 4-2

Towing

................................................... 4-27

Service and Appearance Care

.......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-5

Checking Things Under the Hood

............... 5-11

All-Wheel Drive

........................................ 5-43

Headlamp Aiming

..................................... 5-44

Bulb Replacement

.................................... 5-45

Windshield Wiper Blade Replacement

......... 5-48

Tires

...................................................... 5-49

Appearance Care

................................... 5-100

Vehicle Identiﬁcation

............................... 5-109

Electrical System

.................................... 5-110

Capacities and Speciﬁcations

................... 5-120

Maintenance Schedule

..................................... 6-1

Maintenance Schedule

................................ 6-2

Customer Assistance Information

.................... 7-1

Customer Assistance and Information

........... 7-2

Reporting Safety Defects

........................... 7-15

Vehicle Data Recording and Privacy

........... 7-18

Index

................................................................ 1

2008 Saturn OUTLOOK Owner Manual M

SATURN, the SATURN Emblem, and the name

OUTLOOK are registered trademarks of Saturn

Corporation. GENERAL MOTORS and GM are

registered trademarks of General Motors Corporation.

This manual includes the latest information at the

time it was printed. Saturn reserves the right to make

changes after that time without further notice.

This manual describes features that may or may not be

on your speciﬁc vehicle.

Keep this manual in the vehicle for quick reference.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer/retailer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français

auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

helminc.com

Litho in U.S.A.

Part No. 15861573 B Second Printing

©

ii

Using this Manual

Read this owner manual from beginning to end to learn

about the vehicle’s features and controls. Pictures

and words work together to explain things.

Index

To quickly locate information about the vehicle use the

Index in the back of the manual. It is an alphabetical

list of what is in the manual and the page number where

it can be found.

Safety Warnings and Symbols

There are a number of safety cautions in this book.

A box with the word CAUTION is used to tell about

things that could hurt you or others if you were to

ignore the warning.

{ CAUTION:

These mean there is something that could hurt

you or other people.

Cautions tell what the hazard is and what to do to avoid

or reduce the hazard. Read these cautions.

A circle with a slash

through it is a safety

symbol which means

“Do Not,” “Do Not do this”

or “Do Not let this happen.”

iii

Vehicle Damage Warnings

Notices are also used in this manual.

Notice: These mean there is something that could

damage your vehicle.

A notice tells about something that can damage the

vehicle. Many times, this damage would not be covered

by the vehicle’s warranty, and it could be costly.

The notice tells what to do to help avoid the damage.

When you read other manuals, you might see CAUTION

and NOTICE warnings in different colors or in different

words.

There are also warning labels on the vehicle which use

the same words, CAUTION or NOTICE.

Vehicle Symbols

The vehicle has components and labels that use

symbols instead of text. Symbols are shown along

with the text describing the operation or information

relating to a speciﬁc component, control, message,

gage, or indicator.

iv

Front Seats ......................................................1-2

Manual Seats ................................................1-2

Seat Height Adjuster .......................................1-3

Power Seats ..................................................1-3

Manual Lumbar ..............................................1-4

Power Lumbar ...............................................1-5

Heated Seats .................................................1-5

Memory Seat and Mirrors ................................1-6

Reclining Seatbacks ........................................1-8

Head Restraints ............................................1-11

Rear Seats .....................................................1-12

Rear Seat Operation .....................................1-12

Third Row Seats ...........................................1-14

Safety Belts ...................................................1-18

Safety Belts: They Are for Everyone ................1-18

How to Wear Safety Belts Properly .................1-23

Lap-Shoulder Belt .........................................1-32

Safety Belt Use During Pregnancy ..................1-38

Safety Belt Extender .....................................1-38

Child Restraints .............................................1-39

Older Children ..............................................1-39

Infants and Young Children ............................1-42

Child Restraint Systems .................................1-45

Where to Put the Restraint .............................1-48

Lower Anchors and Tethers for Children

(LATCH) ..................................................1-49

Securing a Child Restraint in a

Rear Seat Position ....................................1-57

Securing a Child Restraint in the

Right Front Seat Position ............................1-60

Airbag System ...............................................1-64

Where Are the Airbags? ................................1-66

When Should an Airbag Inﬂate? .....................1-69

What Makes an Airbag Inﬂate? .......................1-71

How Does an Airbag Restrain? .......................1-71

What Will You See After an

Airbag Inﬂates? ........................................

