EN
FAST FREEZE FUNCTION
The use of this function
is recommended when
placing a very high
quantity of food
to be frozen in the
freezer compartment.
24 hours before freezing
fresh food, press & hold
for 3 sec. the Freezer
button to activate the
Fast Freeze function.
When activated, the Fast
Freeze indication will be
displayed by the Freezer Temperature
LEDs as shown in the sequence.
After 24 hours place the food to be
frozen in the upper basket of freezer
compartment.
The function is automatically disabled
after 48 hours, or can be manually
disabled by pressing Freezer °C button.
DAILY USE
FUNCTIONS
ON/STANDBY FUNCTION
To put the product in Stand-by,
press and hold the On/Stand
By button for 3 seconds. All
the icons turn o except On/Standby
indicator.
To reactivate the appliance press once
(briey) the On/Stand By button.
FAST COOL FUNCTION
Using Fast Cool function
it is possible to increase
the cooling in the
refrigerator
compartment.
The use of this function
is recommended when
placing a very high
quantity of food in the
refrigerator
compartment.
Press & hold for 3 sec.
the Fridge °C button
to activate Fast Cool function. When
activated, the Fast Cool indication
will be displayed by the Fridge
Temperature LEDs as shown in the
beside sequence.
The function is automatically disabled
after 6 hours, or can be manually
disabled by pressing Fridge °C button.
6TH SENSE FRESH CONTROL
This function automatically works to
ensure the optimal conditions to
preserve the stored food.
To deactivate the “6th Sense
Fresh Control”, press and
hold Eco Night and Freezer
°C buttons at the same time
for 3 seconds until an audible
signal sounds and “6th Sense
Fresh Control” icon turns o as
conrmation that the feature
has been deactivated.
To reactivate this function
repeat the same procedure.
For a more detailed guide on functions
see the U&C guide
MAKING ICE CUBES
Fill 2/3 of the ice tray (if available) with
water and put it back in the freezer
compartment. Do not use sharp or
pointed objects to remove the ice
under any circumstances.
SMART DISPLAY
This optional function can be used to
save energy.
To activate /deactivate the
Smart Display, press and
hold Fridge °C and Freezer
°C buttons at the same time
for 3 seconds until an audible
signal sounds.
To temporary reactivate the display,
press any button. Remember that this
function does not disconnect the
appliance from the power supply, but
only reduce the power consumed by
external display (see the Use and Care
guide).
Note: When the “6th Sense Fresh
Control” is deactivated and the Smart
Display will be activated: all LEDs on the
display will turn o.
KEY LOCK
To lock/unlock the keys of the
Control Panel, press the Stop
Alarm button for 3 seconds:
the Key Lock Indicator will be
displayed for a short time and an
acoustical signal will be played.
ECO NIGHT
NIGHT TIME RATE
The Eco Night function enables
appliance energy consumption
to be concentrated in the
reduced rate hours, generally
at night.
Press Eco Night button to activate/
deactivate the Eco Night function.
FAN
To guarantee the right performance at
lower ambient temperature (colder than
18°C) and to minimize Energy
Consumption, turn o the fan. By
default the Fan is switched on.
To switch o the FAN press
and hold the Freezer °C and
Eco Night buttons for 3 sec.
To switch on the FAN repeat
the same procedure.
ANTIBACTERIAL FILTER
If the appliance has the Fan it can be
equipped with the antibacterial lter.
Remove it from the box placed in the
crisper drawer and insert into the cover
of fan. The replacement procedure is
included in the lter box.
ACTIVE ZERO DRAWER
The internal temperature of the
compartment is approximately 0° when
the compartment is turned on.
To activate/deactivate the box, press
the button as illustrated in the gure.
When the box has been activated,
the symbol lights up.