Operation
Before the rst use:
- Remove packing and advertising materials and stickers.
- Inspect the mixer and make sure that there are no damages to the device, power line cord, and plug.
- Unwind the power line cord completely.
- Clean the various accessories of your appliance in warm soapy water, rinse and dry thoroughly before use.
- Attach the hand mixer to the stand; a “click” sound will be heard. To detach the hand mixer, press the head opening button on
the side of the stand and then lift the hand mixer.
- Assemble proper beaters or dough hooks into mixer. Dough hooks are only used for mixing dough and beaters are only used
for beating eggs or similar food.
Note: For the dough hooks, the one with washer ts only into the right socket and the other with gear one can only be inserted
into the left socket (in a forward direction from the handle). The two dough hooks cannot be inserted in reverse.
- To place the mixing bowl on position, open the unit by pressing the plastic sheet with one hand and the other hand to tilt the
head. Lower the head and beaters/dough hooks into the mixing bowl. A “click” sound will be heard when the head has reached
the correct position.
- To eject the beaters/dough hooks, ensure the speed control is on “0” position. Press the head opening button to lift the head
and then press the eject button.
Instruction for Use
1. Be sure the speed control is in the “0” position and the appliance is unplugged from an electrical outlet.
2. Insert beaters or dough hooks, by placing the stem end of the beaters/dough hooks into the small/big opening on the bottom
of the mixer. Turn the beater/dough hook slightly and push in until it clicks into position.
3. Plug into an appropriate outlet.
4. Turn the mixer on and adjust speed setting by using the ON/OFF switch & speed adjustor.
5. When you have nished using it, set the speed control switch to “0” position. Unplug the appliance.
6. Press the head opening button to lift the hand mixer. While pressing the eject button, pull out the beaters/dough hooks.
ATTENTION! Do not excess the recommended operation time.
Cleaning and maintenance
ATTENTION!
- Never clean a mixer connected to mains.
- Before cleaning disconnect the device and wait for full stop of moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline, metal objects and wash-ups.
- Never submerge motor unit, its mains cable and plug in water or other liquid, do not wash the motor unit in water or in a dish
washing machine.
- Remove beaters from hand mixer before washing.
- Wipe the case of the motor unit and support with a soft wet cloth and rub it dry with a clean towel.
- The bowl and accessories can be separately washed in soapy water, then rinse well.
- Wipe and dry all the pars thoroughly.
Any other kinds of maintenance should be performed by qualied personnel in a servicing center.
Storage
- Before storage disconnect the device and wait for full stop of moving parts.
- Clean and dry the appliance before storage.
- Store the device in a cool, dry and clean place beyond the assess of children and people with limited physical and mental
abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances.
Please dispose your old appliances using appropriate collection systems.
Subject to technical modications!