.1-72

Passenger Sensing System ............................1-73

Servicing Your Airbag-Equipped Vehicle ...........1-78

Adding Equipment to Your Airbag-Equipped

Vehicle ....................................................1-78

Restraint System Check ..................................1-80

Checking the Restraint Systems ......................1-80

Replacing Restraint System Parts

After a Crash ............................................1-81

Section 1 Seats and Restraint Systems

1-1

Front Seats

Manual Seats

{ CAUTION:

You can lose control of the vehicle if you try to

adjust a manual driver’s seat while the vehicle

is moving. The sudden movement could startle

and confuse you, or make you push a pedal

when you do not want to. Adjust the driver’s

seat only when the vehicle is not moving.

A. Manual Seat Adjustment Bar.

B. Driver Seat Height Adjuster. See Seat Height

Adjuster on page 1-3.

C. Manual Reclining Seatback Lever. See Reclining

Seatbacks on page 1-8.

1-2

If your vehicle has a manual bucket seat you can adjust

the seat forward or rearward with the bar located

under the front of the seat cushion.

Lift the bar to unlock the seat. Slide the seat to where

you want it and release the bar. Try to move the

seat with your body to be sure the seat is locked

in place.

Seat Height Adjuster

If your vehicle has a manual driver seat height adjuster,

it is located on the outboard side of the seat. See Manual

Seats on page 1-2 for more information. To raise the

seat, move the lever upward repeatedly until the seat is

at the desired height. To lower the seat, move the lever

downward repeatedly until the seat is at the desired

height.

Power Seats

A. Power Seat Adjustment Control.

B. Power Reclining Seatback Control. See Reclining

Seatbacks on page 1-8.

C. Power Lumbar Control. See Power Lumbar on

page 1-5.

If the vehicle has power seats, the controls used to

operate them are located on the outboard side of the

seats.

Driver’s Seat with Power Seat Control,

Power Recline, and Power Lumbar shown

1-3

Move the seat forward or rearward by sliding the control

forward or rearward.

Your vehicle may have additional features to adjust your

vehicle’s power seat:

• Raise or lower the entire seat by moving the entire

control up or down.

• Raise or lower the front part of the seat cushion by

moving the front of the control up or down.

• Raise or lower the rear part of the seat cushion by

moving the rear of the control up or down.

Your vehicle may have a memory function which allows

seat settings to be saved and recalled. See Memory

Seat and Mirrors on page 1-6 for more information.

Manual Lumbar

If your vehicle has this

feature, the handle is

located on the inboard

side of the seatback.

See Manual Seats

on page 1-2 for more

information.

Turn the handle rearward to decrease lumbar support.

Turn the handle forward to increase lumbar support.

Keep in mind that as your seating position changes,

as it may during long trips, so should the position of

your lumbar support. Adjust the seat as needed.

1-4

Power Lumbar

If the seats have power lumbar, the controls used to

operate this feature are located on the outboard side

of the seats. See Power Seats on page 1-3 for

more information.

• To increase lumbar support, press and hold the

front of the control.

• To decrease lumbar support, press and hold the

rear of the control.

• To raise the height of the lumbar support, press

and hold the top of the control.

• To lower the height of the lumbar support, press

and hold the bottom of the control.

Release the control when the lower seatback reaches

the desired level of lumbar support.

You may need to adjust the lumbar support whenever

you change your seating position.

Heated Seats

On vehicles with heated front seats the controls are

located on the center console. To operate the heated

seats the engine must be running.

I (Heated Seatback): Press this button to turn on the

heated seatback.

J (Heated Seat and Seatback): Press this button to

turn on the heated seat and seatback.

The light on the button will come on to indicate that the

feature is working. Press the button to cycle through

the temperature settings of high, medium, and low and

to turn the heat to the seat off. Indicator lights above

the button will show the level of heat selected: three

for high, two for medium, and one for low.

1-5

The passenger seat may take longer to heat up.

If your vehicle has remote vehicle start and is started

using the remote keyless entry transmitter, the front

heated seats will be turned on to the high setting if it is

cold outside. See “Remote Vehicle Start” under Remote

Keyless Entry (RKE) System Operation on page 2-5.

When the key is inserted into the ignition and the ignition

is turned on, the heated seat feature will turn off. To turn

the heated seat feature back on, press the desired

button.

