Bauknecht GSFP 3988-1 SG User guide

Control panel description

Installation menu selection

How to select a wash cycle

The “Info button”

Programmes

Options

Some tips for...

Best results

Loading the dishwashing machine

Troubleshooting

Instruction for use

108_00746_GB 14-06-2005 9:21 Pagina 1

108_00746_GB 14-06-2005 9:21 Pagina 2

“Intelligent Dialogue” is

the new programme for

free-standing appliances

from Bauknecht. New

intelligent and practical

functions allow more free

time for the things that

are really important in

life.

The new “Intelligent

Dialogue” dishwasher from

Bauknecht, with its direct

dialogue between man and

machine, represent a whole

new approach to operating

appliances. The new

“Intelligent Dialogue”

dishwasher from Bauknecht

speaks a completely new

appliance language. The

electronic LCD display guide

you in a focused and user-

friendly manner through all

the wash cycles and wash

functions and even actively

assist should problems arise.

Due to an innovative

interval-based washing

system, the new dishwashers

achieve better performance

with decreased consumption

of water and power. Stated

clearly: only 13 litres of water

for a cycle length that has

been reduced to 110

minutes.

The new LCD display willingly

provides information: it

“tells” how to correctly

programme the appliance,

continuously indicates cycle

lengths and time remaining,

and monitors the wash

process from start to finish.

In addition, the dishwasher’s

memory function

immediately saves, for the

next time, the most recent

wash cycle selected. And that

is not all Intelligent Dialogue

is capable of: the appliance

provides hints and tips on

how to remove stubborn

grime from kitchenware plus

a “help programme” and

suggestions on how to fix

faults. In case it should be

required, the LCD display,

also provides the telephone

number of the customer

service contact.

Thanks to proven, patented

Dynamic Sense Technology,

“senses” all on its own, just

how much water, time and

energy the dishwasher

requires in order to produce

a spotless result each time. In

this way water and energy

consumption can be reduced

by up to 30%. The

environment and your purse

will thank you for it.

You are sure to enjoy your

quality Bauknecht purchase

for a long time to come!

Dear Customer,

108_00746_GB 14-06-2005 9:21 Pagina 3

Title bar

Help bar

Window

Settings

Control panel description

Selection buttons

Press these buttons to select

programme, options or to access

information, which appear in the

window settings.

When you select a special cycle or

an option, the button lights up (i.e.

Start delay).

ON/OFF button

Turns on/off the

appliance.

The “Info button”

provides useful information concerning:

• instruction for use

• hints & tips

• troubleshooting guide

• maintenance instructions

• service information

You can access the info menu at any time,

by pressing . When the green light is on:

the button is activated.

Press again to exit.

The “Back button”

takes you to the previous selection

The “Start button”

Press this button to start a cycle.

Selection

buttons

Provides you

with

immediate

feedback on

your

selections.

Informs you

on the status of the

dishwasher and

prompts you for

certain actions.

108_00746_GB 14-06-2005 9:21 Pagina 4

Set Water Hardness

For water hardness settings

Water hardness Sensor

Press to confirm settings

Automatic hardness adjustment

during each cycle

OR:

for some models you have to set the water

hardness level manually.

Please refer to the instruction for use booklet,

chapter on “How to fill the salt container”.

The machine will show you some important

messages. Follow these and select to proceed.

The machines is now ready. Select a cycle.

The machine will automatically set the water

hardness level in order to give you directions on

salt filling,

0

These screens will appear only the first time you switch on the machine.

To change your settings: enter the button.

Installation menu selection

Set display

Select contrast and brighness

Contrast Brightness

You may need to adjust the contrast and the

brightness depending on the lightning in your

room.

Select the arrows to lighten or darken the

display.

4 9

Welcome

Select desired language

English

Français Deutsch

Nederlands Italiano

1. Press the ON/OFF button.

2. Select the desired language.

3. Confirm.

N.B.:

an audible beep sounds each time a button is

pressed.

see instruction for use booklet

108_00746_GB 14-06-2005 9:21 Pagina 5

How to select a wash cycle

AutoIntensive 1:50

Set time for Start delay

Special cycles

Half-load

00:00

AutoNormal 1:50

Press to start the selected cycle

Special cycles

Start delay

Half-load

AutoIntensive

AutoNormal

Anti-bacterial

Start delay:

You can choose to delay the start of the cycle up

to 24 hours.

Once a Start delay has been selected, the

machine will display the countdown before it

starts.

Turn on the tap and close the dishwasher.