Memory Seat and Mirrors

Your vehicle may have the memory package.

The controls for this feature are located on the driver’s

door panel, and are used to program and recall memory

settings for the driver’s seat and outside mirrors.

1-6

To save your positions in memory, do the following:

1. Adjust the driver’s seat, including the seatback

recliner and lumbar and both outside mirrors to

a comfortable position.

See Outside Power Mirrors on page 2-41 for more

information.

Not all mirrors will have the ability to save and

recall the mirror positions.

2. Press and hold button 1 until two beeps let you

know that the position has been stored.

A second seating and mirror position can be

programmed by repeating the above steps and

pressing button 2.

To recall the memory positions, the vehicle must be in

PARK (P). Press and release either button 1 or button 2

corresponding to the desired driving position. The

seat and outside mirrors will move to the position

previously stored. You will hear a single beep.

Using the Remote Keyless Entry (RKE) transmitter to

enter your vehicle with the remote recall memory feature

on causes automatic seat and mirror adjustment. There is

no adjustment when the position has not been changed

by another seating position or the easy exit feature.

See “MEMORY SEAT RECALL” under DIC Vehicle

Customization (With DIC Buttons) on page 3-74 for

more information.

To stop recall movement of the memory feature at any

time, press one of the power seat controls, memory

buttons, or power mirror buttons.

If something has blocked the driver’s seat while recalling

a memory position, the driver’s seat recall may stop

working. If this happens, press the appropriate control for

the area that is not recalling for two seconds, after the

obstruction is removed. Then try recalling the memory

position again by pressing the appropriate memory

button. If the memory position is still not being recalled,

see your dealer/retailer for service.

1-7

Easy Exit Seat

The control for this feature is located on the driver’s

door panel between buttons 1 and 2.

With the vehicle in PARK (P), the exit position can be

recalled by pressing the exit button. You will hear

a single beep. The driver’s seat will move back.

If the easy exit seat feature is on in the Driver

Information Center (DIC), automatic seat movement

will occur when the key is removed from the ignition.

See “EASY EXIT SEAT” under DIC Vehicle

Customization (With DIC Buttons) on page 3-74

for more information.

Further programming for the memory seat feature can

be done using the DIC. You can select or cancel

the following:

• The automatic easy exit seat feature.

• The remote memory seat recall feature.

For programming information, see DIC Vehicle

Customization (With DIC Buttons) on page 3-74.

Reclining Seatbacks

Manual Reclining Seatbacks

{ CAUTION:

You can lose control of the vehicle if you try to

adjust a manual driver’s seat while the vehicle

is moving. The sudden movement could startle

and confuse you, or make you push a pedal

when you do not want to. Adjust the driver’s

seat only when the vehicle is not moving.

1-8

{ CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

push and pull on the seatback to be sure it is

locked.

In vehicles with seats that have manual reclining

seatbacks, the lever used to operate them is located

on the outboard side of the seat.

To recline the seatback, do the following:

1. Lift the recline lever.

2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

To return the seatback to an upright position, do the

following:

1. Lift the lever fully without applying pressure to the

seatback and the seatback will return to the upright

position.

2. Push and pull on the seatback to make sure it is

locked.

1-9

Power Reclining Seatbacks

In vehicles with seats that have power reclining

seatbacks, the control used to recline them is located

on the outboard side of the seat behind the power seat

control. See Power Seats on page 1-3 for more

information.

• To recline the seatback, tilt the top of the control

rearward.

• To bring the seatback forward, tilt the top of the

control forward.

{ CAUTION:

Sitting in a reclined position when your vehicle

is in motion can be dangerous. Even if you

buckle up, your safety belts cannot do their

job when you are reclined like this.

The shoulder belt cannot do its job because it

will not be against your body. Instead, it will be

in front of you. In a crash, you could go into it,

receiving neck or other injuries.

The lap belt cannot do its job either. In a crash,

the belt could go up over your abdomen. The

belt forces would be there, not at your pelvic

bones. This could cause serious internal

injuries.

For proper protection when the vehicle is in

motion, have the seatback upright. Then sit

well back in the seat and wear your safety belt

properly.

Do not have a seatback reclined if your vehicle is

moving.

1-10

Head Restraints

Adjust the head restraint so that the top of the restraint

is at the same height as the top of the occupant’s

head. This position reduces the chance of a neck

injury in a crash.