Select the recommended wash cycle for the type of dishes and the degree of soiling. You can

view other cycles by pressing the "Special cycles" selection button.

AutoNormal 1:50

Press to start the selected cycle

Start delay

Half-load

Gentle 40°

Express 30°

Eco 50°

AutoIntensive 1:50

Press to start the selected cycle

Special cycles

Start delay

Half-load

[Auto Intensive]

Auto Normal

Anti-bacterial

Start delay

AutoIntensive 1:50

Press to start the program

Special cycles

Start delay

Upper only

Lower only

Off

Half-load

Example: Auto Intensive

The last cycle selected and the duration followed

by the remaining time are displayed.

You may press button to begin washing or

choose one or both options available:

Special cycles

Half-load:

Select the upper or lower basket. The screen will

show the rack selected.

Press ... to start wash cycle.

All options selected will be automatically

displayed.

108_00746_GB 14-06-2005 9:21 Pagina 6

AutoIntensive 1:30

The dishwasher ir operating correctly

WASHING

Interrupt

Once you have finalised your selections,

press to begin the cycle.

The display will show the selected programme,

the remaining time, the programme status and

any options selected.

When an automatic cycle is selected, the cycle

duration displayed immediately is only approxi-

mate. After 10 minutes, the sensor will calculate

the exact time remaining.

You can interrupt the cycle in order to cancel or

to modify it.

Half load

-

Programme sequence indicators

PREWASH WASH RINSE DRY

108_00746_GB 14-06-2005 9:21 Pagina 7

108_00746_GB 14-06-2005 9:21 Pagina 8

The “Info button”

Use & care

• Best Results

• Maintenance

• Help & Settings

Best results

• Golden rules

• Loading guide

• Tips

Maintenance

How to take care of

your dishwasher.

Help & Settings

• Settings

• Troubleshooting

• After-Sales Service

This button can be pressed at any time, even during a wash cycle.

Navigation system:

108_00746_GB 14-06-2005 9:21 Pagina 9

An advanced dual sensor technology optimising all resources while guaranteeing best

washing results.

The dual sensor technology:

Real evaluation of water dirtiness

- Transmission signal measures liquid dirt

- Reflection signal measures solid dirt

Continuous sensing:

- Every 10 seconds, a new measurement is taken

- The machine continuously adapts the program according to

the level of dirtiness in the water.

Easy to use No risk in selecting the wrong program:

Your machine will decide on the washing parameters by

itself.

No more need to clean by

hand

Even your dirtiest pots and pans (burnt on and dried on)

will come out perfectly clean with the sensor Intensive

programme.

Maximum savings The dual sensor system will detect when your load is

perfectly clean and stop the programme. You will use only

the amount of water, energy and time that is necessary.

Benefits

108_00746_GB 14-06-2005 9:21 Pagina 10

Programmes

AutoIntensive 60°-70°

This programme is highly recommended for your

most heavily soiled items (no more need to clean

them by hand)

It is especially adapted to all types of burnt on

and encrusted pots & pans. It should be also used

in case of dried on loads.

Anti-bacterial

Recommended for normally or heavily soiled

crockery, this programme features an additional

antibacterial action. For maximum antibacterial

effectiveness the programme must not be

interrupted (e.g. by opening the appliance door).

Gentle 40°

Use this programme for delicate items sensitive to

high temperatures, for example crystal.

Eco 50°

This programme includes an extra rinse cycle, and

is therefore recommended for heavily soiled

dishes. We recommend use of enzymatic

detergents.

AutoNormal 40°-55°

This programme is highly recommended for your

daily use. It’s especially adapted to your normally

soiled loads.

Express 30’ - 40°

Use this 30 minute programme for lightly soiled

dishes with no dried-on food or grease (butter, oil,

lard).

Main cycles

Special cycles

AutoNormal 1:50

Press to start the selected cycle

Special cycles

Start delay

Half-load

AutoIntensive

AutoNormal

Anti-bacterial

AutoNormal 1:50

Press to start the selected cycle

Start delay

Half-load

Gentle 40°

Express 30’

Eco 50°

Special cycles

108_00746_GB 14-06-2005 9:21 Pagina 11

Half load

The “Half load” wash option allows complete

load flexibility.

Half load in the upper rack only

Recommended for a daily load of 6 place settings

Benefits:

Good wash results and reduced energy and water

consumption.

Intensive wash using lower rack only

Recommended for heavily soiled dishes and for

pans and saucepans with greasy, stubborn or

burnt-on food. The high-pressure delivery of

water from the lower spray arm ensures

maximum washing capacity for dishes.