Pull the head restraint up

to raise it. To lower the

head restraint, press the

release button, located on

the head restraint post on

the top of the seatback,

while you push the head

restraint down.

1-11

Rear Seats

Rear Seat Operation

A. Seat Adjustment Handle.

B. Reclining Seatback Strap.

C. Sliding Seat Lever.

Entering and Exiting the Third Row

{ CAUTION:

Using the third row seating position while the

second row is folded, or folded and tumbled,

could cause injury in a sudden stop or crash.

Be sure to return the seat to the passenger

seating position. Push and pull on the seat

to make sure it is locked into place.

Notice: Folding a rear seat with the safety belts

still fastened may cause damage to the seat or

the safety belts. Always unbuckle the safety belts

and return them to their normal stowed position

before folding a rear seat.

1-12

To access the third row:

1. Remove objects on the ﬂoor in front of or on the

second row seat, or in the seat tracks on the ﬂoor.

2. Move the front center console armrest completely

forward. See Center Console Storage on page 2-56

3. Place folding armrests in the upright position.

4. The safety belt must be unfastened and in the

stowed position.

5. Pull the sliding seat lever (C) forward and move the

seatback forward. The seat cushion will fold, and

the entire seat will slide forward.

Returning the Seat to the Seating

Position

To return the second row seat to its normal seating

position:

1. Remove objects on the ﬂoor behind the second row

seat, or in the seat tracks on the ﬂoor.

2. Pull the seatback rearward until it is locked in place.

3. Slide the seat rearward by pushing on the

seatback until it is locked into place.

4. Push down on the rear of the seat cushion until it is

locked in place.

5. Push and pull on the seatback and seat cushion to

make sure they are locked in place

6. Check that the safety belt is not under the seat

cushion.

Reclining the Seatbacks

To recline the seatback:

1. Leaning forward in the seat, pull the reclining

seatback strap (B).

2. Move the seatback to the desired position, then

release the strap to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

1-13

Folding the Rear Seat

To fold the second row seats:

1. Remove anything on or under the seat.

2. Place the armrest in the upright position, and

unfasten the safety belt.

3. Pull forward on the reclining seatback strap (B) and

push down on the seatback.

4. If the headrest hits the front seat, slide the second

row seat rearward.

To return the seatback to the seating position, lift the

upper corner of the seatback and push it rearward until

it locks into place. Push and pull on the seatback to

make sure it is locked.

Adjusting the Seats

To adjust the second row seats, pull outward on the

seat adjustment handle (A). Slide the seat forward or

rearward to the desired position. Release the handle

and push and pull on the seat to make sure it is locked.

Third Row Seats

{ CAUTION:

Using the third row seating position while the

second row is folded, or pushed forward in the

entry position, could cause injury in a sudden

stop or crash. Be sure to return the seat to the

passenger seating position. Push and pull on

the seat to make sure it is locked into place.

The third row seats can be folded forward or removed.

Notice: Folding a rear seat with the safety belts

still fastened may cause damage to the seat or

the safety belts. Always unbuckle the safety belts

and return them to their normal stowed position

before folding a rear seat.

1-14

To fold the seatback:

1. Remove anything on or under the seat.

2. Disconnect the rear safety belt mini-latch, using

a key in the slot on the mini-buckle, let the belt

retract into the headliner. Stow the mini-latch in

the holder located in the headliner.

3. Pull up on the release

lever located on the

back of the seat.

The headrest moves

forward automatically.

4. Push the seatback forward to lay ﬂat.

1-15

To return the seatback to the seating position:

1. Raise the seatback into place by using the pullstrap

from the rear of the vehicle, or by pushing it into

place from inside the vehicle.

2. The headrest must be locked into place before

sitting in the seat.

{ CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

push and pull on the seatback to be sure it is

locked.

3. Push and pull on the seatback to make sure it is

locked in place.

{ CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted will not provide

the protection needed in a crash. The person

wearing the belt could be seriously injured.

After raising the rear seatback, always check

to be sure that the safety belts are properly

routed and attached, and are not twisted.

4. Reconnect the center safety belt mini-latch to the

mini-buckle. Do not let it twist.

5. Pull on the safety belt to be sure the mini-latch is

secure.

1-16

Page is loading ...

Saturn Outlook 2008, 2008 Outlook, Automobile 2008 Outlook, Outlook User manual

Related papers