Benefits:

excellent wash results, especially during the

"AutoIntensive" programme.

Start Delay

This option can be used to delay the start of the

wash cycle until a set time.

The timer can be programmed from 1 to 24

hours.

This function makes it possible to obtain further

energy savings (see chapter on “Energy-saving

hints”).

Options

AutoIntensive 1:50

Set time for Start delay

Special cycles

Half-load

Start In

00:00

Start delay

AutoIntensive 1:50

Press to start the program

Special cycles

Start delay

Upper only

Lower only

Off

Half-load

AutoIntensive 1:50

Press to start the program

Special cycles

Start delay

Upper only

Lower only

Off

Half-load

AutoIntensive 1:50

Press to start the program

Special cycles

Start delay

Upper only

Lower only

Off

Half-load

108_00746_GB 14-06-2005 9:21 Pagina 12

Tips for obtaining best results

To ensure best results and

avoid any damage, it is

essential to load your

dishwasher properly.

Your dishwasher requires

periodical (but regular) care;

this will ensure dishes are

always perfectly clean and

will avoid any damage to the

appliance.

Ensure items of dishes do not

rub against each other and

that ceramic products do not

touch other dishes.

Detergents/Rinse aid

Only use detergents and

rinse aids specially

recommended for use in

domestic dishwashers.

Use only the recommended

amount of detergent and

rinse aid. The amount

depends on the type and

degree of soiling and on the

level of water hardness (as a

general rule, use more

detergent for heavily soiled

loads and for very hard

water). Follow the detergent

manufacturer’s directions.

If using a phosphate-free

detergent set the water

hardness selector to a higher

position than indicated in the

user instructions.

The detergent packaging

must be kept closed and

stored in a cool, dry place: if

exposed to humidity for a

prolonged period of time,

the detergent deteriorates

and can no longer be used.

Regularly check the level of

rinse aid in the dispenser in

order to obtain sparkling

clean dishes. The rinse aid

gives dishes an added shine

during the drying cycle and

prevents the formation of

unsightly spots and streaks.

Salt

Regularly check there is

sufficient regeneration salt in

the container to ensure wash

water is softened. Only use

additive-free regeneration

salt for domestic

dishwashers.

Manufacturer’s

instructions

Always read the dishes

manufacturer’s instructions

before washing. Some types

of crystal may become dull

with repeated washing.

Labels

Remove any adhesive labels

from dishes since these might

detach during the wash cycle

and cause clogging. Labels

and glue might also be

deposited on the spray arm

or pump, reducing the

performance of your

dishwasher.

Filterig system

For perfect operation, ensure

the dishwasher filter is

always clean. Clean the filter

regularly.

108_00746_GB 14-06-2005 9:21 Pagina 13

Energy-saving tips

The sensor programmes

continuously measure the

water dirtiness and adapt the

temperature, water and

program duration

accordingly, using only the

resource amount that is

really necessary to leave the

dishes clean.

If you have a reduced tariff

for electricity at night and

would like to save money,

avoid costly use of the

appliance during the day,

preferring to switch on at

night. Use the Start Delay

option.

Avoid allowing food to dry

onto dishes: this will allow

you to use a wash

programme with a lower

temperature.

If possible, always wash with

a full load. Bear in mind that

water consumption for a half

load is the same, except

when you use the Half-Load

Option and Dynamic Sense

programmes.

108_00746_GB 14-06-2005 9:21 Pagina 14

Preparing and loading dishes

Remove any food leftovers

such as bones, or toothpicks

and any other objects. It is

not necessary to rinse plates

before placing them in the

dishwasher.

Arrange dishes in such a way

that will allow for uniform

water distribution.

Bowls, soup plates and other

concave items (e.g. cups,

glasses etc.) must be loaded

downwards so that the

surface to be washed faces

the spray arms.

Make sure that lids, handles,

pans and trays do not block

the spray arm rotation The

upper rack can be raised to

avoid this happening.

If loading heavy pans or

saucepans in your

dishwasher, take care not to

drop them since this could

damage the steel of the door

or the plate holders.

If you do not have a full load,

you can avoid the formation

of unpleasant odours by

running a cold pre-wash. Do

not use detergent in this

case.

To avoid damage or

breakages, arrange china,

crystal and other delicate

items so that they do not

touch.

When loading the

dishwasher, ensure any sharp

objects cannot damage the

door seal. To obtain the best

wash results, arrange cutlery

and knives too if possible

with handles positioned

downwards. Take

precautions, however, to

ensure that children cannot

touch them.

108_00746_GB 14-06-2005 9:21 Pagina 15

Accessories

Cutlery basket

•

Use this basket only with

the Half-load option

Plate holder

•

Horizontal position:

cups, long-stemmed glasses

•

Vertical position:

plates

“Vario-Organiser”

•

The “Vario-Organiser” shelf is a

useful accessory able to hold long

utensils and tea or coffee cups.

•

You can use it in 3 different

positions:

1

a

on the left hand-side of the rack

2

a

positioned in the middle of the

rack

3

a

from the middle of the rack

towards the left hand-side

Upper

rack

Glass Holder

108_00746_GB 14-06-2005 9:21 Pagina 16

Plate holders

•

The 2 plate holders can be

folded down to position pots

and pans

Cutlery basket

•

Can be removed to

increase available space

Lower

rack

108_00746_GB 14-06-2005 9:21 Pagina 17

Upper rack height adjustment

The height can be adjusted

even with the rack loaded.

The dishwasher is

delivered with the upper

rack in the top position.

To lower:

pull out the two side handles

and gently lower the rack.

To raise:

pull up the two side handles

until the rack clicks into

place.

The rack must be level on both sides

The indicated dimensions may vary according to the inclination,

shape and depth of the plates.

108_00746_GB 14-06-2005 9:21 Pagina 18

Tips for washing special materials

Dishwasher-

suitable materials

Always check the dishes

manufacturer’s

instructions before

washing in a dishwasher.

Aluminium

High wash temperatures and

concentrated detergent can

damage the finish of some

types of aluminium.

China/Earthenware

Antique decorations, hand-

painted details and gold rims

can fade or disappear.

Crystal

Some types of lead crystal

can become dull with

repeated washing in a

dishwasher. You can minimise

this effect by selecting low

temperature wash cycles.

Glass

Opaline glass yellows with

repeated washing.

Plastic materials

Different plastics react

differently to high

temperatures and

detergents. We recommend

you place plastic items in the

upper rack.

Materials not

suitable for your

dishwasher

Cast iron

The iron rusts and the

coating detaches.

Knives with hollow

handles

Some knives have glued-on

handles, which can detach

during washing in a

dishwasher.

Tin, copper, silver

High temperatures and

detergents can result in

tarnishing and damaging to

the surface of tin, copper and

silver.

Disposable plastic cutlery

Does not withstand high

temperatures and detergents.

Tin plate

May rust.

Wooden utensils

We recommend you wash

these by hand. Read the

utensil manufacturer’s

instructions before washing

in the dishwasher. Untreated

wood may buckle, break or

deteriorate.

Bottles and cans

Must be washed by hand.

108_00746_GB 14-06-2005 9:21 Pagina 19

Full load

Upper rack Lower rack

Temperatures of programs (°C)

lightly soiled heavily soiled

Glassware x* 40 or AutoNormal 50 or AutoNormal

Coffee crockery (cups...) x 50 or AutoNormal 50 or AutoIntensive

Crockery (plates, bowls...) x x 50 or AutoNormal 50 or AutoIntensive

Pots & Pans x** x 50 or AutoNormal AutoIntensive

Half load

(if available)

Glassware x* 40 or AutoNormal 50 or AutoNormal

Coffee crockery (cups...) x 50 or AutoNormal 50 or AutoIntensive

Crockery (plates, bowls...) x x 50 or AutoNormal 50 or AutoIntensive

Pots & Pans x** x 50 or AutoNormal AutoIntensive

How to select the best programme for

your type of loads:

* Crystalware needs to be washed using the Gentle 40 °C, (use Half load option)

** If only lightly soiled, pots & pans may also be placed in the upper rack

Overview of consumption data

Programme

Water Energy Program duration

lt. kWh min.

AutoNormal 40-55°C 10-13 0,80-1,05 50-110

AutoIntensive 60-70°C 13-20 1,10-2,00 90-140

Anti-bacterial 13,0 1,50 105

Gentle 40°C 10 0,80 55

Express 30’ - 40°C 10 0,65 30

Eco 50°C * 13 1,05 110

*Reference programme for energy label in compliance with EN 50242 regulations;

Values may vary in relation to usage, e.g.: different loads, water temperatures - above or

below 15° C - as well as water hardness and power supply voltage, etc.*

108_00746_GB 14-06-2005 9:21 Pagina 20

Page is loading ...

Bauknecht GSFP 3988-1 SG User guide

This manual is also suitable for

Bauknecht GSFP 3988-1 SG User guide

Related papers

Other documents